# Invocation command line:
# /home/bsc/cpu2006/bin/runspec --config=ha8k-rs440_int_rate -T all --reportable --rate --copies=16 int
# output_root was not used for this run
############################################################################
############################################################################
# SPEC CPU2006 Intel Linux64 EM64T config file
# HITACHI HA8000
# Intel Compiler 10.1 for Linux64 EM64T

action      = validate
tune        = base
ext         = cpu2006.linux64.em64t.ic101.exe
PATHSEP     = /
check_md5   = 1
reportable  = 1
mean_anyway = 1

##### Compiler section
default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o
SMARTHEAP_DIR = /home/bsc/smartheap/lib
submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command

##### Portability & libraries

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX


##### Tuning Flags
default=base=default=default:
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32/64-bit
sw_other = SmartHeap library V8.1

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -inline-calloc -opt-malloc-options=3
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div

int=peak=default=default:
COPTIMIZE=       -fast
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

400.perlbench=peak=default=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default=default:
CC= /opt/intel/cce/10.1.008/bin/icc -L/opt/intel/cce/10.1.008/lib -I/opt/intel/cce/10.1.008/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch

403.gcc=peak=default=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default=default:
COPTIMIZE= -fast -prefetch
feedback=0

445.gobmk=peak=default=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default=default:
CC= /opt/intel/cce/10.1.008/bin/icc -L/opt/intel/cce/10.1.008/lib -I/opt/intel/cce/10.1.008/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive
feedback=0

458.sjeng=peak=default=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=0
copies=1
submit=

464.h264ref=peak=default=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default=default:
basepeak=yes

#################################################################
default=default=default=default:
license_num      = 872
test_sponsor     = HITACHI
hw_avail         = Nov-2007
sw_avail         = Nov-2007
tester           = HITACHI
hw_cpu_name      = Intel Xeon X7350
hw_cpu_char      = 1066MHz system bus
hw_cpu_mhz       = 2933
hw_disk          = 2 x 73 GB 10000 rpm SAS
hw_fpu           = Integrated
hw_memory        = 64 GB(16 x 4 GB PC2-5300F CAS 5-5-5)
hw_model         = HA8000 RS440 (Intel Xeon X7350)
hw_ncpuorder     = 1, 2, 3, 4 chips
hw_ncores        = 16
hw_nchips        = 4
hw_ncoresperchip = 4
hw_nthreadspercore = 1
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache        = None
hw_ocache        = None
hw_vendor        = HITACHI
prepared_by      = HITACHI
sw_file          = ext3
sw_os000         = Red Hat Enterprise Linux
sw_os001         = Server release 5.1 (Tikanga)
sw_os002         = Kernel 2.6.18-53.el5 on an x86_64
sw_state         = Multi-user run level 3

int=default=default=default:
sw_compiler000   = Intel C++ Compiler 10.1 for Linux
sw_compiler001   =   Build 20070913 Package ID: l_cc_p_10.1.008




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic10.1-INT-ia32-linux-flags.20090714.02.xml
notes_plat_000 =BIOS Settings:
notes_plat_005 =Hardware Prefetcher = Disabled
notes_plat_010 =Adjacent Cache Line Prefetch = Disabled
notes_os_000 ='/bin/taskset' used to bind processes to CPUs
notes_os_005 =OMP_NUM_THREADS set to number of cores
notes_os_010 =KMP_AFFINITY set to physical,0