SPECweb96 Result

Performance

Throughput (ops/sec) Response (msec) 840 4.8 1680 5.1 2520 5.6 3360 6.0 4200 6.5 5040 7.1 5881 7.9 6721 9.2 7561 10.5 8246 19.5

Configuration

Notes

Network Notes

• Each ACEswitch 180 connects one card in the SUT and 4 clients.
  
• MTU size = 9000 bytes.
  

Other Notes

• IIS settings: listen port 80, no logging, maximum performance.
  
• IIS Home Directory: Access for Read and Directory Browsing Allowed
  
  only, Application Settings permissions "none".
  
• One 9GB 10KRPM disk for OS and pagefile, 2 9GB 10KRPM disks striped
  
  for web pages and logs.
  
• Registry Settings:
  
• - Tcpip/Parameters/MaxHashTableSize=0x10000, sets TCB hash table
  
  size to 65,536 entries, default is 512.
  
• - Tcpip/Parameters/TcpTimedWaitDelay=0x3c, sets TIME_WAIT parameter
  
  to 60 seconds (non-RFC 1122), default is 240.
  
• - Tcpip/Parameters/MaxFreeTwTcbs=976000, sets maximum number of
  
  TIME_WAIT tcbs to 976,000.
  
• - Tcpip/Parameters/MaxSendSegments = 0x1000, sets maximum TCP
  
  segments sent consecutively to a destination, default 64.
  
• - Tcpip/Parameters/NumTcbTablePartitions = 32, sets number of
  
  independent TCB table segments, default 4.
  
• - NDIS/Parameters/ProcessorAffinityMask=0, forces processor that
  
  handled interrupt to also handle that DPC, default is any processor.
  
• - Inetinfo/Parameters/ObjectCacheTTL=0, sets IIS object cache
  
  timeout to 0 seconds, default 10 minutes
  
• - Inetinfo/Parameters/OpenFileInCache=0, sets number of open files
  
  in object cache to 0
  
• - Inetinfo/Parameters/MaxPoolThreads=1, sets pool threads per
  
  processor, default is 10
  
• - Inetinfo/Parameters/PoolThreadLimit=4, sets total pool threads per
  
  system to 4
  
• For each Alteon NIC:
  
• - Altndis(X)/Parameters/SendCoalMax=80, sets number of send buffer
  
  descriptors in send ring, default 333.
  
• - Altndis(X)/Parameters/RecvCoalMax=20, sets number of frames
  
  received before notifying host, default 333.
  
• - Altndis(X)/Parameters/SendCoalTicks=1000, sets number of microsec.
  
  before send buffers are returned to host, default 2.
  
• - Altndis(X)/Parameters/RecvCoalTicks=1000, sets number of microsec.
  
  before recv buffers are given to host, default 2.
  
• - Altndis(X)/Parameters/JumboFrames=1, enables Jumbo Frame
  
  support.
  
• Alternate HTTP/HT.c used. Repeated client-side calls to
  
  gethostbyname() omitted, as approved
  
• by SPEC. No change in measured server performance but reduction in
  
  client load.
  

Test Run Details