# Invocation command line: # /home/ub/cpu17/bin/harness/runcpu --action validate --define default-platform-flags --define numcopies=48 --configfile esc-fprate-d.cfg --define smt-on --define cores=24 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak --output_format all --iterations 2 --output_format csv,html,pdf,txt --nopower --runmode rate --tune base:peak --size refrate --nopower --runmode rate --tune base:peak --size refrate fprate # output_root was not used for this run ############################################################################ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20221023 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic2022.0-lin-core-avx512-rate%{opt_label}%{static_label}-%{version} #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above # fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000 = http://www.spec.org/cpu2017/flags/Hexadata-ic2022-linux64-v1.0.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Hexadata-Platform-Flags-Intel-ICX-rev1.5.xml %ifdef %{default-platform-flags} %endif # Set some environment variables # Retain unused virtual memory for later reuse. This avoids out of memory errors for certain benchmarks. preENV_MALLOC_CONF = retain:true intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/lib/ia32:$[top]/je5.0.1-32 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif OPT_JCC = -mbranches-within-32B-boundaries OPT_JCC_icx = -mbranches-within-32B-boundaries #--------- Compilers ---------------------------------------------------------- default: CC = icx -w -m64 -std=c11 CXX = icpx -w -m64 FC = ifort -w -m64 # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib INTEL64_DIR = /opt/intel/oneapi/compiler/2022.0.1/linux/compiler/lib/intel64_lin INTEL32_DIR = /opt/intel/oneapi/compiler/2022.0.1/linux/compiler/lib/ia32_lin %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: %if defined (%{numcopies}) copies = %{numcopies} %else copies = 1 # EDIT to change number of copies (see above) %endif #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 default: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte -auto $(OPT_JCC) EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSEF) $(OPT_ROOT_F) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif fprate=default: EXTRA_LIBS = -l$(JEMALLOC64) -L$(JEMALLOC64_DIR) EXTRA_LDFLAGS = -Wl,-z,muldefs fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_NOIPO = -Ofast -ffast-math -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles OPT_ROOT_F_NOIPO = -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FORT_FAST_NO_STATIC_NOIPO = $(SSE) $(OPT_ROOT_F_NOIPO) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else # BASE Options COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif # Benchmarks with C/C++/Fortran: 507.cactuBSSN_r=base: COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC_NOIPO) -qopt-mem-layout-trans=4 # End of mixed languages intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -O3 -ffast-math OPT_ROOT_ICC = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 500.perlbench_r=peak=default: CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 EXTRA_OPTIMIZE = -fno-strict-overflow EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 525.x264_r=peak: feedback = 0 EXTRA_OPTIMIZE = -fno-alias 502.gcc_r=peak: CC = icx -m32 -std=gnu89 -L/usr/local/intel/compiler/2022.0.0/linux/compiler/lib/ia32_lin CXX = icpx -m32 -std=gnu89 -L/usr/local/intel/compiler/2022.0.0/linux/compiler/lib/ia32_lin FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) PASS1_CFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CFLAGS = -fprofile-use=default.profdata PASS1_FFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_FFLAGS = -fprofile-use=default.profdata PASS1_CXXFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CXXFLAGS = -fprofile-use=default.profdata PASS1_LDFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_LDFLAGS = -fprofile-use=default.profdata fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 557.xz_r=peak=default: feedback = 0 CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 505.mcf_r,520.omnetpp_r,523.xalancbmk_r,531.deepsjeng_r,548.exchange2_r,541.leela_r=peak: basepeak=1 fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -Ofast FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT_F) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT_F) -static FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 507.cactuBSSN_r,508.namd_r,519.lbm_r,526.blender_r,527.cam4_r=peak: basepeak=1 538.imagick_r,549.fotonik3d_r,997.specrand_fr=peak: basepeak=1 #fp rate subset for removing FDO 503.bwaves_r,510.parest_r,554.roms_r=peak=default: feedback = 0 %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif 511.povray_r,521.wrf_r=peak: CC = icc CXX = icpc FC = ifort OPT_ROOT = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) LDFLAGS = %undef% EXTRA_LDFLAGS = %undef% PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 544.nab_r=peak: basepeak=1 %if defined (%{smt-on}) %define numpeakcopies %{cores} %endif 503.bwaves_r,510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 2021.6.0 of Intel C/C++ sw_compiler001 = Intel 64 Compiler Classic for Linux; sw_compiler002 = Fortran: Version 2021.6.0 of Intel Fortran sw_compiler003 = Intel 64 Compiler Classic for Linux; sw_compiler004 = C/C++: Version 2022.1.0 of Intel oneAPI sw_compiler005 = DPC++/C++ Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit intspeed: sw_peak_ptrsize = 64-bit intrate: sw_peak_ptrsize = 32/64-bit #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Esconet Technologies Ltd. tester = Esconet Technologies Ltd. test_sponsor = Esconet Technologies Ltd. license_num = 6523 prepared_by = Esconet Technologies Ltd. #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = May-2021 # Date of LAST hardware component to ship sw_avail = May-2022 # Date of LAST software component to ship hw_cpu_nominal_mhz = 3000 # Nominal chip frequency, in MHz hw_cpu_max_mhz = 3600 # Max chip frequency, in MHz hw_ncores = 24 # number cores enabled hw_nthreadspercore = 2 hw_ncpuorder = 1, 2 chip(s) # Ordering options hw_model000 = Hexadata HDR-RM2386212I # system model name hw_model001 = (Intel Xeon Gold 5317,3.00 GHz) hw_other = None # Other perf-relevant hw, or "None" sw_other = jemalloc memory allocator V5.0.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 48 KB D on chip per core # Primary cache size, type, location hw_scache = 1.25 MB I+D on chip per core # Second cache or "None" hw_tcache = 18 MB I+D on chip per chip # Third cache or "None" hw_ocache = None # Other cache or "None" hw_memory000 = 1 TB (16 x 64 GB 2Rx4 PC4-3200AA-R running at hw_memory001 = 2933) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_cpu_name = Intel Xeon Gold 5317 # chip name hw_disk = 960 GB SSD # Size, type, other perf-relevant info hw_nchips = 2 # number chips enabled sw_file = xfs # File system sw_state = Run level 3 (multi-user) # Software state. sw_os000 = CentOS 8.5.2111 sw_os001 = 4.18.0-348.7.1.el8_5.x86_64 fw_bios = Version F26 released May-2023 #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM notes_005 = memory using Red Hat Enterprise Linux 8.4 notes_jemalloc_000 = jemalloc, a general purpose malloc implementation notes_jemalloc_005 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_010 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_010 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_015 = Prior to runcpu invocation notes_020 = Filesystem page cache synced and cleared with: notes_025 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_030 = runcpu command invoked through numactl i.e.: notes_035 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. default: fprate,fpspeed,intrate,intspeed: notes_plat_form_000 = notes_plat_form_005 = BIOS settings: fprate,intrate: notes_plat_form_010 = Sub NUMA Cluster : 2-Way Clustering fpspeed,intspeed: notes_plat_form_100 = Logical Processor : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_015 = Virtualization Technology : Disabled notes_plat_form_020 = notes_plat_form_025 = System Profile : Custom notes_plat_form_030 = CPU Power Management : Maximum Performance notes_plat_form_035 = C1E : Disabled notes_plat_form_040 = C States : Autonomous notes_plat_form_045 = Memory Patrol Scrub : Disabled notes_plat_form_050 = Energy Efficiency Policy : Performance notes_plat_form_055 = CPU Interconnect Bus Link notes_plat_form_060 = Power Management : Disabled notes_plat_form_065 = PCI ASPM L1 Link notes_plat_form_070 = Power Management : Disabled fprate,fpspeed,intrate,intspeed: # Cleanup from sysinfo hw_memory001 = %undef% hw_memory002 = %undef% sw_os001 = %undef% sw_os002 = %undef% # Mitigation notes_mitig_000 = notes_mitig_005 = NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_mitig_010 = is mitigated in the system as tested and documented. notes_mitig_015 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_mitig_020 = is mitigated in the system as tested and documented. notes_mitig_025 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_mitig_030 = is mitigated in the system as tested and documented. # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/ub/cpu17/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost.localdomain Thu Nov 16 23:09:34 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 239 (239-51.el8_5.2) notes_plat_sysinfo_105 = 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_110 = 13. Services, from systemctl list-unit-files notes_plat_sysinfo_115 = 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_120 = 15. cpupower frequency-info notes_plat_sysinfo_125 = 16. tuned-adm active notes_plat_sysinfo_130 = 17. sysctl notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_140 = 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_145 = 20. OS release notes_plat_sysinfo_150 = 21. Kernel self-reported vulnerability status, from /sys/devices/system/cpu/vulnerabilities notes_plat_sysinfo_155 = 22. Disk information notes_plat_sysinfo_160 = 23. /sys/devices/virtual/dmi/id notes_plat_sysinfo_165 = 24. dmidecode notes_plat_sysinfo_170 = 25. BIOS notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = notes_plat_sysinfo_185 = ------------------------------------------------------------ notes_plat_sysinfo_190 = 1. uname -a notes_plat_sysinfo_195 = Linux localhost.localdomain 4.18.0-348.7.1.el8_5.x86_64 #1 SMP Wed Dec 22 13:25:12 UTC 2021 x86_64 x86_64 notes_plat_sysinfo_200 = x86_64 GNU/Linux notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = ------------------------------------------------------------ notes_plat_sysinfo_215 = 2. w notes_plat_sysinfo_220 = 23:09:34 up 1 min, 1 user, load average: 0.42, 0.19, 0.07 notes_plat_sysinfo_225 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_230 = ub tty1 - 23:08 3.00s 1.11s 0.00s -bash notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = ------------------------------------------------------------ notes_plat_sysinfo_245 = 3. Username notes_plat_sysinfo_250 = From environment variable $USER: ub notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = ------------------------------------------------------------ notes_plat_sysinfo_265 = 4. ulimit -a notes_plat_sysinfo_270 = core file size (blocks, -c) unlimited notes_plat_sysinfo_275 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_280 = scheduling priority (-e) 0 notes_plat_sysinfo_285 = file size (blocks, -f) unlimited notes_plat_sysinfo_290 = pending signals (-i) 4125609 notes_plat_sysinfo_295 = max locked memory (kbytes, -l) 64 notes_plat_sysinfo_300 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_305 = open files (-n) 1024 notes_plat_sysinfo_310 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_315 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_320 = real-time priority (-r) 0 notes_plat_sysinfo_325 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_330 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_335 = max user processes (-u) 4125609 notes_plat_sysinfo_340 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_345 = file locks (-x) unlimited notes_plat_sysinfo_350 = notes_plat_sysinfo_355 = ------------------------------------------------------------ notes_plat_sysinfo_360 = 5. sysinfo process ancestry notes_plat_sysinfo_365 = /usr/lib/systemd/systemd --switched-root --system --deserialize 18 notes_plat_sysinfo_370 = login -- ub notes_plat_sysinfo_375 = -bash notes_plat_sysinfo_380 = -bash notes_plat_sysinfo_385 = runcpu --action validate --define default-platform-flags --define numcopies=48 --configfile esc-fprate-d.cfg notes_plat_sysinfo_390 = --define smt-on --define cores=24 --define physicalfirst --define invoke_with_interleave --define notes_plat_sysinfo_395 = drop_caches --tune base,peak --output_format all --iterations 2 --output_format csv,html,pdf,txt --nopower notes_plat_sysinfo_400 = --runmode rate --tune base:peak --size refrate fprate notes_plat_sysinfo_405 = runcpu --action validate --define default-platform-flags --define numcopies=48 --configfile esc-fprate-d.cfg notes_plat_sysinfo_410 = --define smt-on --define cores=24 --define physicalfirst --define invoke_with_interleave --define notes_plat_sysinfo_415 = drop_caches --tune base,peak --output_format all --iterations 2 --output_format csv,html,pdf,txt --nopower notes_plat_sysinfo_420 = --runmode rate --tune base:peak --size refrate --nopower --runmode rate --tune base:peak --size refrate notes_plat_sysinfo_425 = fprate --nopreenv --note-preenv --logfile $SPEC/tmp/CPU2017.084/templogs/preenv.fprate.084.0.log --lognum notes_plat_sysinfo_430 = 084.0 --from_runcpu 2 notes_plat_sysinfo_435 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_440 = $SPEC = /home/ub/cpu17 notes_plat_sysinfo_445 = notes_plat_sysinfo_450 = ------------------------------------------------------------ notes_plat_sysinfo_455 = 6. /proc/cpuinfo notes_plat_sysinfo_460 = model name : Intel(R) Xeon(R) Gold 5317 CPU @ 3.00GHz notes_plat_sysinfo_465 = vendor_id : GenuineIntel notes_plat_sysinfo_470 = cpu family : 6 notes_plat_sysinfo_475 = model : 106 notes_plat_sysinfo_480 = stepping : 6 notes_plat_sysinfo_485 = microcode : 0xd0003a5 notes_plat_sysinfo_490 = bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs notes_plat_sysinfo_495 = cpu cores : 12 notes_plat_sysinfo_500 = siblings : 24 notes_plat_sysinfo_505 = 2 physical ids (chips) notes_plat_sysinfo_510 = 48 processors (hardware threads) notes_plat_sysinfo_515 = physical id 0: core ids 0-11 notes_plat_sysinfo_520 = physical id 1: core ids 0-11 notes_plat_sysinfo_525 = physical id 0: apicids 0-23 notes_plat_sysinfo_530 = physical id 1: apicids 64-87 notes_plat_sysinfo_535 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_540 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_545 = notes_plat_sysinfo_550 = ------------------------------------------------------------ notes_plat_sysinfo_555 = 7. lscpu notes_plat_sysinfo_560 = notes_plat_sysinfo_565 = From lscpu from util-linux 2.32.1: notes_plat_sysinfo_570 = Architecture: x86_64 notes_plat_sysinfo_575 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_580 = Byte Order: Little Endian notes_plat_sysinfo_585 = CPU(s): 48 notes_plat_sysinfo_590 = On-line CPU(s) list: 0-47 notes_plat_sysinfo_595 = Thread(s) per core: 2 notes_plat_sysinfo_600 = Core(s) per socket: 12 notes_plat_sysinfo_605 = Socket(s): 2 notes_plat_sysinfo_610 = NUMA node(s): 2 notes_plat_sysinfo_615 = Vendor ID: GenuineIntel notes_plat_sysinfo_620 = CPU family: 6 notes_plat_sysinfo_625 = Model: 106 notes_plat_sysinfo_630 = Model name: Intel(R) Xeon(R) Gold 5317 CPU @ 3.00GHz notes_plat_sysinfo_635 = Stepping: 6 notes_plat_sysinfo_640 = CPU MHz: 3000.000 notes_plat_sysinfo_645 = CPU max MHz: 3600.0000 notes_plat_sysinfo_650 = CPU min MHz: 800.0000 notes_plat_sysinfo_655 = BogoMIPS: 6000.00 notes_plat_sysinfo_660 = Virtualization: VT-x notes_plat_sysinfo_665 = L1d cache: 48K notes_plat_sysinfo_670 = L1i cache: 32K notes_plat_sysinfo_675 = L2 cache: 1280K notes_plat_sysinfo_680 = L3 cache: 18432K notes_plat_sysinfo_685 = NUMA node0 CPU(s): 0-11,24-35 notes_plat_sysinfo_690 = NUMA node1 CPU(s): 12-23,36-47 notes_plat_sysinfo_695 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts notes_plat_sysinfo_700 = acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art notes_plat_sysinfo_705 = arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni notes_plat_sysinfo_710 = pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca notes_plat_sysinfo_715 = sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm notes_plat_sysinfo_720 = abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single intel_ppin ssbd mba ibrs ibpb notes_plat_sysinfo_725 = stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust notes_plat_sysinfo_730 = sgx bmi1 hle avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_735 = avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec notes_plat_sysinfo_740 = xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local split_lock_detect notes_plat_sysinfo_745 = wbnoinvd dtherm ida arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req avx512vbmi notes_plat_sysinfo_750 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme notes_plat_sysinfo_755 = avx512_vpopcntdq la57 rdpid sgx_lc fsrm md_clear pconfig flush_l1d arch_capabilities notes_plat_sysinfo_760 = notes_plat_sysinfo_765 = ------------------------------------------------------------ notes_plat_sysinfo_770 = 8. numactl --hardware notes_plat_sysinfo_775 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_780 = available: 2 nodes (0-1) notes_plat_sysinfo_785 = node 0 cpus: 0-11,24-35 notes_plat_sysinfo_790 = node 0 size: 515350 MB notes_plat_sysinfo_795 = node 0 free: 512731 MB notes_plat_sysinfo_800 = node 1 cpus: 12-23,36-47 notes_plat_sysinfo_805 = node 1 size: 516088 MB notes_plat_sysinfo_810 = node 1 free: 513137 MB notes_plat_sysinfo_815 = node distances: notes_plat_sysinfo_820 = node 0 1 notes_plat_sysinfo_825 = 0: 10 20 notes_plat_sysinfo_830 = 1: 20 10 notes_plat_sysinfo_835 = notes_plat_sysinfo_840 = ------------------------------------------------------------ notes_plat_sysinfo_845 = 9. /proc/meminfo notes_plat_sysinfo_850 = MemTotal: 1056193072 kB notes_plat_sysinfo_855 = notes_plat_sysinfo_860 = ------------------------------------------------------------ notes_plat_sysinfo_865 = 10. who -r notes_plat_sysinfo_870 = run-level 3 Nov 16 23:08 notes_plat_sysinfo_875 = notes_plat_sysinfo_880 = ------------------------------------------------------------ notes_plat_sysinfo_885 = 11. Systemd service manager version: systemd 239 (239-51.el8_5.2) notes_plat_sysinfo_890 = Default Target Status notes_plat_sysinfo_895 = multi-user degraded notes_plat_sysinfo_900 = notes_plat_sysinfo_905 = ------------------------------------------------------------ notes_plat_sysinfo_910 = 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_915 = UNIT LOAD ACTIVE SUB DESCRIPTION notes_plat_sysinfo_920 = * sep5.service loaded failed failed systemd script to load sep5 driver at boot time notes_plat_sysinfo_925 = notes_plat_sysinfo_930 = ------------------------------------------------------------ notes_plat_sysinfo_935 = 13. Services, from systemctl list-unit-files notes_plat_sysinfo_940 = STATE UNIT FILES notes_plat_sysinfo_945 = enabled NetworkManager NetworkManager-dispatcher NetworkManager-wait-online auditd autovt@ crond notes_plat_sysinfo_950 = firewalld getty@ import-state irqbalance kdump loadmodules lvm2-monitor mdmonitor microcode notes_plat_sysinfo_955 = nis-domainname rsyslog selinux-autorelabel-mark sep5 sshd sssd syslog tuned udisks2 notes_plat_sysinfo_960 = disabled blk-availability console-getty cpupower debug-shell ebtables iprdump iprinit iprupdate kvm_stat notes_plat_sysinfo_965 = man-db-restart-cache-update nftables rdisc serial-getty@ sshd-keygen@ systemd-resolved tcsd notes_plat_sysinfo_970 = indirect sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo notes_plat_sysinfo_975 = notes_plat_sysinfo_980 = ------------------------------------------------------------ notes_plat_sysinfo_985 = 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_990 = BOOT_IMAGE=(hd1,gpt2)/vmlinuz-4.18.0-348.7.1.el8_5.x86_64 notes_plat_sysinfo_995 = root=/dev/mapper/cl-root notes_plat_sysinfo_1000= ro notes_plat_sysinfo_1005= crashkernel=auto notes_plat_sysinfo_1010= resume=/dev/mapper/cl-swap notes_plat_sysinfo_1015= rd.lvm.lv=cl/root notes_plat_sysinfo_1020= rd.lvm.lv=cl/swap notes_plat_sysinfo_1025= rhgb notes_plat_sysinfo_1030= quiet notes_plat_sysinfo_1035= notes_plat_sysinfo_1040= ------------------------------------------------------------ notes_plat_sysinfo_1045= 15. cpupower frequency-info notes_plat_sysinfo_1050= analyzing CPU 0: notes_plat_sysinfo_1055= current policy: frequency should be within 800 MHz and 3.60 GHz. notes_plat_sysinfo_1060= The governor "performance" may decide which speed to use notes_plat_sysinfo_1065= within this range. notes_plat_sysinfo_1070= boost state support: notes_plat_sysinfo_1075= Supported: yes notes_plat_sysinfo_1080= Active: yes notes_plat_sysinfo_1085= notes_plat_sysinfo_1090= ------------------------------------------------------------ notes_plat_sysinfo_1095= 16. tuned-adm active notes_plat_sysinfo_1100= Current active profile: throughput-performance notes_plat_sysinfo_1105= notes_plat_sysinfo_1110= ------------------------------------------------------------ notes_plat_sysinfo_1115= 17. sysctl notes_plat_sysinfo_1120= kernel.numa_balancing 1 notes_plat_sysinfo_1125= kernel.randomize_va_space 2 notes_plat_sysinfo_1130= vm.compaction_proactiveness 0 notes_plat_sysinfo_1135= vm.dirty_background_bytes 0 notes_plat_sysinfo_1140= vm.dirty_background_ratio 10 notes_plat_sysinfo_1145= vm.dirty_bytes 0 notes_plat_sysinfo_1150= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1155= vm.dirty_ratio 40 notes_plat_sysinfo_1160= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1165= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1170= vm.extfrag_threshold 500 notes_plat_sysinfo_1175= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1180= vm.nr_hugepages 2048 notes_plat_sysinfo_1185= vm.nr_hugepages_mempolicy 2048 notes_plat_sysinfo_1190= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1195= vm.swappiness 10 notes_plat_sysinfo_1200= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1205= vm.watermark_scale_factor 10 notes_plat_sysinfo_1210= vm.zone_reclaim_mode 0 notes_plat_sysinfo_1215= notes_plat_sysinfo_1220= ------------------------------------------------------------ notes_plat_sysinfo_1225= 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1230= defrag always defer defer+madvise [madvise] never notes_plat_sysinfo_1235= enabled [always] madvise never notes_plat_sysinfo_1240= hpage_pmd_size 2097152 notes_plat_sysinfo_1245= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1250= notes_plat_sysinfo_1255= ------------------------------------------------------------ notes_plat_sysinfo_1260= 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1265= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1270= defrag 1 notes_plat_sysinfo_1275= max_ptes_none 511 notes_plat_sysinfo_1280= max_ptes_swap 64 notes_plat_sysinfo_1285= pages_to_scan 4096 notes_plat_sysinfo_1290= scan_sleep_millisecs 10000 notes_plat_sysinfo_1295= notes_plat_sysinfo_1300= ------------------------------------------------------------ notes_plat_sysinfo_1305= 20. OS release notes_plat_sysinfo_1310= From /etc/*-release /etc/*-version notes_plat_sysinfo_1315= os-release CentOS Linux 8 notes_plat_sysinfo_1320= redhat-release CentOS Linux release 8.5.2111 notes_plat_sysinfo_1325= system-release CentOS Linux release 8.5.2111 notes_plat_sysinfo_1330= notes_plat_sysinfo_1335= ------------------------------------------------------------ notes_plat_sysinfo_1340= 21. Kernel self-reported vulnerability status, from /sys/devices/system/cpu/vulnerabilities notes_plat_sysinfo_1345= itlb_multihit Not affected notes_plat_sysinfo_1350= l1tf Not affected notes_plat_sysinfo_1355= mds Not affected notes_plat_sysinfo_1360= meltdown Not affected notes_plat_sysinfo_1365= spec_store_bypass Mitigation: Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_1370= spectre_v1 Mitigation: usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_1375= spectre_v2 Mitigation: Enhanced IBRS, IBPB: conditional, RSB filling notes_plat_sysinfo_1380= srbds Not affected notes_plat_sysinfo_1385= tsx_async_abort Not affected notes_plat_sysinfo_1390= For more information, see the Linux documentation on hardware vulnerabilities, for example notes_plat_sysinfo_1395= https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/index.html notes_plat_sysinfo_1400= notes_plat_sysinfo_1405= ------------------------------------------------------------ notes_plat_sysinfo_1410= 22. Disk information notes_plat_sysinfo_1415= SPEC is set to: /home/ub/cpu17 notes_plat_sysinfo_1420= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1425= /dev/mapper/cl-home xfs 819G 78G 742G 10% /home notes_plat_sysinfo_1430= notes_plat_sysinfo_1435= ------------------------------------------------------------ notes_plat_sysinfo_1440= 23. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1445= Vendor: ESCONET TECHNOLOGIES LTD. notes_plat_sysinfo_1450= Product: HEXADATA notes_plat_sysinfo_1455= Product Family: Server notes_plat_sysinfo_1460= notes_plat_sysinfo_1465= ------------------------------------------------------------ notes_plat_sysinfo_1470= 24. dmidecode notes_plat_sysinfo_1475= Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1480= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1485= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1490= "DMTF SMBIOS" standard. notes_plat_sysinfo_1495= Memory: notes_plat_sysinfo_1500= 16x Samsung M393A8G40AB2-CWE 64 GB 2 rank 3200, configured at 2933 notes_plat_sysinfo_1505= notes_plat_sysinfo_1510= notes_plat_sysinfo_1515= ------------------------------------------------------------ notes_plat_sysinfo_1520= 25. BIOS notes_plat_sysinfo_1525= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1530= BIOS Vendor: GIGABYTE notes_plat_sysinfo_1535= BIOS Version: F26 notes_plat_sysinfo_1540= BIOS Date: 05/29/2023 notes_plat_sysinfo_1545= BIOS Revision: 5.22 hw_cpu_name = Intel Xeon Gold 5317 hw_disk = 819 GB add more disk info here hw_memory001 = 1007.264 GB fixme: If using DDR4, the format is: hw_nchips = 2 hw_ncores = 24 hw_nthreadspercore = 2 prepared_by = ub (is never output, only tags rawfile) sw_file = xfs sw_os001 = CentOS Linux 8 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program