SPECpower_ssj2008 Copyright (C) 2007-2018 Standard Performance Evaluation Corporation Inspur Corporation Inspur Yingxin NF8480M5 SPECpower_ssj2008 = 12,198 overall ssj_ops/watt Test Sponsor: Inspur Corporation SPEC License #: 3358 Tested By: Inspur Corporation Test Location: JINAN, CHINA Test Date: Jun 5, 2018 Publication: Aug 1, 2018 Hardware Availability: May-2018 Software Availability: Jan-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 9,920,959 | 726 | 13,667 90% | 90.0% | 8,953,246 | 645 | 13,886 80% | 80.1% | 7,967,897 | 546 | 14,595 70% | 70.0% | 6,960,998 | 477 | 14,603 60% | 60.0% | 5,968,895 | 421 | 14,192 50% | 49.9% | 4,968,209 | 371 | 13,392 40% | 39.9% | 3,972,995 | 333 | 11,942 30% | 30.1% | 2,992,565 | 303 | 9,886 20% | 20.1% | 1,996,794 | 273 | 7,306 10% | 10.0% | 994,857 | 233 | 4,268 Active Idle | 0 | 158 | 0 sum of ssj_ops / sum of power = | 12,198 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node. HARDWARE Hardware Vendor: Inspur Corporation Model: Inspur Yingxin NF8480M5 Form Factor: 4U CPU Name: Intel Xeon Platinum 8176 CPU Characteristics: 28-Core, 2.1GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2100 CPU(s) Enabled: 112 cores, 4 chips, 28 cores/chip Hardware Threads: 224 (2 / core) CPU(s) Orderable: 1,2,3,4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per chip Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 384 # and size of DIMM: 24 x 16 GB Memory Details: 24 x 16GB 2Rx8 PC4-2666V ECC RDIMM;slots CPU0_C0D0,CPU0_C1D0, CPU0_C2D0, CPU0_C3D0, CPU0_C4D0, CPU0_C5D0, CPU1_C0D0,CPU1_C1D0, CPU1_C2D0, CPU1_C3D0, CPU1_C4D0, CPU1_C5D0,CPU2_C0D0,CPU2_C1D0, CPU2_C2D0, CPU2_C3D0, CPU2_C4D0, CPU2_C5D0, CPU3_C0D0,CPU3_C1D0, CPU3_C2D0, CPU3_C3D0, CPU3_C4D0, CPU3_C5D0 populated Power Supply Quantity and Rating None (W): Power Supply Details: GW-CRPS1200 PN:V07LW020V000300F Disk Drive: Intel SSD DC S3700 Series 200G PN:ZMHD1000019 Disk Controller: PCI-E Controller,RiserCard_Inspur_Santiago_PCIEx8_ forRaid, PN: YZRI-00900-101,Raid_L_8R0_9460-8i_2GB_HDM12G PCIE3.0 PN:ZMCA1000201 # and type of Network Interface 1 x Intel I350 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Balanced Power" power plan) Operating System (OS): Microsoft Windows Servers 2012 R2 Standard OS Version: Version 6.3.9600 Build 9600 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM)64-Bit Server VM(build 24.80-b11,mixed mode),version 1.7.0_80 JVM Command-line Options: -server -Xmn1300m -Xms1550m -Xmx1550m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /NODE [0,2,4,6] /AFFINITY [3,C,30,C0,C000,30000,C0000,30000000,C000000 0,300000000,C00000000,C0000000000,3000000000 00,C00000000000];start /NODE [1,3,5,7] /AFFINITY [3,C,30,3000,C000,30000,C0000,30000000,C0000 000,300000000,30000000000,C0000000000,300000 000000,C00000000000] JVM Instances: 112 JVM Initial Heap (MB): 1550 JVM Maximum Heap (MB): 1550 JVM Address Bits: 64 Boot Firmware Version: 3.0.5 Management Firmware Version: 1.15.7 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Prefetcher = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS * Set "Turbo mode = Disabled" in BIOS * Set "IMC (Integrated memory controller) Interleaving 1-way" in BIOS * Set "Sub NUMA Cluster (SNC) = Enable" in BIOS * Set "Energy Performance BIAS = Balanced Power" in BIOS Management Firmware Settings none System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Minimum Processor State:0%. * Maximum Processor State:100%. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Each JVM instance was affinitized to 2 logical processors * No: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented * No: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented * No: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented Controller System HARDWARE Hardware Vendor: Inspur Corporation Model: Inspur VIT P3400 CPU Description: Intel Core i5-4210m Memory amount (GB): 4 SOFTWARE Operating System (OS): Windows 7 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11,mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT310E Serial Number: C3TA11005E Connectivity: RS-232 Input Connection: Default Metrology Institute: China National Accreditation Service for Conformity Assessment(CNAS) Accredited by: Calibration and Testing Center of CEPREI Calibration Label: QDCT170324337-28 Date of Calibration: 27-Jul-2017 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 0 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: placed in front the main airflow inlet of the SUT less than 50mm. Notes SPECpower_ssj.props input.load_level.number_warehouses set to 224 due to a known inconsistency in processor reporting with this Java version Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 726 | 20.4 90% | 645 | 20.3 80% | 546 | 20.6 70% | 477 | 20.6 60% | 421 | 20.5 50% | 371 | 20.4 40% | 333 | 20.3 30% | 303 | 20.5 20% | 273 | 20.7 10% | 233 | 20.7 Active Idle | 158 | 20.7 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.3 | 57 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20180606-00818-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 9,999,298 Calibration 2 | | | 9,938,464 Calibration 3 | | | 9,962,596 ssj_ops@calibrated=9,950,530 100% | 99.7% | 9,950,530 | 9,920,959 90% | 90.0% | 8,955,477 | 8,953,246 80% | 80.1% | 7,960,424 | 7,967,897 70% | 70.0% | 6,965,371 | 6,960,998 60% | 60.0% | 5,970,318 | 5,968,895 50% | 49.9% | 4,975,265 | 4,968,209 40% | 39.9% | 3,980,212 | 3,972,995 30% | 30.1% | 2,985,159 | 2,992,565 20% | 20.1% | 1,990,106 | 1,996,794 10% | 10.0% | 995,053 | 994,857 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20180606-00818.WIN-8CI1D8G91UD.txt) for additional details. Copyright (C) 2007-2018 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]