# Invocation command line:
# /work/cpu2006-v10/bin/runspec -c fsc-path25-amd64-20060907 -T all --input ref -n 3 --rate 4 -o all fp
# output_root was not used for this run
############################################################################
# AMD64 (64-bit) Linux/SuSE Pathscale v2.4 config file 
# Config file for CPU2006-kit97 (RC4a)
#####################################################################

ignore_errors = yes
tune          = base
ext           = fsc-ps25-amd64-20060907
output_format = asc,html
# teeout        = yes
teerunout     = yes
mean_anyway   = yes
reportable    = yes

#####################################################################
# Compiler
#####################################################################

sw_os=SLES 10 for AMD64/EM64T
sw_compiler = QLogic Pathscale Compiler Suite 2.5
sw_avail=Aug-2006

sw_auto_parallel = No
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = None

flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.14.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2000

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# use_submit_for_speed=1
# submit= MYMASK=\$((1<<\$SPECUSERNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECUSERNUM))` ; /usr/bin/taskset \$MYMASK $command

# submit mit numactl
submit=VALCORE=`printf '%d' \$SPECCOPYNUM` ; VALMEM=`printf '%d' \$((\$SPECCOPYNUM/2))` ; numactl --membind \$VALMEM taskset -c \$VALCORE $command

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
notes_os_000= powersave -f is applied to set CPU to maximum frequency prior to run
notes_os_005= stacksize is set to unlimited prior to run
notes_os_010 = taskset utility used to bind CPU(s) to processes
notes_os_015 = numactl utility used to assign to each chip its local memory
notes_010=
notes_015=BIOS default settings with
notes_020=Node memory interleave disabled, SRAT enabled

# notes905=taskset has been used to bind processes to CPUs

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_025=
notes_030=For information about Fujitsu Siemens Computers in your country please see:
notes_035=http://www.fujitsu-siemens.com/countries

# Blank line at the end
notes_040=

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor=Fujitsu Siemens Computers
hw_model=CELSIUS V840, AMD Opteron 2220
hw_cpu_name=AMD Opteron 2220
hw_cpu_char=Dual Core, 2.8 GHz, 2 MB L2-cache
hw_cpu_mhz=2800
hw_fpu=Integrated

hw_nchips=2
hw_ncores=4
hw_ncoresperchip=2
hw_nthreadspercore=1

hw_ncpuorder=1,2 chips
hw_pcache=64 KB I + 64 KB D on chip per core
hw_scache=1 MB I+D on chip per core
hw_tcache=None
hw_ocache=None
hw_memory000=16 GB (8x2GB DDR2-667 CL5 dual rank ECC DIMMs
hw_memory001 = registered)
hw_disk=SATA II, 80 GB
hw_other=None

sw_file=ext3
sw_state=Multi-User SuSE Run Level 3

test_sponsor=Fujitsu Siemens Computers
license_num=22
tester=Fujitsu Siemens Computers
test_date=Feb-2007
hw_avail=Feb-2007
prepared_by=Fujitsu Siemens Computers
config=
# ---- End inclusion of '/work/cpu2006-v10/config/SUT.inc'

default=default=default=default:
#####################################################################
# Compiler selection
#
#
CC           = pathcc 
CXX          = pathCC  
FC           = pathf95 

notes_000=
notes_005=Binaries are generated on an Opteron-based system running Suse 9.3.

#####################################################################
# Portability for default 64-bit code generation
#####################################################################

default=default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# INT Portability
#####################################################################

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default=default:
CPORTABILITY=  -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

#################################################################
#                                                               #
#          SPECint Tuning & Notes                               #
#                                                               #
#################################################################

int=base=default=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast

#####################################################################
# INT Peak Tuning
#####################################################################

int=peak=default=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
PASS1_CFLAGS  = -fb_create fbdata 
PASS1_CXXFLAGS  = -fb_create fbdata 
PASS1_LDFLAGS = -fb_create fbdata
PASS2_CFLAGS  = -fb_opt fbdata
PASS2_CXXFLAGS  = -fb_opt fbdata
PASS2_LDFLAGS = -fb_opt fbdata

400.perlbench=peak=default=default:
COPTIMIZE=-Ofast -IPA:plimit=525:pu_reorder=1

401.bzip2=peak=default=default:
feedback=0
COPTIMIZE=-O3 -LNO:ou_prod_max=10

403.gcc=peak=default=default:
feedback=0
COPTIMIZE=-O3 -OPT:Ofast

429.mcf=peak=default=default:
COPTIMIZE=-O2 -ipa

445.gobmk=peak=default=default:
COPTIMIZE=-O3 -OPT:alias=disjoint -LNO:simd=0:minvariant=off

454.calculix=peak=default=default:
feedback=0
#feedback slows down rather than speeds up.

456.hmmer=peak=default=default:
feedback=0
COPTIMIZE=-O2 -OPT:alias=disjoint -WOPT:aggstr=0 -CG:cflow=0

458.sjeng=peak=default=default:
COPTIMIZE=-O3 -IPA:callee_limit=5000:linear=on

462.libquantum=peak=default=default:
feedback=0
COPTIMIZE=-O3 -ipa -CG:local_fwd_sched=on -IPA:space=1000

464.h264ref=peak=default=default:
COPTIMIZE=-O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0

471.omnetpp=peak=default=default:
feedback=0
CXXOPTIMIZE= -Ofast -IPA:pu_reorder=2 -CG:gcm=off

473.astar=peak=default=default:
CXXOPTIMIZE=-Ofast

483.xalancbmk=peak=default=default:
feedback=0
CXXOPTIMIZE=-Ofast

#####################################################################
# FP Portability
#####################################################################

436.cactusADM=default=default=default:
FPORTABILITY=  -fno-second-underscore		   

447.dealII=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_TABLE_WORKAROUND

481.wrf=default=default=default:
FPORTABILITY= -fno-second-underscore
CPORTABILITY= -DSPEC_CPU_LINUX

#################################################################
#                                                               #
#                        SPECfp Tuning                          #
#                                                               #
#################################################################

fp=base=default=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
FOPTIMIZE    = -Ofast

#####################################################################
# FP Peak Tuning
#####################################################################

fp=peak=default=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
FOPTIMIZE    = -Ofast
PASS1_CFLAGS   = -fb_create fbdata
PASS2_CFLAGS   = -fb_opt fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS1_FFLAGS   = -fb_create fbdata
PASS2_FFLAGS   = -fb_opt fbdata
PASS1_LDFLAGS  = -fb_create fbdata
PASS2_LDFLAGS  = -fb_opt fbdata

410.bwaves=peak=default=default:
FOPTIMIZE=-O3 -OPT:Ofast:IEEE_arith=3 -LNO:blocking=off:ignore_feedback=off

416.gamess=peak=default=default:
FOPTIMIZE=-Ofast

433.milc=peak=default=default:
COPTIMIZE    = -Ofast

434.zeusmp=peak=default=default:
feedback=0
FOPTIMIZE=-O3 -CG:load_exe=0

435.gromacs=peak=default=default:
feedback=0
FOPTIMIZE=-O3 -OPT:rsqrt=2:ro=3
COPTIMIZE=-O3 -OPT:rsqrt=2:ro=3

436.cactusADM=peak=default=default:
COPTIMIZE=-O3 -LNO:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa
FOPTIMIZE=-O3 -LNO:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa

437.leslie3d=peak=default=default:
feedback=0
#Conclusions on train data set not valid for ref.
FOPTIMIZE=-O3 -OPT:Ofast

444.namd=peak=default=default:
CXXOPTIMIZE=-Ofast

447.dealII=peak=default=default:
CXXOPTIMIZE=-Ofast -fno-exceptions
feedback=0

450.soplex=peak=default=default:
feedback=0
CXXOPTIMIZE=-O3 -OPT:IEEE_arith=3 -CG:load_exe=0:movnti=1 -LNO:minvariant=off -fno-exceptions

453.povray=peak=default=default:
CXXOPTIMIZE=-Ofast -fno-fast-math

454.calculix=peak=default=default:
FOPTIMIZE=-Ofast
COPTIMIZE=-Ofast

459.GemsFDTD=peak=default=default:
basepeak=true

465.tonto=peak=default=default:
basepeak=yes

481.wrf=peak=default=default:
basepeak=yes
#feedback=0
#FOPTIMIZE= -O3 -OPT:Ofast:ro=3
#COPTIMIZE= -O3 -OPT:Ofast:ro=3

482.sphinx3=peak=default=default:
COPTIMIZE=-O3 -LNO:sclrze=off:prefetch=1