# Invocation command line: # C:\spec2000\bin\runspec -c TX200S2.ic81.cfg -i ref -n 3 -o all all ############################################################################ ##################################################################################### # SPEC CPU2000 Intel Windows Server 2003 32-bit config file for Pentium 4 with SSE3 # # Feb 18 2005. Intel Compiler 8.1 Product 20041019Z # ##################################################################################### VENDOR = Fujitsu Siemens Computers action = validate tune = all ext = v1.2.ic81p.win32.nat PATHSEP = / basepeak = true check_md5=1 reportable=1 ################################################################### # These sections are listed as benchmark-tuning-extension-machine # ################################################################### default=default=default=default: CC = icl CXX = icl F77 = ifort FC = ifort OBJ = .obj ########################### # portability & libraries # ########################### 176.gcc=default=default=default: CPORTABILITY = -Dalloca=_alloca /F10000000 EXTRA_LDFLAGS = /F10000000 notes004= 176.gcc: -Dalloca=_alloca /F10000000 178.galgel=default=default=default: EXTRA_FFLAGS = -FI /F32000000 EXTRA_LDFLAGS = /F32000000 notes004= 178.galgel: -FI /F32000000 186.crafty=default=default=default: CPORTABILITY = -DNT_i386 notes005= 186.crafy: -DNT_i386 252.eon=base=default=default: srcalt=stdcpp notes006= 252.eon: -Approved srcalt stdcpp is used 253.perlbmk=default=default=default: CPORTABILITY = -DSPEC_CPU2000_NTOS -DPERLDLL /MT EXTRA_LDFLAGS = /MT notes007= 253.perlbmk: -DSPEC_CPU2000_NTOS -DPERLDLL /MT 254.gap=default=default=default: CPORTABILITY = -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO notes008= 254.gap: -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO ######################### # Baseline Tuning Flags # ######################### int=base=default=default: PASS1_CFLAGS= -fast -Qprof_gen PASS2_CFLAGS= -fast -Qprof_use PASS1_LDFLAGS= -fast -Qprof_gen PASS2_LDFLAGS= -fast -Qprof_use EXTRA_LIBS= shlW32M.lib notes000= GENERAL notes001= +FDO: PASS1=-Qprof_gen PASS2=-Qprof_use notes002= notes009= notes010= Base tuning flags notes011= for C programs: -fast +FDO shlW32M.lib notes012= for C++ programs: -fast -Qcxx_features +FDO notes013= 252.eon=base=default=default: PASS1_CXXFLAGS= -fast -Qcxx_features -Qprof_gen PASS2_CXXFLAGS= -fast -Qcxx_features -Qprof_use PASS1_LDFLAGS= -fast -Qcxx_features -Qprof_gen PASS2_LDFLAGS= -fast -Qcxx_features -Qprof_use fp=base=default=default: PASS1_CFLAGS= -fast -Qansi_alias -Qprof_gen PASS2_CFLAGS= -fast -Qansi_alias -Qprof_use PASS1_FFLAGS= -fast -Qansi_alias -Qprof_gen PASS2_FFLAGS= -fast -Qansi_alias -Qprof_use PASS1_LDFLAGS= -fast -Qansi_alias -Qprof_gen PASS2_LDFLAGS= -fast -Qansi_alias -Qprof_use EXTRA_LIBS= shlW32M.lib notes000= GENERAL notes001= +FDO: PASS1= -Qprof_gen PASS2=-Qprof_use notes002= notes005= notes006= Base tuning flags notes007= -fast -Qansi_alias +FDO shlw32M.lib notes008= ###################### # System information # ###################### default=default=default=default: notes110= notes111=The system bus runs at 800 MHz ################################### # About Fujitsu Siemens Computers # ################################### notes200= notes201=For information about Fujitsu Siemens Computers in your country please see: notes202=http://www.fujitsu-siemens.com/countries ############################## # Systsem config information # ############################## default=default=default=default: hw_vendor=Fujitsu Siemens Computers hw_model=PRIMERGY TX200 S2, 64-bit Intel XEON processor 3.40 GHz hw_cpu=64-bit Intel XEON processor (3.40 GHz, 800 MHz bus) hw_cpu_mhz=3400 hw_fpu=Integrated hw_ncpu=1 core, 1 chip, 1 core/chip (Hyper-Threading Technology disabled) hw_ncpuorder=1,2 hw_parallel=No hw_pcache=12k micro-ops I + 16KBD on chip hw_scache=2048KB(I+D) on chip hw_tcache=N/A hw_ocache=N/A hw_memory=4x1024 MB DDR-RAM PC-2700R hw_disk=Fujitsu MAS3184NC (SCSI U320 15 krpm) hw_other= sw_file=NTFS sw_state=default company_name=Fujitsu Siemens Computers machine_name=PRIMERGY TX200 S2, 64-bit Intel XEON processor 3.40 GHz license_num=22 tester_name=Fujitsu Siemens Computers test_date=May-2005 hw_avail=Mar-2005 sw_avail=Mar-2005 prepared_by=Fujitsu Siemens Computers config=TX200S2.ic81.cfg ################################################## # Software information (Compilers and libraries) # ################################################## int=default=default=default: sw_os=Windows Server 2003 Enterprise Edition + SP1 sw_compiler1=Intel C++ Compiler 8.1 Build 20050405Z sw_compiler2=Microsoft Visual Studio .Net 2003 7.1.3088 (for libraries) sw_compiler3=SmartHeap Library Version 6.03a from http://www.microquill.com notes003= Portability flags notes014= Peak tuning flags notes015= same as baseline (basepeak=yes set globally) fp=default=default=default: sw_os=Windows Server 2003 Enterprise Edition + SP1 sw_compiler1=Intel C++ and Fortran Compiler 8.1 Build 20050405 sw_compiler2=Microsoft Visual Studio .Net 2003 7.1.3088 (for libraries) sw_compiler3=SmartHeap Library Version 6.03a from http://www.microquill.com notes003= Portability flags notes009= Peak tuning flags notes010= same as baseline (basepeak=yes set globally)