SPEC® CFP2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Fujitsu Siemens Computers

PRIMERGY TX300 S3, Intel Xeon processor 5160, 3.0
GHz

CPU2006 license: 22 Test date: Jan-2007
Test sponsor: Fujitsu Siemens Computers Hardware Availability: Jul-2006
Tested by: Fujitsu Siemens Computers Software Availability: Nov-2006
Benchmark results graph
Hardware
CPU Name: Intel Xeon 5160
CPU Characteristics: 5160
CPU MHz: 3000
FPU: Integrated
CPU(s) enabled: 4 cores, 2 chips, 2 cores/chip
CPU(s) orderable: 1,2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 4 MB I+D on chip per chip
L3 Cache: None
Other Cache: None
Memory: 16 GB (8x2 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5,
with ECC)
Disk Subsystem: SAS (73GB 15400 rpm)
Other Hardware: None
Software
Operating System: 64-Bit SUSE LINUX Enterprise Server 10, Kernel
2.6.16.21-0.8-smp on an x86_64
Compiler: Intel C++ Compiler for Linux64 EM64T version 9.1
Build 20061101, Package-ID l_cc_p_9.1.045
Intel Fortran Compiler for Linux64 EM64T version
9.1
Build 20061101 Package ID: l_fc_p_9.1.040
Auto Parallel: No
File System: NTFS
System State: Default
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other Software: None

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves 4 1551 35.0 1558 34.9 1557 34.9 4 1551 35.0 1552 35.0 1557 34.9
416.gamess 4 953 82.2 951 82.4 952 82.3 4 953 82.2 951 82.4 952 82.3
433.milc 4 1603 22.9 1602 22.9 1608 22.8 4 1603 22.9 1602 22.9 1608 22.8
434.zeusmp 4 763 47.7 764 47.7 764 47.7 4 763 47.7 764 47.7 764 47.7
435.gromacs 4 402 71.0 402 71.0 402 71.0 4 384 74.3 386 74.0 386 74.1
436.cactusADM 4 891 53.6 895 53.4 894 53.5 4 891 53.6 895 53.4 894 53.5
437.leslie3d 4 1530 24.6 1535 24.5 1532 24.5 4 1530 24.6 1535 24.5 1532 24.5
444.namd 4 511 62.8 511 62.8 511 62.8 4 511 62.8 511 62.8 511 62.8
447.dealII 4 528 86.7 528 86.7 528 86.6 4 520 88.0 534 85.7 519 88.1
450.soplex 4 1182 28.2 1180 28.3 1180 28.3 4 1182 28.2 1180 28.3 1180 28.3
453.povray 4 256 83.2 258 82.6 256 83.1 4 196 108   196 108   196 109  
454.calculix 4 553 59.7 551 59.9 556 59.4 4 541 61.0 542 60.8 538 61.3
459.GemsFDTD 4 1903 22.3 1889 22.5 1905 22.3 4 1903 22.3 1889 22.5 1905 22.3
465.tonto 4 735 53.5 736 53.5 738 53.4 4 716 55.0 715 55.1 715 55.0
470.lbm 4 2900 19.0 2900 18.9 2901 18.9 4 2900 19.0 2900 18.9 2901 18.9
481.wrf 4 1005 44.5 1005 44.5 1012 44.1 4 1005 44.5 1005 44.5 1012 44.1
482.sphinx3 4 1916 40.7 1920 40.6 1917 40.7 4 1916 40.7 1920 40.6 1917 40.7

Operating System Notes

'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run

General Notes


The system bus runs at 1333 MHz

This result was measured on the PRIMERGY RX300 S3. The PRIMERGY RX300 S3 and
the PRIMERGY TX300 S3 are electronically equivalent.


For information about Fujitsu Siemens Computers in your country please see:
http://www.fujitsu-siemens.com/countries

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

410.bwaves:  -DSPEC_CPU_LP64 
416.gamess:  -DSPEC_CPU_LP64 
433.milc:  -DSPEC_CPU_LP64 
434.zeusmp:  -DSPEC_CPU_LP64 
435.gromacs:  -DSPEC_CPU_LP64   -nofor_main 
436.cactusADM:  -DSPEC_CPU_LP64   -nofor_main 
437.leslie3d:  -DSPEC_CPU_LP64 
444.namd:  -DSPEC_CPU_LP64 
447.dealII:  -DSPEC_CPU_LP64 
450.soplex:  -DSPEC_CPU_LP64 
453.povray:  -DSPEC_CPU_LP64 
454.calculix:  -DSPEC_CPU_LP64   -nofor_main 
459.GemsFDTD:  -DSPEC_CPU_LP64 
465.tonto:  -DSPEC_CPU_LP64 
470.lbm:  -DSPEC_CPU_LP64 
481.wrf:  -DSPEC_CPU_LP64   -DSPEC_CPU_CASE_FLAG   -DSPEC_CPU_LINUX 
482.sphinx3:  -DSPEC_CPU_LP64 

Base Optimization Flags

C benchmarks:

 -fast 

C++ benchmarks:

 -fast 

Fortran benchmarks:

 -fast 

Benchmarks using both Fortran and C:

 -fast 

Peak Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

433.milc:  basepeak = yes 
470.lbm:  basepeak = yes 
482.sphinx3:  basepeak = yes 

C++ benchmarks:

444.namd:  basepeak = yes 
447.dealII:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
450.soplex:  basepeak = yes 
453.povray:  Same as 447.dealII 

Fortran benchmarks:

410.bwaves:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
416.gamess:  basepeak = yes 
434.zeusmp:  basepeak = yes 
437.leslie3d:  basepeak = yes 
459.GemsFDTD:  basepeak = yes 
465.tonto:  Same as 410.bwaves 

Benchmarks using both Fortran and C:

435.gromacs:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
436.cactusADM:  basepeak = yes 
454.calculix:  Same as 435.gromacs 
481.wrf:  basepeak = yes 

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.10.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.10.xml.