# Invocation command line: # /home/HP_recompiled_binaries/cpu2006/bin/runspec --define default-platform-flags -c cpu2006-1.2-ic16.0-lin64-avx2-speed-20150812-E5-2699-A-v4.cfg --define cores=44 --define THP_enabled -T all -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 16.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 7.1 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 HPE Linux64 config file # 20160204 Intel Compiler 16.0 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 25Jul2016 ext = HP-cpu2006-1.2-ic16.0-lin64-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 -f use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/HP-Compiler-Flags-Intel-V1.2-HSW-revF.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/HP-Platform-Flags-Intel-V1.2-HSW-revE.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} #preENV_KMP_AFFINITY = granularity=fine,scatter preENV_KMP_AFFINITY = granularity=fine,compact %else preENV_KMP_AFFINITY = granularity=fine,compact %endif # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /home/experiment/last_test/cpu2006/sh SMARTHEAP64_DIR = /home/experiment/last_test/cpu2006/sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 #FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div #FAST = $(SSE) -ipo -O3 -no-prec-div -static FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -parallel -opt-prefetch -auto-ilp32 -complex-limited-range -qopt-prefetch-issue-excl-hint -ansi-alias CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch -fp-model fast=2 -qopt-prefetch-issue-excl-hint COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias -qopt-prefetch-issue-excl-hint -auto-ilp32 CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias -qopt-calloc ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 -static feedback=0 429.mcf=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 -complex-limited-range -static feedback=0 submit = taskset -c $SPECCOPYNUM $command 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/lib/ia32_lin PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -funroll-all-loops #basepeak=yes feedback=0 submit = taskset -c $SPECCOPYNUM $command 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: COPTIMIZE= $(FASTNOSTATIC) -static -parallel -opt-prefetch -inline-calloc -opt-malloc-options=3 -auto-p32 #basepeak=yes feedback=0 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 483.xalancbmk=peak=default: CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen:threadsafe -par-num-threads=1 PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch -fp-model fast=2 -qopt-prefetch-issue-excl-hint -funroll-all-loops feedback=0 #basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias -fp-model fast=2 -qopt-prefetch-issue-excl-hint -funroll-all-loops -nofor-main #basepeak=yes feedback=0 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias -fp-model fast=2 -qopt-prefetch-issue-excl-hint -funroll-all-loops -nofor-main #basepeak=yes feedback=0 ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = HPE hw_avail = Oct-2016 sw_avail = Dec-2015 tester = HPE hw_cpu_name = Intel Xeon E5-2699A v4 hw_cpu_char = Intel Turbo Boost Technology up to 3.60 GHz hw_cpu_mhz = 2400 hw_disk = 1 x 400 GB SAS SSD, RAID 0 hw_fpu = Integrated hw_memory = 512 GB (16 x 32 GB 2Rx4 PC4-2400T-R) hw_model000 = ProLiant DL380 Gen9 hw_model001 = (2.40 GHz, Intel Xeon E5-2699A v4) hw_ncpuorder = 1,2 chips hw_ncores = 44 hw_nchips = 2 hw_ncoresperchip = 22 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 55 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett Packard Enterprise prepared_by = HPE Performance Engineering sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 12 (x86_64) SP1, sw_os001 = Kernel 3.12.49-11-default sw_state = Run level 3 (multi-user) notes_015 = Binaries compiled on a system with 1x Intel Xeon E5 2660 v4 CPU + 128GB RAM notes_020 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled with: notes_os_010 = echo always > /sys/kernel/mm/transparent_hugepage/enabled notes_plat_000 = BIOS Configuration: notes_plat_005 = Intel Hyperthreading Option set to Disabled notes_plat_010 = Power Profile set to Balanced Power and Performance notes_plat_015 = Collaborative Power Control set to Disabled notes_plat_020 = QPI Snoop Configuration set to Home Snoop notes_plat_025 = Thermal Configuration set to Maximum Cooling notes_plat_030 = Processor Power and Utilization Monitoring set to Disabled notes_plat_035 = Memory Double Refresh Rate set to 1x Refresh notes_plat_update_000 = Regarding the sysinfo display about the memory installed, the correct amount of notes_plat_update_005 = memory is 512 GB and the dmidecode description should have one line reading as: notes_plat_update_010 = 16x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz int=default=default=default: sw_compiler001 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %ifdef %{THP_enabled} %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 16.0.0.101 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 16.0.0.101 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact" notes_010 =OMP_NUM_THREADS = "44" notes_025 =LD_LIBRARY_PATH = "/home/HP_recompiled_binaries/cpu2006/libs/32:/home/HP_recompiled_binaries/cpu2006/libs/64:/home/HP_recompiled_binaries/cpu2006/sh" # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914 -f' default: notes_plat_sysinfo_000 = Sysinfo program /home/HP_recompiled_binaries/cpu2006/config/sysinfo.rev6914 notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 notes_plat_sysinfo_010 = running on dl380-gen9-2699a Thu Oct 13 09:22:47 2016 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2699A v4 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 44 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 22 notes_plat_sysinfo_080 = siblings : 22 notes_plat_sysinfo_085 = physical 0: cores 0 2 3 4 8 10 11 12 16 17 18 19 20 21 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 2 3 4 8 10 11 12 16 17 18 19 20 21 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 56320 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 528960968 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 12 SP1 notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_160 = VERSION = 12 notes_plat_sysinfo_165 = PATCHLEVEL = 1 notes_plat_sysinfo_170 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_175 = release. notes_plat_sysinfo_180 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="SLES" notes_plat_sysinfo_195 = VERSION="12-SP1" notes_plat_sysinfo_200 = VERSION_ID="12.1" notes_plat_sysinfo_205 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP1" notes_plat_sysinfo_210 = ID="sles" notes_plat_sysinfo_215 = ANSI_COLOR="0;32" notes_plat_sysinfo_220 = CPE_NAME="cpe:/o:suse:sles:12:sp1" notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = uname -a: notes_plat_sysinfo_235 = Linux dl380-gen9-2699a 3.12.49-11-default #1 SMP Wed Nov 11 20:52:43 UTC 2015 notes_plat_sysinfo_240 = (8d714a0) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = run-level 3 Oct 13 09:14 notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = SPEC is set to: /home/HP_recompiled_binaries/cpu2006 notes_plat_sysinfo_265 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_270 = /dev/sda4 xfs 331G 93G 238G 29% /home notes_plat_sysinfo_275 = Additional information from dmidecode: notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_290 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_295 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_300 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = BIOS HP P89 09/12/2016 notes_plat_sysinfo_315 = Memory: notes_plat_sysinfo_320 = 8x UNKNOWN NOT AVAILABLE notes_plat_sysinfo_325 = 16x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz notes_plat_sysinfo_330 = notes_plat_sysinfo_335 = (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E5-2699A v4 # hw_disk = 331 GB add more disk info here # hw_memory001 = 504.456 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 2 # prepared_by = root (is never output, only tags rawfile) # sw_file = xfs # sw_os001 = SUSE Linux Enterprise Server 12 SP1 # sw_os002 = 3.12.49-11-default # sw_state = Run level 3 (add definition here)