#####################################################################
# SUT/Experimenter Section
# If it affects performance, you need to describe it, either
# in the pre-defined fields or by adding free text in the
# NOTES section.
# System Description - edit as needed
hw_avail = Oct-1996
hw_model = AlphaStation 500/500
machine_name = AlphaStation 500/500
hw_memory = 512MB
hw_disk = 3x4GB
hw_other = Ethernet
hw_vendor = Compaq Computer Corporation
company_name = Compaq Computer Corporation
# CPU description - edit as needed
# Note ncpu = number enabled; ncpuorder = valid numbers of CPUs
# to order for this model
hw_cpu = Alpha 21164
hw_cpu_mhz = 500
hw_fpu = Integrated
hw_ncpu = 1
hw_ncpuorder = 1
hw_parallel = No
hw_pcache = 8KB(I)+8KB(D) on chip
hw_scache = 96KB on chip
hw_tcache = 8MB off chip
hw_ocache = None
# Tester description - edit the date, put your name here!
test_date = Nov-1999
license_num = 2
prepared_by = Compaq NH
tester_name = John Henning
# Operating system, file system - edit at least the OS version
sw_os = Tru64 UNIX V4.0F
sw_file = ufs
sw_state = Multi-user
# Special notes
# If you have notes to add, put them here, starting with number
# 900. For example, you could remove the comment marks below if
# you were using the referenced patch kit.
#
#sw_os2 = UNIX V4.0F Patch Kit 1
#notes900 =
#notes901 = Information on UNIX V4.0F Patch Kit 1 is available at
#notes902 = http://ftp1.service.digital.com/public/unix/v4.0f/
# OS Date
# Use the next line only if the OS you are testing ships later
# than the compilers (and then comment out their availability dates,
# below!) Notice that the field "sw_avail" occurs 3 times in this
# file, but only one should be used on a given run:
#
# 1. the OS date (if later than the compilers), or
# 2. the Integer compiler date (later of C, C++), or
# 3. the FP compiler date (latest of C, Fortran, KAP C, KAP Fortran)
# sw_avail =
# With luck, you shouldn't have to edit below this point
# (unless you are installing new compilers or re-tuning)
# End of SUT/Experimenter section
######################################################################
######################################################################
# The special "un-named" section of the config file. Must appear
# before any instances of "default="
ext = nov11c
output_format = asc
teeout = no
teerunout = yes
tune = base
######################################################################
# Compiler selection - See "OS Date" above! Remember, it's the
# LAST compiler in a set whose date should be listed. Remember that
# C is used on both suites. Remember KAP dates.
default=default=default=default:
sw_compiler = Compaq C X6.2-259-449AT
CC = cc -v
int=default=default=default:
sw_avail = Feb-2000
sw_compiler2 = Compaq C++ V6.2-033-4298H
CXX = cxx -v
fp=default=default=default:
sw_avail = Feb-2000
sw_compiler2 = Compaq Fortran T5.3 (ft2)
sw_compiler3 = KAP Fortran V4.2
FC = kf90 -v
#######################################################################
# Integer Baseline Optimization
# Use notes0xx for for baseline
int=base=default=default:
notes000 = Baseline C : ONESTEP cc -arch ev56 -fast GEMFB
notes001 = C++: ONESTEP cxx -arch ev56 -O2
notes002 =
notes003 = GEMFB: fdo_pre0 = mkdir /tmp/pb; rm -f /tmp/pb/${baseexe}*
notes004 = PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pb
notes005 = PASS2_CFLAGS = -prof_use_feedback -prof_dir /tmp/pb
notes006 =
OPTIMIZE = -arch ev56
COPTIMIZE = -fast
CXXOPTIMIZE = -O2
ONESTEP = yes
fdo_pre0 = mkdir /tmp/pb; rm -f /tmp/pb/${baseexe}*
PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pb
PASS2_CFLAGS = -prof_use_feedback -prof_dir /tmp/pb
252.eon=base=default=default:
# Turn feedback off for eon
fdo_pre0 =
#######################################################################
# Floating point Baseline Optimization
# Use notes0xx for for baseline
fp=base=default=default:
notes000 = Baseline C: ONESTEP cc -arch ev56 -fast -O4
notes001 = Fortran: ONESTEP kf90 -arch ev56 -O5 -fkapargs='-ur=-1'
notes002 =
OPTIMIZE = -arch ev56
COPTIMIZE = -fast -O4
FOPTIMIZE = -O5 -fkapargs='-ur=1'
ONESTEP = yes
#######################################################################
# Integer Portability
# Use notes8xx for portability
int=default=default=default:
notes800 =
notes801 = Portability: gcc: -Dalloca=__builtin_alloca; crafty: -DALPHA
notes802 = perlbmk: -DSPEC_CPU2000_DUNIX; vortex: -DSPEC_CPU2000_LP64
notes803 = gap: -DSYS_HAS_CALLOC_PROTO -DSYS_IS_BSD -DSYS_HAS_IOCTL_PROTO -DSPEC_CPU2000_LP64
176.gcc=default=default=default:
EXTRA_CFLAGS= -Dalloca=__builtin_alloca
186.crafty=default=default=default:
EXTRA_CFLAGS = -DALPHA
253.perlbmk=default=default=default:
EXTRA_CFLAGS = -DSPEC_CPU2000_DUNIX
254.gap=default=default=default:
EXTRA_CFLAGS = -DSYS_HAS_CALLOC_PROTO -DSYS_IS_BSD -DSYS_HAS_IOCTL_PROTO -DSPEC_CPU2000_LP64
255.vortex=default=default=default:
EXTRA_CFLAGS = -DSPEC_CPU2000_LP64
#######################################################################
# Floating point Portability
# Use notes8xx for portability
fp=default=default=default:
notes800 =
notes801 = Portability: galgel: -fixed
178.galgel=default=default=default:
EXTRA_FFLAGS = -fixed
# ---------------------------------------------------------------------------
# hostname: leavme.zko.dec.com
# KAP Fortran 77 version: 4.1 k310440 980926
# KAP Fortran 90 version: 4.2 k3105107 990825
# KAP C version: 4.0 k010716 990831
# Fortran-77 version (including GEM): Compaq Fortran T5.3-893-4499U
# Fortran-90 version (including GEM): Compaq Fortran T5.3-893-4499U
# cc compiler version: DEC C V5.9-005
# GEM version for cc: 4091Q
# cc.alt compiler version: DEC C V6.1-005 (cc.alt)
# GEM version for cc.alt: 4291M
# *new* dtk compiler version: Compaq C X6.2-259
# GEM version for dtk: 449AT
# driver version for dtk: Compaq C V6.1-110 (dtk) cc Driver
# cc/om version: 2.0 January 1 1995
# cc.alt/om version: V4.OF cc.alt 27-Jan-1999
# cc.dtk/om version: V4.OF cc.alt 27-Jan-1999
# cxx compiler version: Compaq C++ V6.2-033
# GEM version for cxx: 4298H
# ---------------------------------------------------------------------------