# Invocation command line: # /home/cpu2017-1.0.5/bin/harness/runcpu --configfile amd1806na-speed-revA.cfg --tune all --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD1806 SPEC CPU2017 V1.0.5 Speed Configuration File for 64-bit Linux # # File name : amd1806na-speed-revA.cfg # Creation Date : June 1, 2018 # CPU2017 Version : 1.0.5 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC/1.2.1 # Operating system version : Ubuntu 18.04 # Supported OS's : Ubuntu 16.04/18.04, RHEL 7.4/7.5, SLES 12 SP3 # Hardware : AMD Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 32/64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE; the only edits required to properly run these # binaries are made in AMD1806na-speed-revA.inc, which is generated by running # amd1806na-Step1-speed-revA.py. Please consult Readme.amd1806na-speed_revA.txt # for a few uncommon exceptions which require edits to this file. # # Description:# # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd1806na-speed_revA.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Naples-based servers with 32 cores per socket, SMT enabled and 512 GiB of DDR4 # memory distributed evenly among all 16 channels using 16 GiB DIMMs. # # To run the binary package on other Naples configurations, please review # "Readme.amd1806na-speed_revA.txt" for instructions on how to easily modify # the CPU2017 configuration include file "AMD1806na-speed-revA.inc". Typically, # the model number, number of sockets, SMT state and memory # size values will need to be changed in amd1806na-Step1-speed-revA.py. Also, # modify necessary system specific and test specific documentation in # AMD1806na-speed-revA.inc. Again, refer to Readme.amd-aocc.txt for more info. # # In most cases, it should be unnecessary to edit "amd1806na-speed-revA.cfg" or # any other file besides "AMD-aocc-speed.inc". # # The run script and accompanying binary package are designed to work on Ubuntu # 16.04/18.04, RHEL 7.4/7.5 and SLES 12 SP3. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This is usually # the only file that needs modification for runs. %define inc_file_name AMD1806na-speed-revA.inc #include: %{inc_file_name} # ----- Begin inclusion of 'AMD1806na-speed-revA.inc' ############################################################################ ################################################################################ ################################################################################ # File name: AMD1806na-speed-revA.inc # File generation code date: June 4, 2018 # File generation date/time: November 07, 2018 / 15:38:59 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 64 # The following macros define the speed thread count (used for base reportable): %define omp_thread_limit 128 %define speed_threads_count 64 %define gomp_cpu_affinity "0,8,16,24,32,40,48,56,2,10,18,26,34,42,50,58,4,12,20,28,36,44,52,60,6,14,22,30,38,46,54,62,1,9,17,25,33,41,49,57,3,11,19,27,35,43,51,59,5,13,21,29,37,45,53,61,7,15,23,31,39,47,55,63" # Specific, optimal thread counts: %define base_threads_count 64 %define base_gomp_cpu_affinity "0,8,16,24,32,40,48,56,2,10,18,26,34,42,50,58,4,12,20,28,36,44,52,60,6,14,22,30,38,46,54,62,1,9,17,25,33,41,49,57,3,11,19,27,35,43,51,59,5,13,21,29,37,45,53,61,7,15,23,31,39,47,55,63" %define peak_threads_count 64 %define peak_gomp_cpu_affinity "0,8,16,24,32,40,48,56,2,10,18,26,34,42,50,58,4,12,20,28,36,44,52,60,6,14,22,30,38,46,54,62,1,9,17,25,33,41,49,57,3,11,19,27,35,43,51,59,5,13,21,29,37,45,53,61,7,15,23,31,39,47,55,63" %define peak_exception "602.gcc_s,603.bwaves_s,619.lbm_s,620.omnetpp_s,621.wrf_s,623.xalancbmk_s,625.x264_s,627.cam4_s,628.pop2_s,631.deepsjeng_s,641.leela_s,644.nab_s" %define peak_exception_threads 128 %define peak_exception_gomp "0,64,16,80,32,96,48,112,8,72,24,88,40,104,56,120,2,66,18,82,34,98,50,114,10,74,26,90,42,106,58,122,4,68,20,84,36,100,52,116,12,76,28,92,44,108,60,124,6,70,22,86,38,102,54,118,14,78,30,94,46,110,62,126,1,65,17,81,33,97,49,113,9,73,25,89,41,105,57,121,3,67,19,83,35,99,51,115,11,75,27,91,43,107,59,123,5,69,21,85,37,101,53,117,13,77,29,93,45,109,61,125,7,71,23,87,39,103,55,119,15,79,31,95,47,111,63,127" ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =55 # (Your SPEC license number) tester =Dell Inc. test_sponsor =Dell Inc. hw_vendor =Dell Inc. hw_model000 =PowerEdge R7425 (AMD EPYC 7551, 2.00GHz) #--------- If you install new compilers, edit this section -------------------- sw_compiler000 =C/C++: Version 1.2.1 of AOCC sw_compiler001 =Fortran: Version 4.8.2 of GCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Dec-2018 # Date of LAST hardware component to ship sw_avail =Oct-2018 hw_cpu_name =AMD EPYC 7551 hw_cpu_nominal_mhz =2000 hw_cpu_max_mhz =3000 hw_ncores =64 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 1.6.7 released Oct-2018 sw_base_ptrsize =64-bit hw_pcache =64 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache =64 MB I+D on chip per chip, 8 MB shared / 4 cores hw_ocache =None ################################################################################ # Notes ################################################################################ notes_040 =Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using RHEL 7.4 notes_045 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_050 =is mitigated in the system as tested and documented. notes_055 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_060 =is mitigated in the system as tested and documented. notes_065 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_070 =is mitigated in the system as tested and documented. notes_075 =jemalloc: configured and built with GCC v4.8.5 notes_080 =in RHEL v7.2 under default conditions. notes_085 =jemalloc: sources available from jemalloc.net or notes_090 =https://github.com/jemalloc/jemalloc/releases notes_095 =jemalloc uses environment variable MALLOC_CONF notes_100 =with values narenas and lg_chunk: notes_105 =narenas: sets the maximum number of arenas to use notes_110 =for automatic multiplexing notes_115 =of threads and arenas. notes_120 =lg_chunk: set the virtual memory chunk size (log notes_125 =base 2). For example, notes_130 =lg_chunk:21 sets the default chunk size to 2^21 = notes_135 =2MiB. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runspec command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runspec notes_os_025 = notes_os_030 =Set dirty_ratio=8 to limit dirty cache to 8% of memory notes_os_035 =Set swappiness=1 to swap only if necessary notes_os_040 =Set zone_reclaim_mode=1 to free local node memory and avoid remote memory notes_os_045 =sync then drop_caches=3 to reset caches before invoking runcpu notes_os_050 = notes_os_055 =dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were notes_os_060 =all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). notes_os_065 = notes_os_070 =Transparent huge pages were enabled for this run (OS default) notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_comp_015 =The AOCC Gold Linker plugin was installed and used for the link stage. notes_comp_020 = notes_comp_025 =The AOCC Fortran Plugin version 1.2 was used to leverage AOCC optimizers notes_comp_030 =with gfortran. It is available here: notes_comp_035 =http://developer.amd.com/amd-aocc/ ################################################################################ # The following fields must be set here for Int Speed. ################################################################################ intspeed: sw_other000 =jemalloc: jemalloc memory allocator library sw_other001 = V4.5.0 sw_peak_ptrsize =32/64-bit ################################################################################ # The following fields must be set here for FP Speed. ################################################################################ fpspeed: sw_other =None # Other perf-relevant sw, or "None" sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 120 GB SATA SSD # ex: 1 x 1 TB SSD hw_memory000 =1 TB (16 x 64 GB 4DRx4 PC4-2667V-L) hw_memory001 = hw_memory002 = hw_nchips =2 prepared_by =Dell Inc. # ex: Advanced Micro Devices sw_file =ext4 # ex1: ext4, ex2: ntfs sw_os000 =Ubuntu 18.04.1 LTS sw_os001 =kernel 4.15.0-38 # ex: Kernel 4.4.0-87-generic sw_os002 = sw_state =Run level 3 (multi-user) # ex: Run level 3 (Full multiuser with network) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017-1.0.5/config/AMD1806na-speed-revA.inc' ################################################################################ # Auto-configured settings based on your .inc file ################################################################################ threads = %{speed_threads_count} ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext amd1806na-speed-revA # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # ################################################################################ # Paths -- MODIFY AS NEEDED (modification should not be necessary for runs) ################################################################################ # Set location of runtime libraries for runs or builds. preenv = 1 %define lib_dir amd1806-speed-libs-revA # The following path will have to be changed on the build system if different: JEMALLOC_LIB32_PATH = /root/work/cpu2017/v105/amd1806-speed-libs-revA/32 %if '%{allow_build}' eq 'false' fail_build = 1 # Runtime libraries: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/64:$[top]/%{lib_dir}/32:%{ENV_LD_LIBRARY_PATH} preENV_OMP_STACKSIZE = 192M preENV_OMP_PROC_BIND = true preENV_GOMP_CPU_AFFINITY = %{gomp_cpu_affinity} preENV_OMP_WAIT_POLICY = active %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH =$[top]/%{lib_dir}/64:$[top]/%{lib_dir}/32:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. NOTE: this value must be "yes" for the affinity generation # section of the rate config file. command_add_redirect = yes check_md5 = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc100-flags-revC-I.2018-11-13.xml flagsurl001 = http://www.spec.org/cpu2017/flags/gcc.2018-02-16.xml #flagsurl03 = $[top]/amd1806-INVALID-platform-revA-I.xml ignore_errors = no # label: Arbitrary string, tags your binaries & directories. label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak ################################ # End auto-configured settings # ################################ ################################################################################ # Compilers ################################################################################ default: CC = clang CXX = clang++ FC = gfortran CLD = clang FLD = clang CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default:# data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 EXTRA_LIBS = -fopenmp=libomp -lomp -ljemalloc -lamdlibm -lm # MATHLIBOPT must be set to -lamdlibm in order to ensure that -lm does not # precede it: MATHLIBOPT = -lamdlibm # This is done to LDOPTIMIZE so that xz will see -lamdlibm instead of -lm: LDOPTIMIZE = -z muldefs -lamdlibm # Benchmark-specific portability (anything other than data model # is allowed only where need is proven 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -fconvert=big-endian 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -fconvert=big-endian ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = -O3 -flto -ffast-math -march=znver1 -fstruct-layout=3 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mno-avx2 -mllvm -inline-threshold=1000 \ -flv-function-specialization \ -mllvm -enable-gvn-hoist -mllvm -function-specialize CXXOPTIMIZE = -O3 -flto -march=znver1 -ffast-math \ -mllvm -unroll-threshold=100 -flv-function-specialization \ -mllvm -enable-partial-unswitch \ -fremap-arrays -mllvm -inline-threshold=1000 FOPTIMIZE = -O3 -funroll-loops -ffast-math EXTRA_FFLAGS = -fplugin=dragonegg.so \ -fplugin-arg-dragonegg-llvm-option=-inline-threshold:1000 EXTRA_LDFLAGS = -flto -fuse-ld=lld \ -Wl,-mllvm -Wl,-function-specialize LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_FLIBS = -lgfortran # The following is necessary for 502/602 gcc: EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type -DUSE_OPENMP threads = %{base_threads_count} ENV_GOMP_CPU_AFFINITY = %{base_gomp_cpu_affinity} ######################### # intspeed tuning flags # ######################### intspeed: EXTRA_FFLAGS = -O3 -fplugin=dragonegg.so -flto \ -specs=integrated-as.specs \ -fplugin-arg-dragonegg-llvm-option=-disable-indvar-simplify \ -fplugin-arg-dragonegg-llvm-option=-unroll-aggressive \ -fplugin-arg-dragonegg-llvm-option=-unroll-threshold:150 LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split \ -Wl,-mllvm -Wl,-merge-constant \ -Wl,-mllvm -Wl,-unroll-aggressive \ -Wl,-mllvm -Wl,-unroll-threshold=150 ####################### # jemalloc tuning flags # ####################### ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = -Ofast -flto -march=znver1 -mno-sse4a -fstruct-layout=5 \ -mllvm -vectorize-memory-aggressively -mno-avx2 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mllvm -inline-threshold=1000 -mllvm -enable-gvn-hoist \ -flv-function-specialization \ -mllvm -enable-vectorize-compares CXXOPTIMIZE = -Ofast -flto -march=znver1 -flv-function-specialization \ -mllvm -unroll-threshold=100 -fremap-arrays \ -mllvm -inline-threshold=1000 FOPTIMIZE = -O3 -funroll-loops -ffast-math EXTRA_FFLAGS = -fplugin=dragonegg.so \ -fplugin-arg-dragonegg-llvm-option=-inline-threshold:1000 EXTRA_FLIBS = -lgfortran EXTRA_LDFLAGS = -flto -fuse-ld=lld \ -Wl,-mllvm -Wl,-function-specialize LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type -DUSE_OPENMP feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw threads = %{peak_threads_count} ENV_GOMP_CPU_AFFINITY = %{peak_gomp_cpu_affinity} %{peak_exception}=peak: threads = %{peak_exception_threads} ENV_GOMP_CPU_AFFINITY = %{peak_exception_gomp} 600.perlbench_s=peak: #lang='C' feedback = 1 623.xalancbmk_s=peak: #lang='CXX` EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX = clang++ -m32 -fuse-ld=lld CXXLD = clang++ -m32 -fuse-ld=lld EXTRA_LIBS = -fopenmp=libomp -lomp -L$[JEMALLOC_LIB32_PATH] -ljemalloc -lm LDOPTIMIZE = -z muldefs ENV_OMP_STACKSIZE = 128M 625.x264_s=peak: #lang='C' feedback = 1 641.leela_s=peak: #lang="C++" feedback = 1 # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:32259ebd59f3e93740723202f27c44c82ee68e0f2e40cd2ca50cfd5519772397) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017-1.0.5/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5974 of 2018-05-19 9bcde8f2999c33d61f64985e45859ea9 notes_plat_sysinfo_010 = running on user-PowerEdge-R7425 Fri Nov 23 09:11:54 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD EPYC 7551 32-Core Processor notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 128 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 32 notes_plat_sysinfo_075 = siblings : 64 notes_plat_sysinfo_080 = physical 0: cores 0 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 notes_plat_sysinfo_085 = 29 30 31 notes_plat_sysinfo_090 = physical 1: cores 0 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 notes_plat_sysinfo_095 = 29 30 31 notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From lscpu: notes_plat_sysinfo_110 = Architecture: x86_64 notes_plat_sysinfo_115 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_120 = Byte Order: Little Endian notes_plat_sysinfo_125 = CPU(s): 128 notes_plat_sysinfo_130 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_135 = Thread(s) per core: 2 notes_plat_sysinfo_140 = Core(s) per socket: 32 notes_plat_sysinfo_145 = Socket(s): 2 notes_plat_sysinfo_150 = NUMA node(s): 8 notes_plat_sysinfo_155 = Vendor ID: AuthenticAMD notes_plat_sysinfo_160 = CPU family: 23 notes_plat_sysinfo_165 = Model: 1 notes_plat_sysinfo_170 = Model name: AMD EPYC 7551 32-Core Processor notes_plat_sysinfo_175 = Stepping: 2 notes_plat_sysinfo_180 = CPU MHz: 2426.379 notes_plat_sysinfo_185 = BogoMIPS: 3992.30 notes_plat_sysinfo_190 = Virtualization: AMD-V notes_plat_sysinfo_195 = L1d cache: 32K notes_plat_sysinfo_200 = L1i cache: 64K notes_plat_sysinfo_205 = L2 cache: 512K notes_plat_sysinfo_210 = L3 cache: 8192K notes_plat_sysinfo_215 = NUMA node0 CPU(s): 0,8,16,24,32,40,48,56,64,72,80,88,96,104,112,120 notes_plat_sysinfo_220 = NUMA node1 CPU(s): 2,10,18,26,34,42,50,58,66,74,82,90,98,106,114,122 notes_plat_sysinfo_225 = NUMA node2 CPU(s): 4,12,20,28,36,44,52,60,68,76,84,92,100,108,116,124 notes_plat_sysinfo_230 = NUMA node3 CPU(s): 6,14,22,30,38,46,54,62,70,78,86,94,102,110,118,126 notes_plat_sysinfo_235 = NUMA node4 CPU(s): 1,9,17,25,33,41,49,57,65,73,81,89,97,105,113,121 notes_plat_sysinfo_240 = NUMA node5 CPU(s): 3,11,19,27,35,43,51,59,67,75,83,91,99,107,115,123 notes_plat_sysinfo_245 = NUMA node6 CPU(s): 5,13,21,29,37,45,53,61,69,77,85,93,101,109,117,125 notes_plat_sysinfo_250 = NUMA node7 CPU(s): 7,15,23,31,39,47,55,63,71,79,87,95,103,111,119,127 notes_plat_sysinfo_255 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_260 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_265 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid amd_dcm aperfmperf pni notes_plat_sysinfo_270 = pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c notes_plat_sysinfo_275 = rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch notes_plat_sysinfo_280 = osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb notes_plat_sysinfo_285 = hw_pstate sme ssbd ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap notes_plat_sysinfo_290 = clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt notes_plat_sysinfo_295 = lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter notes_plat_sysinfo_300 = pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = /proc/cpuinfo cache data notes_plat_sysinfo_315 = cache size : 512 KB notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_330 = physical chip. notes_plat_sysinfo_335 = available: 8 nodes (0-7) notes_plat_sysinfo_340 = node 0 cpus: 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 notes_plat_sysinfo_345 = node 0 size: 128638 MB notes_plat_sysinfo_350 = node 0 free: 128334 MB notes_plat_sysinfo_355 = node 1 cpus: 2 10 18 26 34 42 50 58 66 74 82 90 98 106 114 122 notes_plat_sysinfo_360 = node 1 size: 128999 MB notes_plat_sysinfo_365 = node 1 free: 128822 MB notes_plat_sysinfo_370 = node 2 cpus: 4 12 20 28 36 44 52 60 68 76 84 92 100 108 116 124 notes_plat_sysinfo_375 = node 2 size: 129020 MB notes_plat_sysinfo_380 = node 2 free: 128831 MB notes_plat_sysinfo_385 = node 3 cpus: 6 14 22 30 38 46 54 62 70 78 86 94 102 110 118 126 notes_plat_sysinfo_390 = node 3 size: 129020 MB notes_plat_sysinfo_395 = node 3 free: 128797 MB notes_plat_sysinfo_400 = node 4 cpus: 1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121 notes_plat_sysinfo_405 = node 4 size: 129020 MB notes_plat_sysinfo_410 = node 4 free: 128754 MB notes_plat_sysinfo_415 = node 5 cpus: 3 11 19 27 35 43 51 59 67 75 83 91 99 107 115 123 notes_plat_sysinfo_420 = node 5 size: 129020 MB notes_plat_sysinfo_425 = node 5 free: 128831 MB notes_plat_sysinfo_430 = node 6 cpus: 5 13 21 29 37 45 53 61 69 77 85 93 101 109 117 125 notes_plat_sysinfo_435 = node 6 size: 129020 MB notes_plat_sysinfo_440 = node 6 free: 128804 MB notes_plat_sysinfo_445 = node 7 cpus: 7 15 23 31 39 47 55 63 71 79 87 95 103 111 119 127 notes_plat_sysinfo_450 = node 7 size: 129018 MB notes_plat_sysinfo_455 = node 7 free: 128782 MB notes_plat_sysinfo_460 = node distances: notes_plat_sysinfo_465 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_470 = 0: 10 16 16 16 28 28 22 28 notes_plat_sysinfo_475 = 1: 16 10 16 16 28 28 28 22 notes_plat_sysinfo_480 = 2: 16 16 10 16 22 28 28 28 notes_plat_sysinfo_485 = 3: 16 16 16 10 28 22 28 28 notes_plat_sysinfo_490 = 4: 28 28 22 28 10 16 16 16 notes_plat_sysinfo_495 = 5: 28 28 28 22 16 10 16 16 notes_plat_sysinfo_500 = 6: 22 28 28 28 16 16 10 16 notes_plat_sysinfo_505 = 7: 28 22 28 28 16 16 16 10 notes_plat_sysinfo_510 = notes_plat_sysinfo_515 = From /proc/meminfo notes_plat_sysinfo_520 = MemTotal: 1056521116 kB notes_plat_sysinfo_525 = HugePages_Total: 0 notes_plat_sysinfo_530 = Hugepagesize: 2048 kB notes_plat_sysinfo_535 = notes_plat_sysinfo_540 = /usr/bin/lsb_release -d notes_plat_sysinfo_545 = Ubuntu 18.04.1 LTS notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = From /etc/*release* /etc/*version* notes_plat_sysinfo_560 = debian_version: buster/sid notes_plat_sysinfo_565 = os-release: notes_plat_sysinfo_570 = NAME="Ubuntu" notes_plat_sysinfo_575 = VERSION="18.04.1 LTS (Bionic Beaver)" notes_plat_sysinfo_580 = ID=ubuntu notes_plat_sysinfo_585 = ID_LIKE=debian notes_plat_sysinfo_590 = PRETTY_NAME="Ubuntu 18.04.1 LTS" notes_plat_sysinfo_595 = VERSION_ID="18.04" notes_plat_sysinfo_600 = HOME_URL="https://www.ubuntu.com/" notes_plat_sysinfo_605 = SUPPORT_URL="https://help.ubuntu.com/" notes_plat_sysinfo_610 = notes_plat_sysinfo_615 = uname -a: notes_plat_sysinfo_620 = Linux user-PowerEdge-R7425 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC notes_plat_sysinfo_625 = 2018 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_630 = notes_plat_sysinfo_635 = Kernel self-reported vulnerability status: notes_plat_sysinfo_640 = notes_plat_sysinfo_645 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_650 = CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization notes_plat_sysinfo_655 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB notes_plat_sysinfo_660 = notes_plat_sysinfo_665 = run-level 3 Nov 23 09:10 last=5 notes_plat_sysinfo_670 = notes_plat_sysinfo_675 = SPEC is set to: /home/cpu2017-1.0.5 notes_plat_sysinfo_680 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_685 = /dev/sda2 ext4 109G 14G 90G 13% / notes_plat_sysinfo_690 = notes_plat_sysinfo_695 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_700 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_705 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_710 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_715 = BIOS Dell Inc. 1.6.7 10/29/2018 notes_plat_sysinfo_720 = Memory: notes_plat_sysinfo_725 = 16x 80CE863280CE M386A8K40BM2-CTD 64 GB 4 rank 2666 notes_plat_sysinfo_730 = 16x Not Specified Not Specified notes_plat_sysinfo_735 = notes_plat_sysinfo_740 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7551 hw_disk = 109 GB add more disk info here hw_memory001 = 1007.577 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = ext4 sw_os001 = Ubuntu 18.04.1 LTS sw_os002 = 4.15.0-39-generic sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 657.xz_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 648.exchange2_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 620.omnetpp_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 602.gcc_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =GOMP_CPU_AFFINITY = "0,8,16,24,32,40,48,56,2,10,18,26,34,42,50,58,4,12,20,28,36,44,52,60,6,14,22,30, notes_010 =38,46,54,62,1,9,17,25,33,41,49,57,3,11,19,27,35,43,51,59,5,13,21,29,37,45,53,61,7,15,23,31,39,47,55,63" notes_015 =LD_LIBRARY_PATH = "/home/cpu2017-1.0.5/amd1806-speed-libs-revA/64:/home/cpu2017-1.0.5/amd1806-speed-libs-revA/32:" notes_020 =OMP_PROC_BIND = "true" notes_025 =OMP_STACKSIZE = "192M" notes_030 =OMP_WAIT_POLICY = "active" notes_035 = notes_plat_form_000 = BIOS settings: notes_plat_form_005 = Memory Interleaving set to Channel Interleaving notes_plat_form_010 = Virtualization Technology disabled notes_plat_form_015 = System Profile set to Custom notes_plat_form_020 = CPU Power Management set to Maximum Performance notes_plat_form_025 = Memory Frequency set to Maximum Performance notes_plat_form_030 = Turbo Boost enabled notes_plat_form_035 = C States set to Autonomous notes_plat_form_040 = Memory Patrol Scrub disabled notes_plat_form_045 = Memory Refresh Rate set to 1x notes_plat_form_050 = PCI ASPM L1 Link Power Management disabled notes_plat_form_055 = Determinism Slider set to Power Determinism