# Invocation command line: # /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/bin/runspec --config chester-accel-acc-pgi --reportable --action run openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### license_num = 3440A prepared_by = Veronica G. Vergara Larrea tester = Oak Ridge National Laboratory test_sponsor = Oak Ridge National Laboratory ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes #tune = base,peak tune = base #strict_rundir_verify = 0 verbose = 10 #output_root = /tmp/scratch/vgv/spec use_submit_for_speed = 1 submit = aprun -q -n 1 $command #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_vendor = Cray hw_avail = Apr-2013 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_disk = Two 500 GB 7200 RPM 2.5" SAS hard drives, in RAID 1 mirror hw_fpu = Integrated hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_model = Cray XK7 hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 16 hw_nthreadspercore = 1 hw_ncpuorder = 1 chip hw_other = None hw_ocache = None hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores #################################################################### # Accelerator Hardware information #################################################################### hw_accel_connect = PCIe 2.0 16x hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM hw_accel_ecc = yes hw_accel_model = Tesla K20 hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_vendor = NVIDIA sw_accel_driver = 352.101 #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 10.20.101.194:8888 temp_meter = 10.20.101.194:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto #################################################################### # Software information #################################################################### default=default=default=default: sw_file = NFSv3 (IBM N5500 NAS) over Gb ethernet sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = Linux Environment 4.1 sw_os001 = Kernel 2.6.32.59-0.7.1_1.0401.6845-cray_gem_c sw_other = NVIDIA CUDA 7.5.18 sw_state = Multi-user, run level 3 sw_base_ptrsize = 64-bit sw_avail = Mar-2017 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 CC = cc CXX = CC FC = ftn openacc=default=default=default: sw_other = CUDA 7.5 SDK, FFTW 3.3.4 openacc=base=default=default: OPTIMIZE = -fast -Mfprelaxed -acc -ta=tesla:cc35,cuda7.5 #350.md=peak=default=default: #FOPTIMIZE = -acc -ta=tesla,maxregcount:48 # #351.palm=peak=default=default: #PORTABILITY = -DSPEC_HOST_FFTW3 #FOPTIMIZE = -acc=noautopar -ta=tesla,fastmath -I/opt/cray/fftw/3.3.4.8/interlagos/include #LIBS = -L/opt/cray/fftw/3.3.4.8/interlagos/lib -lfftw3 # #352.ep=peak=default=default: #FOPTIMIZE = -acc -ta=tesla,llvm # #359.miniGhost=peak=default=default: #FOPTIMIZE = -acc -ta=tesla,cuda7.5,maxregcount:32 #COPTIMIZE = -acc -ta=tesla,cuda7.5,maxregcount:32 359.miniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain #363.swim=peak=default=default: #FOPTIMIZE = -acc -ta=tesla,pin # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_disk = 14P add more disk info here hw_memory001 = 15.768 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 1 prepared_by = vgv (is never output, only tags rawfile) sw_file = lustre sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P add more disk info here hw_other = None hw_accel_model = Tesla K20 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_file = lustre sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = CUDA 7.5 SDK, FFTW 3.3.4 hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 3440A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_memory001 = 15.768 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /ccs/home/vgv/projects/specHPG/results/openacc/kit75/summitdev/pgi17.4/pgi2017_flags.xml hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P add more disk info here hw_other = None hw_accel_model = Tesla K20 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_file = lustre sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = CUDA 7.5 SDK, FFTW 3.3.4 hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 3440A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_memory001 = 15.768 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /ccs/home/vgv/projects/specHPG/results/openacc/kit75/summitdev/pgi17.4/pgi2017_flags.xml hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P add more disk info here hw_other = None hw_accel_model = Tesla K20 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_file = lustre sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = CUDA 7.5 SDK, FFTW 3.3.4 hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 3440A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_memory001 = 16146 MB hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /ccs/home/vgv/projects/specHPG/flags/chester_pgi2017_flags.xml hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P add more disk info here hw_other = None hw_accel_model = Tesla K20 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_file = lustre sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = CUDA 7.5 SDK, FFTW 3.3.4 hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 3440A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_memory001 = 16146 MB hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /ccs/home/vgv/projects/specHPG/flags/chester_pgi2017_flags.xml hw_cpu_name = 6-Core AMD Opteron 23 (D0) hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P add more disk info here hw_other = None hw_accel_model = Tesla K20 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Accelerator Server Complete, Release 17.3 sw_file = lustre sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = CUDA 7.5 SDK, FFTW 3.3.4 hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 3440A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_memory001 = 16146 MB hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.46.1_1.0502.8871-cray_gem_s notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on chester-login2 Tue May 16 09:30:52 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : 6-Core AMD Opteron(tm) Processor 23 (D0) notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 6 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 6 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = cache size : 512 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 16534464 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 3 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux chester-login2 3.0.101-0.46.1_1.0502.8871-cray_gem_s #1 SMP Sat Oct 22 notes_plat_sysinfo_185 = 15:27:07 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 May 12 11:51 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 10.36.226.77@o2ib:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/pgi2017_flags.20170621.00.xml hw_cpu_name = AMD Opteron 6274 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 64 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None hw_disk = 14P Lustre parallel file system hw_other = N/A hw_accel_model = Tesla K20X hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20X hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 352.101 sw_compiler = PGI Premier Edition, Release 17.3 sw_file = lustre sw_state = Run level 3 (multi-user, non-graphical) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = NVIDIA Tesla K20X GPU, 2688 CUDA cores, 732MHz, 6 hw_accel_desc001 = GB GDDR5 RAM test_sponsor = Oak Ridge National Laboratory license_num = 054A tester = Oak Ridge National Laboratory hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = vgv (is never output, only tags rawfile) hw_vendor = Cray hw_model = Cray XK7 system hw_nthreadspercore = 1 hw_ncoresperchip = 16 hw_ncores = 16 hw_nchips = 1 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.101-0.46.1_1.0502.8871-cray_gem_c notes_plat_sysinfo_000 =Sysinfo program /var//opt/cray/alps/spool/14533706/sysinfo notes_plat_sysinfo_005 =$Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 =running on nid03790 Mon Jun 5 16:59:06 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 =This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 =some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 =From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD Opteron(TM) Processor 6274 notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = cache size : 2048 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 =From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 33083764 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 =/usr/bin/lsb_release -d notes_plat_sysinfo_130 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_135 = notes_plat_sysinfo_140 =From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = SuSE-release: notes_plat_sysinfo_150 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_155 = VERSION = 11 notes_plat_sysinfo_160 = PATCHLEVEL = 3 notes_plat_sysinfo_165 = notes_plat_sysinfo_170 =uname -a: notes_plat_sysinfo_175 = Linux nid03790 3.0.101-0.46.1_1.0502.8871-cray_gem_c #1 SMP Sat Oct 22 notes_plat_sysinfo_180 = 15:26:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = notes_plat_sysinfo_195 =SPEC is set to: /lustre/atlas2/stf006/scratch/vgv/spec/accel/kit75chester notes_plat_sysinfo_200 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_205 = 10.36.226.77@o2ib200:/atlas2 lustre 14P 7.4P 5.8P 56% /lustre/atlas2 notes_plat_sysinfo_210 = notes_plat_sysinfo_215 =Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_220 = notes_plat_sysinfo_225 =(End of data from sysinfo program) notes_000 =Hardware no longer GA. Result shown for historical purposes.