# Invocation command line: # /home/cpu2006/bin/runspec -a validate -c 120li_ic91.cfg -F config/NEC-ic91-linux-flags-20070717.xml -T all -o all -r 8 fp # output_root was not used for this run ############################################################################ ###################################################### # SPEC CPU2006 Intel SLES10 x64 (64-bit) config file # # Mar 27 2007 Intel Compiler 9.1 for Linux Intel64 # ###################################################### action = validate tune = all ext = 120li PATHSEP = / check_md5 = 1 mean_anyway = 1 reportable = 1 ############################################################################ # File to be included into config file for SPEC CPU2006 # This include file specifies the "System Under Test" (Hardware, # OS, BIOS, etc.) # Any information about the binaries is elsewhere. # To avoid conflicts in the numbering of the notes, # please use only 900 and higher numbers. ####################################################################### # System information # # If some remarks about BIOS or Firmware are needed, place them here. # ####################################################################### default=default=default=default: notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_os_005= '/usr/bin/taskset' used to bind processes to CPUs notes_000= notes_005= The system bus runs at 1333 MHz int=default=default=default: notes_015= All binaries were built with 32-bit Intel compiler except: notes_020= 401.bzip2, 456.hmmer and 462.libquantum in peak were built with notes_025= 64-bit Intel compiler by changing the path for include and library files. fp=default=default=default: notes_010= All binaries were built with 64-bit Intel compiler except: notes_015= 433.milc, 434.zeusmp, 450.soplex, 470.lbm and 482.sphinx3 in peak were built with notes_020= 32-bit Intel compiler by changing the path for include and library files. notes_025 = ##################################### # Description Hardware and Software # ##################################### default=default=default=default: hw_vendor = NEC Corporation hw_model000 = Express5800/120Li hw_model001 = (Intel Xeon processor E5345) hw_cpu_name = Intel Xeon E5345 hw_cpu_char = 2.33 GHz, 2x4 MB L2 shared, 1333 MHz bus hw_cpu_mhz = 2333 hw_fpu = Integrated # hw_nchips = 2 hw_ncores = 8 hw_ncoresperchip = 4 hw_nthreadspercore = 1 # hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 8 MB I+D on chip per chip, 4 MB shared / 2 cores hw_tcache = None hw_ocache = None hw_memory = 16 GB (8x2 GB PC2-5300F, 2 rank, CL5-5-5, ECC) hw_disk = 1x73.2 GB SAS, 15000RPM hw_other = None sw_file = ext2 sw_state = Multiuser, Runlevel 3 license_num = 9006 test_sponsor = NEC Corporation tester = NEC Corporation test_date = Oct-2007 hw_avail = Jan-2007 prepared_by = NEC Corporation config = default=default=default=default: CC = icc CXX = icpc FC = ifort OBJ = .o SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib submit= taskset -c $SPECCOPYNUM $command ########################### # portability & libraries # ########################### fp=default=default=default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default=default=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 462.libquantum=default=default=default: CPORTABILITY = -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY = -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ######################### # Baseline Tuning Flags # ######################### int=base=default=default: COPTIMIZE= -fast CXXOPTIMIZE= -xP -O3 -ipo -no-prec-div EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap fp=base=default=default: OPTIMIZE= -fast ##################### # Peak Tuning Flags # ##################### int=peak=default=default: OPTIMIZE= -fast EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap PASS1_CFLAGS = -prof_gen PASS2_CFLAGS = -prof_use PASS1_CXXFLAGS = -prof_gen PASS2_CXXFLAGS = -prof_use PASS1_LDFLAGS = -prof_gen PASS2_LDFLAGS = -prof_use fp=peak=default=default: OPTIMIZE= -fast PASS1_CFLAGS = -prof_gen PASS2_CFLAGS = -prof_use PASS1_FFLAGS = -prof_gen PASS2_FFLAGS = -prof_use PASS1_CXXFLAGS = -prof_gen PASS2_CXXFLAGS = -prof_use PASS1_LDFLAGS = -prof_gen PASS2_LDFLAGS = -prof_use 400.perlbench=peak=default=default: EXTRA_LIBS= 401.bzip2=peak=default=default: CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib PORTABILITY=-DSPEC_CPU_LP64 EXTRA_LIBS= feedback=0 403.gcc=peak=default=default: basepeak=yes 456.hmmer=peak=default=default: CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib PORTABILITY=-DSPEC_CPU_LP64 EXTRA_LIBS= 462.libquantum=peak=default=default: CC=/opt/intel/cce/9.1.049/bin/icc -I/opt/intel/cce/9.1.049/include -L/opt/intel/cce/9.1.049/lib PORTABILITY=-DSPEC_CPU_LP64 EXTRA_LIBS= 471.omnetpp=peak=default=default: OPTIMIZE=-xP -O3 -ipo -no-prec-div 483.xalancbmk=peak=default=default: basepeak=yes 410.bwaves=peak=default=default: basepeak=yes 416.gamess=peak=default=default: basepeak=yes 433.milc=peak=default=default: PORTABILITY= CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib 434.zeusmp=peak=default=default: PORTABILITY= FC=/opt/intel/fc/9.1.045/bin/ifort -I/opt/intel/fc/9.1.045/include -L/opt/intel/fc/9.1.045/lib feedback=0 436.cactusADM=peak=default=default: basepeak=yes 437.leslie3d=peak=default=default: basepeak=yes 444.namd=peak=default=default: basepeak=yes 450.soplex=peak=default=default: PORTABILITY= CXX=/opt/intel/cc/9.1.049/bin/icpc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib 459.GemsFDTD=peak=default=default: basepeak=yes 470.lbm=peak=default=default: PORTABILITY= CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib 481.wrf=peak=default=default: basepeak=yes 482.sphinx3=peak=default=default: PORTABILITY= CC=/opt/intel/cc/9.1.049/bin/icc -I/opt/intel/cc/9.1.049/include -L/opt/intel/cc/9.1.049/lib feedback=0 ######################### # Used Compilers and OS # ######################### int=default=default=default: sw_compiler000 = Intel C++ Compiler for IA32/EM64T application, sw_compiler001 = Version 9.1 - Build 20070215, Package-ID: sw_compiler002 = l_cc_p_9.1.049 sw_other = Smart Heap Library, Version 8.1 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit fp=default=default=default: sw_compiler000 = Intel C++ Compiler for IA32/EM64T application, sw_compiler001 = Version 9.1 - Build 20070320, Package-ID: sw_compiler002 = l_cc_c_9.1.049 sw_compiler003 = Intel Fortran Compiler for IA32/EM64T application, sw_compiler004 = Version 9.1 - Build 20070320, Package ID: sw_compiler005 = l_fc_c_9.1.045 sw_other = None sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit default=default=default=default: sw_os000 = 64-Bit SUSE LINUX Enterprise Server 10, Kernel sw_os001 = 2.6.16.21-0.8-smp on an x86_64 sw_avail = Apr-2007 sw_auto_parallel = No ############################################################################ # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000= http://www.spec.org/cpu2006/flags/NEC-ic91-linux-flags.xml