SPECpower_ssj2008 Copyright (C) 2007-2015 Standard Performance Evaluation Corporation Hewlett-Packard Company ProLiant DL560 Gen9 SPECpower_ssj2008 = NC overall ssj_ops/watt Test Sponsor: Hewlett-Packard Company SPEC License #: 3 Tested By: Hewlett-Packard Company Test Location: Houston, TX, USA Test Date: Jul 7, 2015 Publication: Sep 29, 2015 Hardware Availability: Jun-2015 Software Availability: Jun-2013 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered SPEC has determined that this result is not in compliance with the SPECpower_ssj2008 run and reporting rules. Specifically, this result has been marked as Non-Compliant because more than three years elapsed between the Java Runtime Environment General Availability date and the processor General Availability, and more than four years between the Operating System General Availability and the processor General Availability. Replacement results can be found at: http://www.spec.org/power_ssj2008/results/res2016q2/power_ssj2008-20160607-0073 4.html System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett-Packard Company Model: ProLiant DL560 Gen9 Form Factor: 2U CPU Name: Intel Xeon E5-4669 v3 2.10 GHz CPU Characteristics: 18-Core, 2.10 GHz, 45MB L3 Cache CPU Frequency (MHz): 2100 CPU(s) Enabled: 72 cores, 4 chips, 18 cores/chip Hardware Threads: 144 (2 / core) CPU(s) Orderable: 1,2,4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 MB I+D on chip per core Tertiary Cache: 45 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 128 # and size of DIMM: 16 x 8182 MB Memory Details: 8GB 2Rx8 PC4-2133P-R; slots 1, 4, 9 and 12 for each processor Power Supply Quantity and Rating 1 x 1200 (W): Power Supply Details: 656364-B21 Disk Drive: 1 x 100GB SSD SATA (691862-B21) Disk Controller: Smart Array P420i RAID controller (embedded) # and type of Network Interface 1 x HP Ethernet 1Gb 4-port 331FLR Adapter Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 amd64-64 20120322_106209 (JIT enabled, AOT enabled)) JVM Command-line Options: -Xmn825m -Xms950m -Xmx950m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads4 JVM Affinity: start /node [0, 1, 2, 3] /affinity [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000,0xC0000,0x300000,0xC00000,0x3000000 ,0xC000000,0x30000000,0xC0000000,0x300000000 ,0xC00000000] JVM Instances: 72 JVM Initial Heap (MB): 950 JVM Maximum Heap (MB): 950 JVM Address Bits: 64 Boot Firmware Version: P85 1.40 05/06/2015 Management Firmware Version: 2.30 pass 22 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) Boot Firmware Settings * USB Control - External USB Ports Disabled * Boot Options - Legacy BIOS Mode * Power Regulator = OS Control Mode * HP Power Profile = Balanced Power and Performance * Maximum Memory Bus Frequency = Auto * Dynamic Power Savings Mode Response = Slow * Collaborative Control = Enabled * Redundant Power Supply Mode = Balanced Mode * Intel Turbo Boost Technology = Disabled * Node Interleaving = Disabled * HW Prefetcher = Disabled * Adjacent Sector Prefetch = Disabled * DCU Streamer Prefetcher = Disabled * NUMA Group Size Optimization = Clustered * Embedded: SATA Controller #2 = Disabled * Memory Patrol Scrubbing = Disabled * Memory Refresh Rate = 1x Refresh Management Firmware Settings See SUT Notes System Under Test Notes * Turn off hard disk after 1 minute * Display set to turn off after 1 minute * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Run initiated via Windows Remote Desktop Connection * SPECpower_ssj.props input.load_level.number_warehouses set to 144 to detect the full number of available processors on the SUT * Microsoft Hotfix KB2510206 has been installed due to known problems of the group assignment algorithm which does not create a balanced group assignment. For more information see: http://support.microsoft.com/kb/2510206 Controller System HARDWARE Hardware Vendor: Hewlett-Packard Company Model: ProLiant DL360 G7 CPU Description: Intel Xeon X5675 Memory amount (GB): 32 SOFTWARE Operating System (OS): Windows Server 2012 SP2 - V6.2 9200 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_05-b13 (build 25.5-b02, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91K112851 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: HP Metrology Calibration Label: 705948 Date of Calibration: 11-Mar-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.1-6ff11330-20150212 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Copyright (C) 2007-2015 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]