SPECpower_ssj2008 Copyright (C) 2007-2018 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL385 Gen10 SPECpower_ssj2008 = 11,140 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Jul 3, 2018 Publication: Jul 18, 2018 Hardware Availability: May-2018 Software Availability: Feb-2018 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 4,283,406 | 295 | 14,538 90% | 89.8% | 3,852,369 | 269 | 14,347 80% | 80.0% | 3,430,523 | 246 | 13,963 70% | 69.9% | 2,996,010 | 218 | 13,726 60% | 60.0% | 2,572,667 | 199 | 12,948 50% | 49.9% | 2,139,917 | 184 | 11,614 40% | 40.2% | 1,722,706 | 172 | 9,991 30% | 30.0% | 1,287,876 | 160 | 8,041 20% | 19.9% | 854,414 | 148 | 5,784 10% | 10.0% | 427,894 | 137 | 3,124 Active Idle | 0 | 88.3 | 0 sum of ssj_ops / sum of power = | 11,140 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL385 Gen10 Form Factor: 2U CPU Name: AMD EPYC 7601 2.20 GHz CPU Characteristics: 32-Core, 2.20GHz 64MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 64 cores, 2 chips, 32 cores/chip Hardware Threads: 128 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 512 KB I+D on chip per core Tertiary Cache: 64 MB I+D on chip per core Other Cache: None Memory Amount (GB): 128 # and size of DIMM: 16 x 8192 MB Memory Details: 8GB 1Rx8 PC4-2666V-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) Disk Drive: 1 x HPE 150GB SATA 6G M.2 2280 SSD (875317-B21) Disk Controller: embedded SATA # and type of Network Interface 1 x HPE Ethernet 1Gb 4-port 331i Adapter Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: 1 x HPE High Performance Fan kit (867810-B21) SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2012 R2 Datacenter OS Version: Version 6.3 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmx6656m -Xms6656m -Xmn4500m -XX:SurvivorRatio=15 -XX:InlineSmallCode=8000 -XX:FreqInlineSize=7000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=8 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=80 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 JVM Affinity: start /NODE[0,1,2,3,4,5,6,7] /AFFINITY [0xFF, 0xFF00] JVM Instances: 16 JVM Initial Heap (MB): 6656 JVM Maximum Heap (MB): 6656 JVM Address Bits: 64 Boot Firmware Version: A40 v1.20 (01/12/2018) Management Firmware Version: 1.30 May 31 2018 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE Service Pack for ProLiant (SPP) Version:2018.03.0 (Feb 28 2018); Microsoft Windows KB4054519 Boot Firmware Settings * AMD Core Performance Boost: Disabled * Memory Bus Frequency: 1600 Mhz * Memory Patrol Scrubbing: Disabled * L1 Stream HW Prefetcher: Disabled * L2 Stream HW Prefetcher: Disabled * Thermal Configuration: Optimal Cooling Management Firmware Settings See SUT Notes System Under Test Notes * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * SPECpower_ssj.props input.load_level.number_warehouses set to 128 due to a known inconsistency in processor reporting with this Java version. * Windows Power Scheme: Balanced * Processor power management: Minimum Processor State = 0% * System cooling policy = Active * PCI Express Power Management = Maximum Power Savings * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * Using Windows PowerShell, set the following powercfg properties: * powercfg -setacvalueindex scheme_current SUB_PROCESSOR CPMINCORES 100 * powercfg -setacvalueindex scheme_current SUB_PROCESSOR CPPERF 0 * powercfg -setacvalueindex scheme_current SUB_PROCESSOR DISTRIBUTEUTIL 0 * powercfg -setacvalueindex scheme_current SUB_PROCESSOR IDLECHECK 50000 * powercfg -setacvalueindex scheme_current SUB_PROCESSOR PERFINCTHRESHOLD 25 * powercfg -setacvalueindex scheme_current SUB_PROCESSOR PERFDECTHRESHOLD 10 * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * No: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * No: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_161-b12 (build 25.161-b12, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT310E Serial Number: C2QM22002V Connectivity: Yokogawa USB Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-D537U-20-1 Date of Calibration: 28-Jul-2017 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 295 | 21.9 90% | 269 | 22.0 80% | 246 | 22.2 70% | 218 | 21.8 60% | 199 | 21.6 50% | 184 | 21.5 40% | 172 | 21.6 30% | 160 | 21.8 20% | 148 | 21.9 10% | 137 | 21.9 Active Idle | 88.3 | 21.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 210V / 60 Hz / 1 phase / | 21.5 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20180703-00828-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 4,289,186 Calibration 2 | | | 4,287,946 Calibration 3 | | | 4,287,479 ssj_ops@calibrated=4,287,712 100% | 99.9% | 4,287,712 | 4,283,406 90% | 89.8% | 3,858,941 | 3,852,369 80% | 80.0% | 3,430,170 | 3,430,523 70% | 69.9% | 3,001,399 | 2,996,010 60% | 60.0% | 2,572,627 | 2,572,667 50% | 49.9% | 2,143,856 | 2,139,917 40% | 40.2% | 1,715,085 | 1,722,706 30% | 30.0% | 1,286,314 | 1,287,876 20% | 19.9% | 857,542 | 854,414 10% | 10.0% | 428,771 | 427,894 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20180703-00828.DL385-GEN10.txt) for additional details. Copyright (C) 2007-2018 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]