CPU2006 license: | 3 | Test date: | Aug-2015 |
---|---|---|---|
Test sponsor: | Hewlett-Packard Company | Hardware Availability: | May-2015 |
Tested by: | Hewlett-Packard Company | Software Availability: | Mar-2015 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2620 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.20 GHz |
CPU MHz: | 2400 |
FPU: | Integrated |
CPU(s) enabled: | 6 cores, 1 chip, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 15 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 128 GB (8 x 16 GB 2Rx4 PC4-2133P-R, running at 1866 MHz) |
Disk Subsystem: | 2 x 400 GB SAS SSD RAID 10 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 7.1 (Maipo) Kernel 3.10.0-229.el7.x86_64 |
Compiler: | C/C++: Version 15.0.0.090 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 12 | 658 | 178 | 657 | 178 | 653 | 179 | 12 | 523 | 224 | 522 | 224 | 523 | 224 |
401.bzip2 | 12 | 909 | 127 | 907 | 128 | 905 | 128 | 12 | 865 | 134 | 865 | 134 | 860 | 135 |
403.gcc | 12 | 473 | 204 | 480 | 201 | 476 | 203 | 12 | 475 | 203 | 478 | 202 | 476 | 203 |
429.mcf | 12 | 311 | 352 | 313 | 350 | 313 | 350 | 12 | 311 | 352 | 313 | 350 | 313 | 350 |
445.gobmk | 12 | 762 | 165 | 762 | 165 | 760 | 166 | 12 | 746 | 169 | 758 | 166 | 746 | 169 |
456.hmmer | 12 | 305 | 367 | 306 | 366 | 312 | 359 | 12 | 272 | 412 | 271 | 413 | 271 | 413 |
458.sjeng | 12 | 819 | 177 | 833 | 174 | 819 | 177 | 12 | 796 | 182 | 804 | 181 | 805 | 180 |
462.libquantum | 12 | 95.0 | 2620 | 95.0 | 2620 | 94.9 | 2620 | 12 | 95.0 | 2620 | 95.0 | 2620 | 94.9 | 2620 |
464.h264ref | 12 | 889 | 299 | 924 | 287 | 900 | 295 | 12 | 889 | 299 | 908 | 292 | 882 | 301 |
471.omnetpp | 12 | 489 | 153 | 489 | 153 | 495 | 152 | 12 | 466 | 161 | 469 | 160 | 464 | 162 |
473.astar | 12 | 560 | 150 | 556 | 151 | 556 | 151 | 12 | 560 | 150 | 556 | 151 | 556 | 151 |
483.xalancbmk | 12 | 282 | 294 | 280 | 295 | 282 | 294 | 12 | 282 | 294 | 280 | 295 | 282 | 294 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1 > /proc/sys/vm/drop_caches
BIOS Configuration: HP Power Regulator set to HP Static High Performance Mode Thermal Configuration set to Maximum Cooling Minimum Processor Idle Power Core State set to C6 State Minimum Processor Idle Power Package State set to No Package State QPI Snoop Configuration set to Home Snoop Collaborative Power Control set to Disabled Processor Power and Utilization Monitoring set to Disabled Memory Refresh Rate set to 1x Refresh Power Profile set to Custom Sysinfo program /home/spec/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on localhost.localdomain Wed Aug 26 13:30:37 2015 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz 1 "physical id"s (chips) 12 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 6 siblings : 12 physical 0: cores 0 1 2 3 4 5 cache size : 15360 KB From /proc/meminfo MemTotal: 131734264 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.1 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.1" PRETTY_NAME="Red Hat Enterprise Linux Server 7.1 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.1:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.1 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.1 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.1:ga:server uname -a: Linux localhost.localdomain 3.10.0-229.el7.x86_64 #1 SMP Thu Jan 29 18:37:38 EST 2015 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Aug 26 12:36 SPEC is set to: /home/spec Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 318G 8.4G 310G 3% /home Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS HP U20 05/06/2015 Memory: 6x HP 752369-081 16 GB 2 rank 2133 MHz, configured at 1866 MHz 8x UNKNOWN NOT AVAILABLE 2x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2133 MHz, configured at 1866 MHz (End of data from sysinfo program) Regarding the sysinfo display about the memory installed, the correct amount of memory is 128 GB and the dmidecode description should have two lines reading as: 6x HP 752369-081 16 GB 2 rank 2133 MHz, configured at 1866 MHz 2x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2133 MHz, configured at 1866 MHz
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/spec/libs/32:/home/spec/libs/64:/home/spec/sh" Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB memory using RedHat EL 7.0
icc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 |
icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 |
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xCORE-AVX2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |