# Invocation command line: # /cpu2006.v1.0/bin/runspec -c hp-cpu2006-linux64-intel.cfg -T base -r -C 8 fp # output_root was not used for this run ############################################################################ # Invocation command line: # /cpu2006/bin/runspec -a validate -c linux64-em64t-icl -r 8 -T all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 9.1 # Operating system version: Redhat Linux 9.0 # Hardware: Intel Pentium 4 and compatible Intel processors # supporting EM64T and Streaming SIMD Extensions 3 # # If your platform uses different versions, different # hardware or operates in a different mode (for # example, 32- vs. 64-bit mode), there is the possibiliy # that this configuration file may not work as-is. # # Note that issues with compilation should be directed # to the compiler vendor. Information about SPEC technical # support can be found in the techsupport document in the # Docs directory of your benchmark installation. # # Also note that this is a sample configuration. It # is expected to work for the environment in which # it was tested; it is not guaranteed that this is # the config file that will provide the best performance. # # # Note that you might find a more recent config file for # your platform with the posted results at # http://www.spec.org/cpu2006 ############################################################################ # SPEC CPU2006 Intel Linux64 EM64T config file # Mar 14 2006 Intel Compiler 9.1 for Linux64 EM64T ############################################################################ action = validate tune = base ext = dl380g5 PATHSEP = / check_md5 = 1 reportable = 1 backup_config = 0 # # These are listed as benchmark-tuning-extension-machine # default=default=default=default: CC = icc CXX = icpc FC = ifort OBJ = .o ################################################################ # # portability & libraries # default: PORTABILITY= -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 435.gromacs=default: LDPORTABILITY= -nofor_main 436.cactusADM=default: LDPORTABILITY= -nofor_main 454.calculix=default: LDPORTABILITY= -nofor_main 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 481.wrf=default: CPORTABILITY= -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language default=base=default=default: OPTIMIZE= -fast sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable default=peak=default=default: OPTIMIZE= -fast -auto_ilp32 sw_peak_ptrsize = Not Applicable PASS1_CFLAGS = -prof_gen PASS2_CFLAGS = -prof_use PASS1_FFLAGS = -prof_gen PASS2_FFLAGS = -prof_use PASS1_CXXFLAGS = -prof_gen PASS2_CXXFLAGS = -prof_use PASS1_LDFLAGS = -prof_gen PASS2_LDFLAGS = -prof_use ##################################################### # # Diego ADDED - circumvent seg fault for bwaves # #410.bwaves=peak: #feedback = 0 ##################################################### ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 55 test_sponsor = Dell Inc. hw_avail = Dec-2006 sw_avail = Nov-2006 test_date = Mar-2007 tester = Dell Inc. hw_cpu_name = Intel Xeon X5355 hw_cpu_char = 1333 MHz Bus Speed hw_cpu_mhz = 2666 hw_disk = 1 x 73 GB SAS 15K RPM hw_fpu = Integrated hw_memory = 16 GB (8 x 2 GB 667MHz CL5 DDR2 FB-DIMM SDRAM) hw_model000 = PowerEdge 1950 (Intel Xeon processor X5355, 2.66 hw_model001 = GHz) hw_ncpuorder = 1,2 chips hw_ncores = 8 hw_nchips = 2 hw_ncoresperchip = 4 hw_nthreadspercore = 1 hw_other = None sw_auto_parallel = No hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache000 = 8 MB I+D on chip per chip, 4 MB shared / 2 cores hw_tcache = None hw_ocache = None hw_vendor = Dell Inc. sw_file = ext2 sw_os000 = SuSE Linux Enterprise Server 10 EM64T sw_os001 = kernel 2.6.16.21-0.8-smp sw_state = Multi-user run level 3 sw_other = None int=default=default=default: sw_compiler001 = Intel C++ Compiler for Intel EM64T-based application, Version 9.1 sw_compiler002 = Package ID l_cc_c_9.1.044 Build no 20060925 sw_auto_parallel = No fp=default=default=default: sw_compiler000 = Intel C++ Compiler for Intel EM64T-based sw_compiler001 = applications, Version 9.1 sw_compiler002 = Package ID l_cc_c_9.1.045 Build no 20061101 sw_compiler003 = Intel Fortran Compiler for Intel EM64T-based sw_compiler004 = applications, Version 9.1 sw_compiler005 = Package ID l_fc_c_9.1.040 Build no 20061101 sw_auto_parallel = No # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl = http://pro.spec.org/private/osg/submit/cpu2006/flags/hp-ic91-flags.20070205.xml notes_plat_000 =Hardware Prefetcher disabled in BIOS notes_plat_005 =Adjacent Cache Line Prefetch disabled in BIOS notes_plat_010 ="ulimit -s unlimited" set # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000= http://www.spec.org/cpu2006/flags/dell-ic91-flags.xml