# Invocation command line: # /spec/bin/runspec --define default-platform-flags --rate 128 -c phi_int.cfg --define smt --define cores=64 --define physicalfirst --define no-numa --define THP_enabled -o all int # output_root was not used for this run ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0u2 # Operating system version: 64-Bit CeontOS 7.2 # Hardware: Intel processors supporting MIC-AVX512 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # 20160518 Intel Compiler 16.0u2 for Linux64 ############################################################################ action = validate tune = base # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160518 ext = cpu2006-1.2-ic16.0u2-lin64-dt-mic-avx512-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 flagsurl000=http://www.spec.org/cpu2006/flags/MComputers-Platform-Settings-V1.2-KNL-revA.xml flagsurl001 = http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64-revB.xml %ifdef %{default-platform-flags} %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh/:$/opt/intel/compilers_and_libraries_2016.2.181/linux/compiler/lib/intel64_lin # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OBJ = .o SMARTHEAP32_DIR = /spec/sh SMARTHEAP64_DIR = /spec/sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif default: SSE = -xMIC-AVX512 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias CXXOPTIMIZE= -auto-p32 -ansi-alias ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 437.leslie3d=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 4 \\* $SPECCOPYNUM` $command %endif %endif %endif 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 4204 test_sponsor = M Computers s.r.o. hw_avail = Sep-2016 sw_avail = Feb-2016 prepared_by = M Computers s.r.o. tester = M Computers s.r.o. hw_cpu_name = Intel Xeon Phi 7210 hw_cpu_char = Intel Turbo Boost Technology up to 1.50 GHz hw_cpu_mhz = 1300 hw_disk = 800 GB SSD hw_fpu = Integrated hw_memory000 = 192 GB (6 x 32 GB 2Rx4 PC4-2400T-R, running at hw_memory001 = 1200MHz) hw_model = MIC HD S7200AP (Intel Xeon Phi 7210, 1.30GHz) hw_ncpuorder = 1 chip hw_ncores = 64 hw_nchips = 1 hw_ncoresperchip = 64 hw_nthreadspercore = 4 hw_other = 16 GB MCDRAM hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per two cores hw_tcache = None hw_ocache = None hw_vendor = M Computers s.r.o. sw_file = ext4 sw_os000 = CentOS 7.2 sw_os001 = 3.10.0-327.18.2.el7.x86_64 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' %endif notes_015 = Binaries compiled on a system with notes_020 = 1x Intel 2nd Generation Xeon Phi CPU notes_025 = + 192GB memory using CentOS 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler000 = C/C++: Version 16.0.2.181 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} notes_030 = Transparent Huge Pages enabled with: notes_035 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 16.0.2.181 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 16.0.2.181 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/spec/libs/32:/spec/libs/64:/spec/sh/:$/opt/intel/compilers_and_libraries_2016.2.181/linux/compiler/lib/intel64_lin" notes_010 = notes_plat_000 = BIOS Configuration: notes_plat_005 = CPU and Power Performance Policy = Performance notes_plat_010 = Patrol Scrub = Disabled notes_plat_015 = Set Fan Profile = Performance notes_plat_020 = Fan PWM Offset = 100 notes_plat_025 = Cluster mode = Quadrant notes_plat_030 = Memory mode = Cache notes_plat_035 = Processor C6 = Disabled