# Invocation command line: # /home/s1428123/spec-accel/bin/runspec --config=/home/s1428123/spec-accel/config/Taurus-opencl-nvidia.cfg --platform NVIDIA --device GPU --tune=base --reportable opencl # output_root was not used for this run ############################################################################ # # Document Title: Taurus-opencl-nvidia.cfg # # Subject: SPEC ACCEL TU Dresden ZIH Taurus Phase 1 configuration file # # Last Update: 01 Aug 2015 # # ------------------------------------------------------------- # # This is an example of a very simple ACCEL config file. # It is intended to cover the features sufficient to # get a ACCEL baseline run completed. Please see the # config.txt file for details on config file setup and # use and other example configuration files for further sample # implementations. # # IMPORTANT: This is an example configuration file for illustration # purposes. # # # Comments to the config file are found in lines that begin # with the "#" character. # # The first step in creating a configuration file is to document # your configuration. The example below contains an example of # some of the fields that are needed for documenting your # measurements. See example-medium.cfg for an example that # includes a list of all of the fields required for a full # publication of results. ##################################################################### # System Under Test (SUT) Section # If it affects performance, you need to describe it, either # in the pre-defined fields or by adding it to the notes section. # Replace the setting below with the ones that match your # machine. # # hw_model = name of the machine model # hw_memory = how much memory in the machine you are testing # hw_disk = what types and size of disk were used when tested # hw_vendor = what vendor makes the machine being tested # hw_cpu = what type of processor is in the system # hw_cpu_mhz = the clock frequency of the processor ####################################################################### # System Description hw_model = Bull B515 hw_nthreadspercore = 1 hw_memory000 = 48 GB (6 x 8 GB 2Rx4 PC3-12800R-11, ECC) hw_disk = hw_vendor = Bull # CPU description hw_cpu_mhz = 2100 hw_cpu_max_mhz = 2900 hw_nchips = 2 hw_ncores = 16 hw_ncoresperchip = 8 hw_ncpuorder = 1,2 chips hw_fpu = Integrated hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None # Accelerator description hw_accel_model = Tesla K20X hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20X hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes hw_accel_desc000= NVIDIA Tesla K20X, 2688 CUDA cores, 732 MHz hw_accel_desc001 = 6 GB GDDR5 RAM hw_accel_desc002 = (Kepler Generation) sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 346.46 # Tester description - edit the date, put your license number here! license_num =37A prepared_by = display_order = 1a # Operating system, file system sw_os000 = bullx Linux Server release 6.3 (V1) sw_file = Default ####################################################################### # End of SUT section # If this config file were to be applied to several SUTs, edits would # be needed only ABOVE this point. ###################################################################### ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # the rest are default values ext = compsys output_format = asc #table = 0 teeout = no teerunout = yes tune = base ###################################################################### # Compiler selection, versions, and dates. # # sw_compiler = additional information describing the compiler # CC = how the C Compiler is invoked # FC = how the FORTRAN compiler is invoked default=default=default=default: sw_compiler = GNU Compiler C/C++ Version 4.9.1 CC = gcc CXX = g++ FC = gfortran strict_rundir_verify = 0 ####################################################################### # # notes8xx are used for listing the portability flags that are needed # to get some of the programs to compile. While SPEC has made efforts # to ensure that programs do not require these types of flags, some # of the programs are advanced enough and the differences between # operating systems great enough that some programs require these. # # For portability flags for benchmarks not listed, duplicate the format # used below. Each benchmark is assigned its own "area" and its own # setting for EXTRA_CFLAGS # # EXTRA_CFLAGS = Additional flags to use for compilation; typically # used for portability flags # EXTRA_LIBS = Additional libraries used for compilation; typically # used for issues of portability # EXTRA_FFLAGS = Additional flags to use for compilation; typically # used for portability flags ####################################################################### # # OPTIMIZE = flags applicable to all compilers # COPTIMIZE = flags applicable to the C compiler # FOPTIMIZE = flags applicable to the Fortran compiler # # See your compiler manual for information on the flags available # for your compiler # OPTIMIZE = -O2 #LIBS = -L/usr/local/cuda/lib64 -lOpenCL LIBS = -L/sw/taurus/libraries/cuda/7.0.28/lib64 -lOpenCL EXTRA_LIBS = #EXTRA_CXXFLAGS = -I/usr/local/cuda/include EXTRA_CXXFLAGS = -I/sw/taurus/libraries/cuda/7.0.28/include EXTRA_CFLAGS = -I/sw/taurus/libraries/cuda/7.0.28/include #EXTRA_CFLAGS = -I/usr/local/cuda/include ####################################################################### # End of user-supplied information. ####################################################################### # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /home/s1428123/spec-accel/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on taurusi2001 Tue Sep 8 11:03:54 2015 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2450 0 @ 2.10GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 8 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 49396228 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = bull-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_155 = redhat-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_160 = system-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_165 = system-release-cpe: cpe:/o:bullx:linux:6server:ga:server notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux taurusi2001 2.6.32-279.5.2.bl6.Bull.35_restricted.x86_64 #1 SMP Wed Apr notes_plat_sysinfo_185 = 24 14:29:54 CEST 2013 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 Aug 13 17:30 notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /home/s1428123/spec-accel notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 172.26.75.132:/hrsk_userhome notes_plat_sysinfo_220 = nfs 29T 24T 5.3T 82% /home notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2450 hw_disk = 29 TB NetApp FAS6280 hw_nchips = 2 prepared_by = s1428123 (is never output, only tags rawfile) sw_file = nfs sw_os001 = 2.6.32-279.5.2.bl6.Bull.35_restricted.x86_64 sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable sw_other = NVIDIA Cuda SDK 7.0, driver version 346.46 test_sponsor = Technische Universitaet Dresden tester = Technische Universitaet Dresden hw_avail = Jul-2013 sw_avail = Mar-2015 flagsurl000 = /home/s1428123/run-spec-accel/flags-advanced_edited.xml hw_cpu_char000 = Intel Turbo Boost Technology up tp 2.90 GHz hw_cpu_char001 = AVX clock: 2100 MHz # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/accel/flags/flags-advanced.20150930.xml hw_cpu_name = Intel Xeon E5-2450 hw_cpu_char = Intel Turbo Boost Technology up to 2.90 GHz hw_cpu_mhz = 2100 hw_cpu_max_mhz = 2900 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_disk = 29 TB NetApp FAS6280 hw_accel_model = Tesla K20X hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20X hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 346.46 sw_compiler = GNU Compiler C/C++ Version 4.9.1 sw_file = nfs sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA Cuda SDK 7.0, driver version 346.46 hw_accel_desc000 = NVIDIA Tesla K20X, 2688 CUDA cores, 732 MHz hw_accel_desc001 = 6 GB GDDR5 RAM hw_accel_desc002 = (Kepler Generation) test_sponsor = Technische Universitaet Dresden license_num = 37A tester = Technische Universitaet Dresden hw_avail = Jul-2013 sw_avail = Mar-2015 prepared_by = s1428123 (is never output, only tags rawfile) hw_vendor = Bull hw_model = Bull B515 hw_nthreadspercore = 1 hw_ncoresperchip = 8 hw_ncores = 16 hw_nchips = 2 hw_memory000 = 48 GB (6 x 8 GB 2Rx4 PC3-12800R-11, ECC) sw_os000 = bullx Linux Server release 6.3 (V1) sw_os001 = 2.6.32-279.5.2.bl6.Bull.35_restricted.x86_64 notes_plat_000 =MultiThreading disabled in BIOS notes_plat_sysinfo_000 = Sysinfo program /home/s1428123/spec-accel/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on taurusi2001 Tue Sep 8 11:03:54 2015 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2450 0 @ 2.10GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 8 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 49396228 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = bull-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_155 = redhat-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_160 = system-release: bullx Linux Server release 6.3 (V1) notes_plat_sysinfo_165 = system-release-cpe: cpe:/o:bullx:linux:6server:ga:server notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux taurusi2001 2.6.32-279.5.2.bl6.Bull.35_restricted.x86_64 #1 SMP Wed Apr notes_plat_sysinfo_185 = 24 14:29:54 CEST 2013 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 Aug 13 17:30 notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /home/s1428123/spec-accel notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = 172.26.75.132:/hrsk_userhome notes_plat_sysinfo_220 = nfs 29T 24T 5.3T 82% /home notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = (End of data from sysinfo program)