# Invocation command line: # /home/ACCEL1.3/bin/runspec --reportable --config=CL_NV_V100_Cuda10.1_AMD_ROME_1S_20200504.cfg --flagsurl=pgi2014_CL_flags_20190716.xml --flagsurl=Lenovo-SPECACCEL1.2_AMD_Platform_Flags_20190716.xml --tune=base opencl # output_root was not used for this run ############################################################################ # Invocation command line: # /local/home/SPECACCEL/bin/runspec -c tesla-pgi142 --reportable -T base,peak -i test,train,ref opencl openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### strict_rundir_verify = 0 license_num = 28 tester = Lenovo Global Technology test_sponsor = Lenovo Global Technology ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes tune = base #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Aug-2017 hw_cpu_name = AMD EPYC 7742 hw_cpu_mhz = 2250 hw_cpu_max_mhz = 3400 hw_fpu = Integrated hw_nchips = 1 hw_ncores = 64 hw_ncoresperchip = 64 hw_nthreadspercore = 2 hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 256 MB I+D on chip per chip hw_ocache = None hw_vendor = Lenovo Global Technology hw_model = SR655 sw_parallel_other = None #hw_temperature_10201011948889_vendor = Digi #hw_temperature_10201011948889_setup = Position 5mm above intake fan #hw_temperature_10201011948889_serial = WS34682143 #hw_temperature_10201011948889_connection = USB #hw_power_10201011948888_vendor = Xitron Technologies, Inc. #hw_power_10201011948888_serial = 28011109005 #hw_power_10201011948888_met_inst = NIST #hw_power_10201011948888_connection = RS232 via USB-adapter #hw_power_10201011948888_cal_org = Micro Precision Calibration, Inc. #hw_power_10201011948888_cal_label = 220081222038459 #hw_power_10201011948888_cal_date = 02.20.2014 #hw_temperature_10201011948889_model = DigiWATCHPORT_H #hw_temperature_10201011948889_label = Temperature Meter #hw_power_10201011948888_model = 2801 #hw_power_10201011948888_label = Power Analyzer hw_disk = 1 x 480 GB hw_memory000 = 256 GB (8 x 32 GB 2Rx8 PC4-3200AA-R) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Tesla V100 hw_accel_vendor = NVIDIA Corporation hw_accel_name = NVIDIA Tesla V100-PCIE-16GB hw_accel_type = GPU hw_accel_connect = PCIe 3.0 16x hw_accel_ecc = Yes hw_accel_desc = NVIDIA Tesla V100-PCIE-16GB #################################################################### # Power and temperature meter configuration #################################################################### #power = yes #power_analyzer = 10.20.101.194:8888 #temp_meter = 10.20.101.194:8889 #mean_anyway = 1 #voltage_range = auto #idle_current_range = auto #current_range = auto #################################################################### # Software information #################################################################### default=default=default=default: sw_avail = Aug-2019 sw_compiler = PGI Accelerator Server Complete, Release 19.5 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 418.39 CC = pgcc CXX = pgc++ FC = pgfortran #CC = pgcc-llvm #CXX = pgc++llvm #FC = pgfortran-llvm #openacc=default=default=default: sw_other = None #opencl=default=default=default: sw_other = CUDA 10.1 SDK hw_psu = 750 W #hw_psu_info = Thermaltake SMART M1200W #openacc=base=default=default: #OPTIMIZE = -fast -Mfprelaxed #FOPTIMIZE = -acc -ta=tesla:cc70,cuda9.2 #COPTIMIZE = -acc -ta=tesla:cc70,cuda9.2 #openacc=peak=default=default: #OPTIMIZE = -fast -Mfprelaxed #FOPTIMIZE = -acc -ta=tesla:cc70,cuda9.2 #COPTIMIZE = -acc -ta=tesla:cc70,cuda9.2 #opencl=default=default=default: #COPTIMIZE = -fast -Mfprelaxed #CPORTABILITY = -I/opt/cuda-5.5/include/ -lOpenCL #CPORTABILITY = -I/usr/local/cuda-9.2/targets/x86_64-linux/include/ -L/usr/local/cuda-9.2/targets/x86_64-linux/lib -lOpenCL #CPORTABILITY = -I/usr/local/cuda-9.2/targets/x86_64-linux/include/ -L/usr/local/cuda-9.2/lib64 -lOpenCL #CXXPORTABILITY = -I/usr/local/cuda/targets/x86_64-linux/include/ -L/usr/local/cuda/targets/x86_64-linux/lib -lOpenCL #CXXPORTABILITY = -I/opt/cuda-5.5/include/ -lOpenCL #CXXOPTIMIZE = -fast -Mfprelaxed #CXXPORTABILITY = -I/usr/local/cuda-9.2/targets/x86_64-linux/include/ -L/usr/local/cuda-9.2/targets/x86_64-linux/lib -lOpenCL #CXXPORTABILITY = -I/usr/local/cuda-9.2/targets/x86_64-linux/include/ -L/usr/local/cuda-9.2/lib64 -lOpenCL #CXXPORTABILITY = -I/usr/local/cuda/targets/x86_64-linux/include/ -L/usr/local/cuda/targets/x86_64-linux/lib -lOpenCL OPTIMIZE = -fast -Mfprelaxed LIBS = -L/usr/local/cuda-10.1/lib64 -lOpenCL EXTRA_LIBS = EXTRA_CXXFLAGS = -I/usr/local/cuda-10.1/targets/x86_64-linux/include EXTRA_CFLAGS = -I/usr/local/cuda-10.1/targets/x86_64-linux/include 118.cutcp=default=default=default: CPORTABILITY += -D__GNUC__ 116.histo=default=default=default: CPORTABILITY += -DSPEC_LOCAL_MEMORY_HEADROOM=1 122.cfd=default=default=default: src.alt = exitstatus submit = numactl -C 16-18 -m 0 $command #submit = numactl -C 16-18 -m 0 $command #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_2_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=288 #LIBS = -L$(SPEC)/fftw333/lib -lfftw3 #LIBS = -L/usr/local/lib -lfftw3 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit opencl=peak=default=default: OPTIMIZE = -fast -Mfprelaxed 101.tpacf=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=1024 103.stencil=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=0 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_1=0 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_2=0 104.lbm=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_1=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_2=1 110.fft=peak=default=default: basepeak = yes 112.spmv=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=96 114.mriq=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=256 116.histo=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=512 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=512 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_1=1 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_2_0=1024 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=512 117.bfs=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=64 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=64 118.cutcp=peak=default=default: basepeak = yes 120.kmeans=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=288 121.lavamd=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=128 122.cfd=peak=default=default: #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_2_0=192 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=288 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_4_0=192 123.nw=peak=default=default: basepeak=yes 124.hotspot=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=16 125.lud=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 126.ge=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=512 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_1=512 127.srad=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 128.heartwall=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 140.bplustree=peak=default=default: basepeak = yes # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /home/ACCEL1.3/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on linux-x8nq Tue May 5 15:55:21 2020 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7H12 64-Core Processor notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 64 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 notes_plat_sysinfo_090 = 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 notes_plat_sysinfo_095 = 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 notes_plat_sysinfo_100 = cache size : 512 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263982560 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="SLES" notes_plat_sysinfo_150 = VERSION="15-SP1" notes_plat_sysinfo_155 = VERSION_ID="15.1" notes_plat_sysinfo_160 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" notes_plat_sysinfo_165 = ID="sles" notes_plat_sysinfo_170 = ID_LIKE="suse" notes_plat_sysinfo_175 = ANSI_COLOR="0;32" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:suse:sles:15:sp1" notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = uname -a: notes_plat_sysinfo_195 = Linux linux-x8nq 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 notes_plat_sysinfo_200 = (8fba516) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = run-level 3 May 5 15:43 notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = SPEC is set to: /home/ACCEL1.3 notes_plat_sysinfo_225 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_230 = /dev/sda4 btrfs 444G 156G 287G 36% /home notes_plat_sysinfo_235 = Additional information from dmidecode: notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_250 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_255 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_260 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = BIOS Lenovo D8E105F-1.00 03/19/2020 notes_plat_sysinfo_275 = Memory: notes_plat_sysinfo_280 = 8x Samsung M393A4G43AB3-CWE 32 kB 2 rank 3200 MT/s notes_plat_sysinfo_285 = 8x Unknown Unknown notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7H12 64-Core hw_disk = 444 GB add more disk info here hw_memory001 = 251.753 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 1 prepared_by = root (is never output, only tags rawfile) sw_file = btrfs sw_os000 = NAME="SLES" sw_os001 = 4.12.14-195-default sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = pgi2014_CL_flags_20190716.xml # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /home/ACCEL1.3/sub/pgi_flags.xml hw_cpu_name = AMD EPYC 7H12 hw_cpu_char = Turbo up to 3.3 GHz hw_cpu_mhz = 2600 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1-2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 256 MB I+D on chip per chip hw_ocache = None hw_memory = 256 GB (8 x 32 GB 2Rx8 PC4-3200AA-R) hw_disk = 1x 480 GB 2.5" SSD hw_other = None hw_accel_model = Tesla V100S hw_accel_vendor = NVIDIA Corporation hw_accel_name = NVIDIA Tesla V100S-PCIE-32GB hw_accel_type = GPU hw_accel_connect = PCIe 3.0 16x hw_accel_ecc = Yes hw_accel_desc = NVIDIA Tesla V100S-PCIE-32GB sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 418.87 sw_compiler = PGI Professional Edition Release 19.10 sw_file = btrfs sw_state = Run level 3 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = CUDA 10.1 SDK test_sponsor = Lenovo Global Technology license_num = 28 tester = Lenovo Global Technology hw_avail = Jun-2020 sw_avail = Jun-2020 prepared_by = root hw_vendor = Lenovo Global Technology hw_model = ThinkSystem SR665 hw_nthreadspercore = 2 hw_ncoresperchip = 64 hw_ncores = 64 hw_nchips = 1 sw_os000 = SUSE Linux Enterprise Server 15 SP1 sw_os001 = 4.12.14-195-default notes_plat_sysinfo_000 = Sysinfo program /home/ACCEL1.3/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on linux-x8nq Tue May 5 15:55:21 2020 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7H12 64-Core Processor notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 64 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 notes_plat_sysinfo_090 = 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 notes_plat_sysinfo_095 = 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 notes_plat_sysinfo_100 = cache size : 512 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263982560 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="SLES" notes_plat_sysinfo_150 = VERSION="15-SP1" notes_plat_sysinfo_155 = VERSION_ID="15.1" notes_plat_sysinfo_160 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" notes_plat_sysinfo_165 = ID="sles" notes_plat_sysinfo_170 = ID_LIKE="suse" notes_plat_sysinfo_175 = ANSI_COLOR="0;32" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:suse:sles:15:sp1" notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = uname -a: notes_plat_sysinfo_195 = Linux linux-x8nq 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 notes_plat_sysinfo_200 = (8fba516) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = run-level 3 May 5 15:43 notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = SPEC is set to: /home/ACCEL1.3 notes_plat_sysinfo_225 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_230 = /dev/sda4 btrfs 444G 156G 287G 36% /home notes_plat_sysinfo_235 = Additional information from dmidecode: notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_250 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_255 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_260 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = BIOS Lenovo D8E105F-1.00 03/19/2020 notes_plat_sysinfo_275 = Memory: notes_plat_sysinfo_280 = 8x Samsung M393A4G43AB3-CWE 32 kB 2 rank 3200 MT/s notes_plat_sysinfo_285 = 8x Unknown Unknown notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/PGI_flags.xml hw_cpu_name = AMD EPYC 7H12 hw_cpu_char = Turbo up to 3.3 GHz hw_cpu_mhz = 2600 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1-2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 256 MB I+D on chip per chip hw_ocache = None hw_memory = 256 GB (8 x 32 GB 2Rx8 PC4-3200AA-R) hw_disk = 1x 480 GB 2.5" SSD hw_other = None hw_accel_model = Tesla V100S hw_accel_vendor = NVIDIA Corporation hw_accel_name = NVIDIA Tesla V100S-PCIE-32GB hw_accel_type = GPU hw_accel_connect = PCIe 3.0 16x hw_accel_ecc = Yes hw_accel_desc = NVIDIA Tesla V100S-PCIE-32GB sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 418.87 sw_compiler = PGI Professional Edition Release 19.10 sw_file = btrfs sw_state = Run level 3 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = CUDA 10.1 SDK test_sponsor = Lenovo Global Technology license_num = 28 tester = Lenovo Global Technology hw_avail = Jun-2020 sw_avail = Jun-2020 prepared_by = root hw_vendor = Lenovo Global Technology hw_model = ThinkSystem SR665 hw_nthreadspercore = 2 hw_ncoresperchip = 64 hw_ncores = 64 hw_nchips = 1 sw_os000 = SUSE Linux Enterprise Server 15 SP1 sw_os001 = 4.12.14-195-default notes_plat_sysinfo_000 = Sysinfo program /home/ACCEL1.3/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on linux-x8nq Tue May 5 15:55:21 2020 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7H12 64-Core Processor notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 64 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 notes_plat_sysinfo_090 = 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 notes_plat_sysinfo_095 = 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 notes_plat_sysinfo_100 = cache size : 512 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263982560 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="SLES" notes_plat_sysinfo_150 = VERSION="15-SP1" notes_plat_sysinfo_155 = VERSION_ID="15.1" notes_plat_sysinfo_160 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" notes_plat_sysinfo_165 = ID="sles" notes_plat_sysinfo_170 = ID_LIKE="suse" notes_plat_sysinfo_175 = ANSI_COLOR="0;32" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:suse:sles:15:sp1" notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = uname -a: notes_plat_sysinfo_195 = Linux linux-x8nq 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 notes_plat_sysinfo_200 = (8fba516) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = run-level 3 May 5 15:43 notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = SPEC is set to: /home/ACCEL1.3 notes_plat_sysinfo_225 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_230 = /dev/sda4 btrfs 444G 156G 287G 36% /home notes_plat_sysinfo_235 = Additional information from dmidecode: notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_250 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_255 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_260 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = BIOS Lenovo D8E105F-1.00 03/19/2020 notes_plat_sysinfo_275 = Memory: notes_plat_sysinfo_280 = 8x Samsung M393A4G43AB3-CWE 32 kB 2 rank 3200 MT/s notes_plat_sysinfo_285 = 8x Unknown Unknown notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program)