CPU2006 license: | 6 | Test date: | May-2007 |
---|---|---|---|
Test sponsor: | Sun Microsystems | Hardware Availability: | Jun-2007 |
Tested by: | Sun Microsystems | Software Availability: | Jul-2007 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 2222 SE |
CPU Characteristics: | |
CPU MHz: | 3000 |
FPU: | Integrated |
CPU(s) enabled: | 4 cores, 2 chips, 2 cores/chip |
CPU(s) orderable: | 1-2 (order by number of chips) |
Primary Cache: | 64 KB I + 64 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
L3 Cache: | None |
Other Cache: | None |
Memory: | 32 GB (8x4GB, DDR2-667 CL5 ECC Registered SDRAM) |
Disk Subsystem: | SATA, 160 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Solaris 10 11/06 |
Compiler: | Sun Studio 12 |
Auto Parallel: | No |
File System: | ufs |
System State: | Multiuser, Runlevel 3 |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | MicroQuill SmartHeap Library v7.4 |
Benchmark | Base | Peak | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||
400.perlbench | 681 | 14.3 | 675 | 14.5 | 675 | 14.5 | 578 | 16.9 | 578 | 16.9 | 577 | 16.9 |
401.bzip2 | 903 | 10.7 | 906 | 10.6 | 909 | 10.6 | 840 | 11.5 | 841 | 11.5 | 838 | 11.5 |
403.gcc | 741 | 10.9 | 744 | 10.8 | 746 | 10.8 | 636 | 12.7 | 639 | 12.6 | 635 | 12.7 |
429.mcf | 1010 | 9.03 | 1011 | 9.02 | 1001 | 9.11 | 569 | 16.0 | 571 | 16.0 | 572 | 15.9 |
445.gobmk | 669 | 15.7 | 669 | 15.7 | 667 | 15.7 | 569 | 18.4 | 569 | 18.4 | 569 | 18.4 |
456.hmmer | 515 | 18.1 | 513 | 18.2 | 514 | 18.2 | 515 | 18.1 | 513 | 18.2 | 514 | 18.2 |
458.sjeng | 838 | 14.4 | 840 | 14.4 | 839 | 14.4 | 797 | 15.2 | 796 | 15.2 | 795 | 15.2 |
462.libquantum | 563 | 36.8 | 554 | 37.4 | 554 | 37.4 | 563 | 36.8 | 554 | 37.4 | 554 | 37.4 |
464.h264ref | 1170 | 18.9 | 1178 | 18.8 | 1170 | 18.9 | 1120 | 19.8 | 1128 | 19.6 | 1120 | 19.8 |
471.omnetpp | 717 | 8.72 | 717 | 8.72 | 716 | 8.73 | 589 | 10.6 | 590 | 10.6 | 590 | 10.6 |
473.astar | 689 | 10.2 | 688 | 10.2 | 691 | 10.2 | 653 | 10.7 | 653 | 10.7 | 652 | 10.8 |
483.xalancbmk | 571 | 12.1 | 575 | 12.0 | 580 | 11.9 | 384 | 18.0 | 382 | 18.0 | 384 | 18.0 |
ulimit -s unlimited (shell): increases stack
Default BIOS settings were used.
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
464.h264ref: | -DSPEC_CPU_LP64 |
471.omnetpp: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
-fast -xipo=2 -xarch=sse2a -m64 |
-fast -xipo=2 -xarch=sse2a -m64 -library=stlport4 |
400.perlbench: | -DSPEC_CPU_SOLARIS_X64 |
403.gcc: | -DSPEC_CPU_SOLARIS |
456.hmmer: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
483.xalancbmk: | -DSPEC_CPU_SOLARIS |