# Invocation command line:
# /home/SPEC2006v1_0/bin/runspec -n 3 -c GCC43-Linux64-amd-srcalt -F linux64-gcc_flags.xml -r -C 16 -T base all
# output_root was not used for this run
############################################################################
# AMD64 SuSE Linux 10.0, 64-bit OS
# GCC 4.3 compiler, 64-bit compiler
# CPU2006 kit-1.0, generate 64-bit binary
# Config file for CPU2006
#####################################################################
action = validate
output_format	= asc,config
ext         = gcc43_gh_new_srcalt.exe
tune		= base,peak
PATHSEP		= /
check_md5	= 1
reportable	= 1
iterations	= 3
ignore_errors	= 0
teeout		= 1
teerunout	= 1
minimize_builddirs = 0
minimize_rundirs= 0

bind0         = numactl -m 0 --physcpubind=0
bind1         = numactl -m 0 --physcpubind=1
bind2         = numactl -m 0 --physcpubind=2
bind3         = numactl -m 0 --physcpubind=3
bind4         = numactl -m 1 --physcpubind=4
bind5         = numactl -m 1 --physcpubind=5
bind6         = numactl -m 1 --physcpubind=6
bind7         = numactl -m 1 --physcpubind=7
bind8         = numactl -m 2 --physcpubind=8
bind9         = numactl -m 2 --physcpubind=9
bind10         = numactl -m 2 --physcpubind=10
bind11         = numactl -m 2 --physcpubind=11
bind12         = numactl -m 3 --physcpubind=12
bind13         = numactl -m 3 --physcpubind=13
bind14         = numactl -m 3 --physcpubind=14
bind15         = numactl -m 3 --physcpubind=15

submit       = echo "$command" > run.sh ; $BIND sh run.sh
#include: linux64-gcc_sut.cfg
#  ----- Begin inclusion of 'linux64-gcc_sut.cfg'
############################################################################

############################ Hardware Info ###########################
default=default=default=default:
hw_avail     	   = Apr-2008
hw_cpu_name        = AMD Opteron 8356
hw_cpu_char        = 
hw_cpu_mhz         = 2300
hw_fpu             = Integrated
hw_nchips          = 4
hw_ncores          = 16
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
hw_ncpuorder       = 2,4 chips
hw_pcache          = 64 KB I + 64 KB D on chip per core
hw_scache          = 512 KB I+D on chip per core
hw_tcache          = 2 MB I+D on chip per chip
hw_ocache          = None
hw_vendor          = Tyan
hw_model           = Transport TX46, AMD Opteron 8356
hw_disk            = 1 x 250 GB SATA, 7200 RPM
hw_memory          = 32 GB (16 x 2GB, DDR2-667 CL5 ECC Reg Dual Rank)
hw_other           = None
license_num	   = 49
test_date	   = Apr-2008
test_sponsor	   = Advanced Micro Devices
tester		   = Advanced Micro Devices
prepared_by        = AMD Performance Labs
## SW config
sw_os000           = SuSE Linux Enterprise Server 10 (x86_64) SP1,
sw_os001 = Kernel 2.6.16.46-0.12-smp
sw_file            = ext3
sw_compiler        = gcc, g++, gfortran 4.3.0
sw_base_ptrsize    = 64-bit
sw_avail           = Mar-2008
sw_auto_parallel   = No
sw_other           = None
sw_peak_ptrsize    = Not Applicable
sw_state           = Runlevel 3 (Full multiuser with network)





# ---- End inclusion of '/home/SPEC2006v1_0/config/linux64-gcc_sut.cfg'

use_submit_for_speed	= 1

default=default=default=default:
#####################################################################
#
# Compiler selection
#
#####################################################################

CC           = gcc
CXX          = g++
FC           = gfortran

#####################################################################
# base flags for 64bit
#####################################################################
# Base is low opt
default=base=default:
COPTIMIZE	= -O3 -funroll-loops -fno-strict-aliasing
CXXOPTIMIZE	= $[COPTIMIZE]
FOPTIMIZE	= $[COPTIMIZE]

#####################################################################
# Portability
#####################################################################

default=base=default=default:
PORTABILITY = -DSPEC_CPU_LP64

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

# Explicitly include header file <cstring>
447.dealII=default=default=default:
srcalt = explicit_inclusion_of_cstring

450.soplex=default=default:
PORTABILITY = -DSPEC_CPU_LP64 

462.libquantum=default=default=default:
CPORTABILITY=  -DSPEC_CPU_LINUX

481.wrf=default=default=default:
CPORTABILITY=-DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG

# Explicitly include header file <cstring>
483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX
srcalt = explicit_inclusion_of_cstring




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090713.05.xml
notes_os_000 = 'numactl' was used to bind copies to the cores.