SPECpower_ssj2008 Copyright (C) 2007-2015 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX2530 M1 SPECpower_ssj2008 = 9,811 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Jan 9, 2015 Publication: Feb 5, 2015 Hardware Availability: Feb-2015 Software Availability: Jun-2013 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 100.0% | 3,231,698 | 289 | 11,191 90% | 89.9% | 2,906,711 | 260 | 11,173 80% | 79.9% | 2,584,271 | 230 | 11,236 70% | 70.0% | 2,263,620 | 199 | 11,377 60% | 59.9% | 1,937,836 | 172 | 11,283 50% | 50.1% | 1,618,047 | 153 | 10,544 40% | 40.0% | 1,292,232 | 138 | 9,367 30% | 30.0% | 970,277 | 123 | 7,896 20% | 20.0% | 646,383 | 108 | 5,982 10% | 10.0% | 322,218 | 92.3 | 3,492 Active Idle | 0 | 47.3 | 0 sum of ssj_ops / sum of power = | 9,811 System Under Test Set: 'RX2530 M1' Set Identifier: RX2530 M1 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX2530 M1 Form Factor: 1U CPU Name: Intel Xeon E5-2699 v3 CPU Characteristics: 18-Core, 2.30GHz, 45MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 36 cores, 2 chips, 18 cores/chip Hardware Threads: 72 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 45 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8192 MB Memory Details: 8 GB DDR4, registered, ECC, 2133 MHz, PC4-2133R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F615-E10 Disk Drive: 1 x DOM SATA 6G 64GB Main N H-P, S26361-F5522-E64 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN AP 1x1Gbit Cu Intel I210-T1 LP Cards (NICs) Installed: (Copper), S26361-F3852-E201 NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) JVM Command-line Options: -Xmn825m -Xms975m -Xmx975m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads2 (-Xgcthreads1 for JVM5 and JVM23) JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000] JVM Instances: 36 JVM Initial Heap (MB): 975 JVM Maximum Heap (MB): 975 JVM Address Bits: 64 Boot Firmware Version: R1.11.0 Management Firmware Version: 7.69F Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS. * Set "Power Technology = Custom" in BIOS. * Set "QPI Link Frequency Select = 6.4 GT/s" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "ASPM Support = L1 Only" in BIOS. * Set "DMI Control = Gen1" in BIOS. * Set "COD Enable = Enabled" in BIOS. * Set "Early Snoop = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Microsoft Hotfix KB2510206 has been installed due to known problems of the group assignment algorithm which does not create a balanced group assignment. For more information see: http://support.microsoft.com/kb/2510206 Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S6 CPU Description: Intel Xeon X5680 Memory amount (GB): 48 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: ZES Zimmer Electronic Systems GmbH Model: LMG95 Serial Number: 11210802 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Atlas Copco Tools Central Europe GmbH Calibration Label: W14113561 Date of Calibration: 21-Nov-2014 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.0-538b1562-20140802 Setup Description: Connected to PSU TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 72 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 289 | 20.9 90% | 260 | 20.9 80% | 230 | 20.9 70% | 199 | 20.9 60% | 172 | 20.9 50% | 153 | 20.8 40% | 138 | 20.8 30% | 123 | 20.8 20% | 108 | 20.8 10% | 92.3 | 20.8 Active Idle | 47.3 | 20.7 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.7 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20150114-00683-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,069,394 Calibration 2 | | | 3,222,650 Calibration 3 | | | 3,230,909 Calibration 4 | | | 3,234,479 ssj_ops@calibrated=3,232,694 100% | 100.0% | 3,232,694 | 3,231,698 90% | 89.9% | 2,909,425 | 2,906,711 80% | 79.9% | 2,586,155 | 2,584,271 70% | 70.0% | 2,262,886 | 2,263,620 60% | 59.9% | 1,939,616 | 1,937,836 50% | 50.1% | 1,616,347 | 1,618,047 40% | 40.0% | 1,293,078 | 1,292,232 30% | 30.0% | 969,808 | 970,277 20% | 20.0% | 646,539 | 646,383 10% | 10.0% | 323,269 | 322,218 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20150114-00683.Node_01.txt) for additional details. Copyright (C) 2007-2015 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]