| CPU2006 license: | 22 | Test date: | Feb-2007 |
|---|---|---|---|
| Test sponsor: | Fujitsu Siemens Computers | Hardware Availability: | Feb-2007 |
| Tested by: | Fujitsu Siemens Computers | Software Availability: | Aug-2006 |
| Hardware | |
|---|---|
| CPU Name: | AMD Opteron 2220 |
| CPU Characteristics: | Dual Core, 2.8 GHz, 2 MB L2-cache |
| CPU MHz: | 2800 |
| FPU: | Integrated |
| CPU(s) enabled: | 4 cores, 2 chips, 2 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 64 KB I + 64 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per core |
| L3 Cache: | None |
| Other Cache: | None |
| Memory: | 16 GB (8x2GB DDR2-667 CL5 dual rank ECC DIMMs registered) |
| Disk Subsystem: | SATA II, 80 GB |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | SLES 10 for AMD64/EM64T |
| Compiler: | QLogic Pathscale Compiler Suite 2.5 |
| Auto Parallel: | No |
| File System: | ext3 |
| System State: | Multi-User SuSE Run Level 3 |
| Base Pointers: | 32/64-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | SmartHeap 8.0 32 bit Library for Linux |
Results Table
| Benchmark | Base | Peak | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||
| 400.perlbench | 784 | 12.5 | 783 | 12.5 | 799 | 12.2 | 652 | 15.0 | 650 | 15.0 | 655 | 14.9 |
| 401.bzip2 | 947 | 10.2 | 949 | 10.2 | 950 | 10.2 | 935 | 10.3 | 931 | 10.4 | 932 | 10.4 |
| 403.gcc | 825 | 9.76 | 831 | 9.69 | 839 | 9.60 | 692 | 11.6 | 693 | 11.6 | 693 | 11.6 |
| 429.mcf | 1219 | 7.48 | 1225 | 7.45 | 1222 | 7.46 | 839 | 10.9 | 839 | 10.9 | 840 | 10.9 |
| 445.gobmk | 745 | 14.1 | 743 | 14.1 | 744 | 14.1 | 642 | 16.3 | 643 | 16.3 | 642 | 16.3 |
| 456.hmmer | 707 | 13.2 | 709 | 13.2 | 703 | 13.3 | 589 | 15.8 | 590 | 15.8 | 575 | 16.2 |
| 458.sjeng | 939 | 12.9 | 940 | 12.9 | 938 | 12.9 | 869 | 13.9 | 872 | 13.9 | 870 | 13.9 |
| 462.libquantum | 1270 | 16.3 | 1266 | 16.4 | 1267 | 16.3 | 1261 | 16.4 | 1265 | 16.4 | 1266 | 16.4 |
| 464.h264ref | 1050 | 21.1 | 1065 | 20.8 | 1043 | 21.2 | 986 | 22.4 | 1007 | 22.0 | 985 | 22.5 |
| 471.omnetpp | 643 | 9.72 | 641 | 9.74 | 645 | 9.70 | 642 | 9.74 | 642 | 9.73 | 642 | 9.73 |
| 473.astar | 720 | 9.76 | 718 | 9.78 | 719 | 9.77 | 697 | 10.1 | 695 | 10.1 | 695 | 10.1 |
| 483.xalancbmk | 467 | 14.8 | 469 | 14.7 | 469 | 14.7 | 458 | 15.1 | 458 | 15.1 | 458 | 15.1 |
Operating System Notes
powersave -f is applied to set CPU to maximum frequency prior to run stacksize is set to unlimited prior to run
General Notes
Binaries are generated on an Opteron-based system
running SuSE 9.3 (Kernel 2.6.5.7)
BIOS default settings with
Node memory interleave disabled, SRAT enabled
For information about Fujitsu Siemens Computers in your country please see:
http://www.fujitsu-siemens.com/countries
Base Portability Flags
| 400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
| 401.bzip2: | -DSPEC_CPU_LP64 |
| 403.gcc: | -DSPEC_CPU_LP64 |
| 429.mcf: | -DSPEC_CPU_LP64 |
| 445.gobmk: | -DSPEC_CPU_LP64 |
| 456.hmmer: | -DSPEC_CPU_LP64 |
| 458.sjeng: | -DSPEC_CPU_LP64 |
| 462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
| 464.h264ref: | -DSPEC_CPU_LP64 |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
Base Optimization Flags
C benchmarks:
| -Ofast |
C++ benchmarks:
| -Ofast -m32 -L/spec/mpaton/6v1.0/amd512K8.lib/microquill/lib -lsmartheap |
Peak Portability Flags
| 400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
| 401.bzip2: | -DSPEC_CPU_LP64 |
| 445.gobmk: | -DSPEC_CPU_LP64 |
| 456.hmmer: | -DSPEC_CPU_LP64 |
| 458.sjeng: | -DSPEC_CPU_LP64 |
| 462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
| 464.h264ref: | -DSPEC_CPU_LP64 |
| 483.xalancbmk: | -DSPEC_CPU_LINUX |
Peak Optimization Flags
C benchmarks:
| 400.perlbench: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -Ofast |
| 401.bzip2: | -O3 -LNO:ou_prod_max=10 -OPT:Ofast -OPT:alias=disjoint |
| 403.gcc: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -m32 -O3 -OPT:Ofast |
| 429.mcf: | -m32 -O2 -ipa -L/spec/mpaton/6v1.0/amd512K8.lib/microquill/lib -lsmartheap |
| 445.gobmk: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -OPT:alias=disjoint -LNO:simd=0 -LNO:minvariant=off -WOPT:retype_expr=on |
| 456.hmmer: | -O2 -OPT:alias=disjoint -WOPT:aggstr=0 -CG:cflow=0 |
| 458.sjeng: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -IPA:plimit=50000 -IPA:pu_reorder=2 |
| 462.libquantum: | -O3 -ipa -CG:local_fwd_sched=on -IPA:space=1000 |
| 464.h264ref: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0 |