# Invocation command line:
# E:\cpu2006\bin\runspec -c cpu2006.1.0.ic91.win-x64.intel.Jan102007 -T all --input ref -n 3 --rate 8 -o all int
# output_root was not used for this run
############################################################################
###############################################################
# SPEC CPU2006 Intel Windows Server 2003 (32 bit) config file #
# Jan 10 2007 Intel Compiler 9.1 Microsoft Visual Studio 2005 #
###############################################################

action   = validate
tune     = base or peak
ext      = cpu2006.1.0.ic91.win32.intel.Jan102007
PATHSEP  =	/
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.09.xml

check_md5   = 1
mean_anyway = 1
reportable  = 1

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

#######################################################################
# System information                                                  #
# If some remarks about BIOS or Firmware are needed, place them here. #
####################################################################### 

default=default=default=default:
notes_000=
notes_005= The system bus runs at 1333 MHz
notes_010=
notes_015= BIOS configuration:
notes_020= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable

###################################
# About Fujitsu Siemens Computers #
###################################

default=default=default=default:
notes_025=
notes_030= This result was measured on the PRIMERGY RX300 S3. The PRIMERGY RX300 S3 and
notes_035= the PRIMERGY TX300 S3 are electronically equivalent.
notes_040 = For information about Fujitsu Siemens Computers in your country please see:
notes_045 = http://www.fujitsu-siemens.com/countries

#####################################
# Description Hardware and Software #
#####################################

default=default=default=default:
hw_vendor          = Fujitsu Siemens Computers
hw_model000        = PRIMERGY TX300 S3, Intel Xeon processor X5355,
hw_model001 = 2.66 GHz
hw_cpu_name        = Intel Xeon X5355
hw_cpu_char        = X5355
hw_cpu_mhz         = 2667
hw_fpu             = Integrated
#
hw_nchips          = 2
hw_ncores          = 8
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
#
hw_ncpuorder       = 1,2 chips
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache          = None
hw_ocache          = None
hw_memory000       = 16 GB (8x2 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5,
hw_memory001 = with ECC)
hw_disk            = SAS (73GB 15400 rpm)
hw_other           = None

sw_file            = NTFS
sw_state           = Default

license_num        = 22
test_sponsor       = Fujitsu Siemens Computers
tester             = Fujitsu Siemens Computers
test_date          = Feb-2007
hw_avail           = Jan-2007
prepared_by        = Fujitsu Siemens Computers
config             = cpu2006.1.0.ic91.win-x64.intel.Jan102007.cfg
# ---- End inclusion of 'E:/cpu2006/config/SUT.inc'

####################
# Compiler section #
####################

default=default=default=default:
CC  = icl -Qvc8 -Qc99 
CXX = icl -Qvc8
OBJ = .obj

int=default=default=default:
EXTRA_LDFLAGS = -F512000000
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

###########################
# portability & libraries #
###########################

400.perlbench=default=default=default:
CPORTABILITY  = -DSPEC_CPU_NO_NEED_VA_COPY

403.gcc=default=default=default:
CPORTABILITY = -DSPEC_CPU_WIN32 
EXTRA_CFLAGS = -Dalloca=_alloca 

464.h264ref=default=default=default:
CPORTABILITY = -DWIN32 -DSPEC_CPU_NO_INTTYPES  

483.xalancbmk=default=default=default:
CXXPORTABILITY = -Qoption,cpp,--no_wchar_t_keyword

#########################
# Baseline Tuning Flags #
#########################

default=base=default=default:
OPTIMIZE = -fast
CXXOPTIMIZE = -fast -Qcxx-features
EXTRA_LIBS = shlW32M.lib

#####################
# Peak Tuning Flags #
#####################

default=peak=default=default:
OPTIMIZE = -fast
CXXOPTIMIZE = -fast -Qcxx-features
EXTRA_LIBS = shlW32M.lib

PASS1_CFLAGS   = -Qprof_gen
PASS2_CFLAGS   = -Qprof_use
PASS1_CXXFLAGS = -Qprof_gen
PASS2_CXXFLAGS = -Qprof_use
PASS1_LDFLAGS  = -Qprof_gen
PASS2_LDFLAGS  = -Qprof_use

403.gcc=peak=default=default:
EXTRA_LIBS = 

429.mcf=peak=default=default:
basepeak=yes

473.astar=peak=default=default:
basepeak=yes

#########################
# Used Compilers and OS #
#########################

int=default=default=default:
sw_compiler000   = Intel C++ Compiler for IA32 version 9.1
sw_compiler001   = - Build 20061103Z, Package-ID W_CC_C_9.1.033
sw_compiler002   = Microsoft Visual Studio 2005 (libr. & linker)

default=default=default=default:
sw_other         = Smart Heap Library, Version 8
sw_os000         = Windows Server 2003 x64 Enterprise Edition + SP1
sw_os001 = (64-bit)
sw_avail         = Nov-2006

sw_auto_parallel = No
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32-bit

###################
# END config file #
###################