SPEC® CFP2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Hewlett-Packard Company

HP Integrity rx2660
(1.6GHz/18MB Dual-Core Intel Itanium 2)

SPECfp®2006 = 17.8

CPU2006 license: 03 Test date: Dec-2006
Test sponsor: Hewlett-Packard Company Hardware Availability: Feb-2007
Tested by: Hewlett-Packard Company Software Availability: Feb-2007
Benchmark results graph
Hardware
CPU Name: Dual-Core Intel Itanium 2 9040
CPU Characteristics: 1.6GHz/18MB, 533MHz FSB
CPU MHz: 1600
FPU: Integrated
CPU(s) enabled: 2 cores, 1 chip, 2 cores/chip
CPU(s) orderable: 1-2 chips
Primary Cache: 16 KB I + 16 KB D on chip per core
Secondary Cache: 1 MB I + 256 KB D on chip per core
L3 Cache: 9 MB I+D on chip per core
Other Cache: None
Memory: 8 GB (4x2GB DIMMs)
Disk Subsystem: 73GB 10K RPM SAS
Other Hardware: None
Software
Operating System: HPUX11i-TCOE B.11.23.0609
Compiler: HP C/aC++ Developer's Bundle C.11.23.12
HP Fortran90 Compiler B.11.23.32
Auto Parallel: No
File System: vxfs
System State: Multi-user
Base Pointers: 32-bit
Peak Pointers: 32-bit
Other Software: None

Results Table

Benchmark Base Peak
Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves 350 38.8  350 38.8  350 38.8  350 38.8  350 38.8  350 38.8 
416.gamess 2244 8.73 2245 8.72 2244 8.73 2143 9.14 2142 9.14 2143 9.14
433.milc 536 17.1  536 17.1  536 17.1  484 19.0  483 19.0  484 19.0 
434.zeusmp 518 17.6  519 17.5  519 17.6  518 17.6  519 17.5  519 17.6 
435.gromacs 516 13.8  516 13.8  516 13.8  455 15.7  456 15.7  456 15.7 
436.cactusADM 365 32.8  364 32.8  364 32.8  365 32.8  364 32.8  364 32.8 
437.leslie3d 456 20.6  456 20.6  456 20.6  456 20.6  456 20.6  456 20.6 
444.namd 304 26.4  304 26.4  304 26.4  304 26.4  304 26.4  304 26.4 
447.dealII 552 20.7  552 20.7  552 20.7  552 20.7  552 20.7  552 20.7 
450.soplex 944 8.84 943 8.85 943 8.85 811 10.3  812 10.3  811 10.3 
453.povray 593 8.97 594 8.96 594 8.96 487 10.9  486 10.9  487 10.9 
454.calculix 575 14.3  575 14.3  575 14.3  575 14.3  575 14.3  575 14.3 
459.GemsFDTD 697 15.2  697 15.2  697 15.2  640 16.6  640 16.6  639 16.6 
465.tonto 1023 9.62 1023 9.61 1023 9.62 982 10.0  981 10.0  982 10.0 
470.lbm 435 31.6  435 31.6  435 31.6  435 31.6  435 31.6  435 31.6 
481.wrf 712 15.7  712 15.7  712 15.7  712 15.7  712 15.7  712 15.7 
482.sphinx3 1036 18.8  1036 18.8  1036 18.8  998 19.5  1001 19.5  1000 19.5 

Operating System Notes

   The system had the September 2006 HP-UX 11i v2 Technical Computing
   Operating Environment (TCOE) and compilers installed, along with
   the following patches:

   PHSS_34858  linker + fdp cumulative patch
   PHSS_34853  Math Library Cumulative Patch
   PHSS_34854  Integrity Unwind Library
   PHSS_34855  HP C Compiler (A.06.12)
   PHSS_34856  aC++ Compiler (A.06.12)
   PHSS_34857  u2comp/be/plugin library patch
   PHSS_34395  FORTRAN I/O Library [libIO77]
   PHSS_34397  FORTRAN Intrinsics [libF90 B.11.23.17]
   PHSS_34399  Fortran Product Patch, v3.1 to v3.1.1
   PHKL_34020  Perfmon enhancements and Itanium Dual-Core

   The following kernel tunables were set, in addition to the defaults
   set by the Technical Computing OE:

   dbc_max_pct=20
   dbc_min_pct=20
   maxdsiz=3221225472
   maxssiz=401604608

Platform Notes

 The "cpuconfig" EFI command was used prior to booting
   to deconfigure processors.

 Although two cores were enabled during testing,
   the SPEC CPU2006 benchmarks used only one core.

Base Compiler Invocation

C benchmarks:

 /opt/ansic/bin/cc -Ae 

C++ benchmarks:

 /opt/aCC/bin/aCC -Aa 

Fortran benchmarks:

 /opt/fortran90/bin/f90 

Benchmarks using both Fortran and C:

 /opt/ansic/bin/cc -Ae   /opt/fortran90/bin/f90 

Base Portability Flags

453.povray:  -DSPEC_CPU_NEED_INVHYP 
454.calculix:  -DSPEC_CPU_NOZMODIFIER 
481.wrf:  -DNOUNDERSCORE   +noppu 

Base Optimization Flags

C benchmarks:

 +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   -Wl,-N 

C++ benchmarks:

 +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   -Wl,-N 

Fortran benchmarks:

 +Ofaster   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   -Wl,-N 

Benchmarks using both Fortran and C:

 +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   -Wl,-N 

Peak Compiler Invocation

C benchmarks:

 /opt/ansic/bin/cc -Ae 

C++ benchmarks:

 /opt/aCC/bin/aCC -Aa 

Fortran benchmarks:

 /opt/fortran90/bin/f90 

Benchmarks using both Fortran and C:

 /opt/ansic/bin/cc -Ae   /opt/fortran90/bin/f90 

Peak Portability Flags

453.povray:  -DSPEC_CPU_NEED_INVHYP 
454.calculix:  -DSPEC_CPU_NOZMODIFIER 
481.wrf:  -DNOUNDERSCORE   +noppu 

Peak Optimization Flags

C benchmarks:

433.milc:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Onoparmsoverlap   -Wl,-N 
470.lbm:  basepeak = yes 
482.sphinx3:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Onoparmsoverlap 

C++ benchmarks:

444.namd:  basepeak = yes 
447.dealII:  basepeak = yes 
450.soplex:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Onoparmsoverlap   -Wl,-N 
453.povray:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M 

Fortran benchmarks:

410.bwaves:  basepeak = yes 
416.gamess:  +Ofaster   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Odataprefetch=direct   -Wl,-N 
434.zeusmp:  basepeak = yes 
437.leslie3d:  basepeak = yes 
459.GemsFDTD:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Odataprefetch=direct   -Wl,-N 
465.tonto:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Odataprefetch=direct 

Benchmarks using both Fortran and C:

435.gromacs:  +Oprofile=collect:all(pass 1)   +Oprofile=use(pass 2)   +Ofaster   +Otype_safety=ansi   -Wl,-a,archive_shared   -Wl,+pd,64M   -Wl,+pi,64M   +Onoparmsoverlap 
436.cactusADM:  basepeak = yes 
454.calculix:  basepeak = yes 
481.wrf:  basepeak = yes 

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.07.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.07.xml.