SPECpower_ssj2008 Copyright (C) 2007-2012 Standard Performance Evaluation Corporation Fujitsu PRIMERGY TX140 S1p (Intel Xeon E3-1265LV2) SPECpower_ssj2008 = 5,887 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Jun 14, 2012 Publication: Jul 11, 2012 Hardware Availability: May-2012 Software Availability: Feb-2012 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.8% | 417,806 | 55.3 | 7,552 90% | 90.5% | 379,054 | 52.8 | 7,181 80% | 79.9% | 334,346 | 46.9 | 7,128 70% | 69.6% | 291,224 | 40.2 | 7,239 60% | 59.4% | 248,867 | 36.0 | 6,905 50% | 49.9% | 209,078 | 33.4 | 6,259 40% | 40.2% | 168,269 | 30.5 | 5,516 30% | 29.8% | 124,943 | 28.1 | 4,452 20% | 20.2% | 84,388 | 25.5 | 3,307 10% | 9.9% | 41,606 | 22.9 | 1,816 Active Idle | 0 | 18.9 | 0 sum of ssj_ops / sum of power = | 5,887 System Under Test Set: 'TX140 S1p' Set Identifier: TX140 S1p Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY TX140 S1p (Intel Xeon E3-1265LV2) Form Factor: Tower CPU Name: Intel Xeon E3-1265LV2 CPU Characteristics: Quad-Core, 2.50GHz, 8MB L3 Cache (Turbo Boost Technology up to 3.50 GHz) CPU Frequency (MHz): 2500 CPU(s) Enabled: 4 cores, 1 chip, 4 cores/chip Hardware Threads: 8 (2 / core) CPU(s) Orderable: 1 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 8 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 8 # and size of DIMM: 2 x 4096 MB Memory Details: 4GB 2Rx8 PC3L-12800E ECC CL11; slots 1A, 1B populated Power Supply Quantity and Rating 1 x 300 (W): Power Supply Details: Fujitsu Technology Solutions S26113-E581-V50-02 Disk Drive: 1 x 160GB, HDD, 2.5" SATA, S26361-F3297-E160 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x Intel 82574L and 1 x Intel 82579LM Cards (NICs) Installed: Gigabit Network Connection (onboard) NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise with SP1 OS Version: Version 6.1.7601 Service Pack 1 Build 7601 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_31 JVM Command-line Options: -server -Xmx1024m -Xms1024m -Xmn853m -XX:ParallelGCThreads=2 -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:LoopUnrollLimit=45 -XX:+UseCompressedStrings -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /affinity [0x03,0x0C,0x30,0xC0] JVM Instances: 4 JVM Initial Heap (MB): 1024 JVM Maximum Heap (MB): 1024 JVM Address Bits: 64 Boot Firmware Version: R1.10.0 Management Firmware Version: 6.51A Workload Version: SSJ 1.2.9 Director Location: Controller Other Software: None Boot Firmware Settings * Set "SATA Mode Selection = AHCI Mode" in BIOS. * Set "Hardware Prefetch = Disabled" in BIOS. * Set "Adjacent Sector Prefetch = Disabled" in BIOS. * Set "USB Port Control = Disable All Ports" in BIOS. * Set "Intel Virtualization Technology = Disable" in BIOS. * Set "ASPM Support = Auto" in BIOS. * Set "P-State coordination = SW_ANY" in BIOS. * Set "LAN 1 Port = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "System Idle Power Saver = Enabled" in LAN configuration. * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX100 S3 CPU Description: Pentium D 950 Memory amount (GB): 2 SOFTWARE Operating System (OS): Windows Server 2003 Enterprise Edition + SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle JRockit(R) R27.6.0 (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-w indows-ia32) CCS Version: 1.2.5 Measurement Devices POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91HA48097 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Kalibrierdienst Stenger Calibration Label: 11111753 Date of Calibration: 14-Nov-2011 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.4.1-1271fb18-20110728 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.10.26.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes SPECpower_ssj.props input.load_level.number_warehouses set to 8 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 55.3 | 20.1 90% | 52.8 | 20.1 80% | 46.9 | 20.1 70% | 40.2 | 20.2 60% | 36.0 | 20.1 50% | 33.4 | 20.1 40% | 30.5 | 20.1 30% | 28.1 | 20.1 20% | 25.5 | 20.1 10% | 22.9 | 20.1 Active Idle | 18.9 | 20.1 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.1 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20120625-00503-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 418,955 Calibration 2 | | | 419,612 Calibration 3 | | | 417,722 ssj_ops@calibrated=418,667 100% | 99.8% | 418,667 | 417,806 90% | 90.5% | 376,800 | 379,054 80% | 79.9% | 334,934 | 334,346 70% | 69.6% | 293,067 | 291,224 60% | 59.4% | 251,200 | 248,867 50% | 49.9% | 209,333 | 209,078 40% | 40.2% | 167,467 | 168,269 30% | 29.8% | 125,600 | 124,943 20% | 20.2% | 83,733 | 84,388 10% | 9.9% | 41,867 | 41,606 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20120625-00503.WIN-RPMHJC10L3A.txt) for additional details. Copyright (C) 2007-2012 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]