# Invocation command line:
# /SLES10/home/mpaton/s2k6/bin/runspec -r -C 4 -F gcc.xml int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       [gcc, 4.1 release ]
#      Operating system version:    [SLES9 SP3 for AMD64]
#      Hardware:                    [Opteron]
#
# If your platform uses different versions, different
# hardware or operates in a different mode (for
# example, 32- vs. 64-bit mode), there is the possibiliy
# that this configuration file may not work as-is.
#
# Note that issues with compilation should be directed
# to the compiler vendor. Information about SPEC techncial
# support can be found in the techsupport document in the
# Docs directory of your benchmark installation.
#
# Also note that this is a sample configuration. It
# is expected to work for the environment in which
# it was tested; it is not guaranteed that this is
# the config file that will provide the best performance.
#
# Note that you might find a more recent config file for
# your platform with the posted results at
# www.spec.org/cpu2006
####################################################################
# AMD64 (64-bit) FSF's gcc 4.1 config file 
# Config file for CPU2006 int base only
#####################################################################

ignore_errors = yes
tune          = base
ext           = amd64-m64-gcc41-913
output_format = asc
reportable    = 1
teeout        = yes
teerunout     = yes
hw_avail      = Jul-2006
sw_avail      = Jul-2006
sw_base_ptrsize = 64-bit
license_num   = 49
tester = Advanced Micro Devices
prepared_by   = AMD Austin, TX
sw_auto_parallel = No
test_date     = Apr-2006
test_sponsor = Advanced Micro Devices
hw_nthreadspercore = 1

default=default=default=default:
#####################################################################
#
# Compiler selection
#
#####################################################################

CC            = gcc
CXX           = g++
FC            = gfortran

## HW config
## Proc
hw_cpu_name   = Intel Xeon 5160
hw_cpu_char = 3.0GHz 1333MHz System Bus
hw_cpu_mhz    = 3000
hw_fpu        = Integrated
hw_nchips     = 2
hw_ncores     = 4
hw_ncoresperchip = 2
hw_pcache     = 32 KB I + 32 KB D on chip per core
hw_scache     = 4 MB I+D on chip per chip
hw_tcache = None

## System
hw_model      = Supermicro X7DBE (Intel Xeon 5160)
hw_ncpuorder  = 1,2 chips
hw_disk       = 250GB SATA
hw_memory     = 8 GB (8 x 1 GB DDR2-667 CL5 ECC FB)
hw_ocache     = None
hw_other      = None
hw_vendor     = Supermicro

## SW config
sw_os         = SUSE Linux 10.1 (for x86_64)
sw_other = None
sw_peak_ptrsize = Not Applicable
sw_file       = ext3
sw_state      = runlevel 3
submit        = /usr/bin/taskset -c $SPECUSERNUM $command
sw_compiler   = SUSE gcc, g++ 4.1 (for x86_64)

#####################################################################
# Optimization
#####################################################################

## Base is low opt
default=base=default=default:
COPTIMIZE    = -O3 -fno-inline-functions -funroll-loops
CXXOPTIMIZE  = -O3 -funroll-loops

#####################################################################
# 32/64 bit Portability Flags - all
#####################################################################

default=base=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# Portability Flags - INT
#####################################################################

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default=default:
CPORTABILITY=  -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

notes_000  = The system can be assembled using an SSI EEB form-factor case,
notes_005 = and a Zippy/Emacs 700 watt PSL-6701P Power Supply.
notes_010 =Other Configuration Notes
notes_015 = Taskset utility used to bind process to cores




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.04.xml