dell.ic11.0.windows.flags
SPEC CPU2006 Flag Description for the Intel(R) Compiler 11.0 on Windows
for IA32 and Intel 64 Applications
Platform settings
One or more of the following settings may have been set. Please see the Notes section of the
report to determine which, if any, have been modified.
Adjacent Cache Line Prefetch:
This BIOS option allows the enabling/disabling of a processor mechanism to
fetch the adjacent cache line within an 128-byte sector that contains
the data needed due to a cache line miss.
In some limited cases, setting this option from the Default may improve
performance. In the majority of cases, the default setting
provides better performance. Users should modify this option
after performing application benchmarking to verify improved
performance in their environment.
Hardware Prefetch:
This BIOS option allows allows the enabling/disabling of a processor
mechanism to prefetch data into the cache according to a pattern
recognition algorithm.
In some limited cases, setting this option to Disabled may improve
performance. In the majority of cases, the option set to Enabled
provides better performance. Users should only disable this option
after performing application benchmarking to verify improved
performance in their environment.
]]>
Invoke the Intel C++ compiler
]]>
Invoke the Intel Fortran compiler
Tells the compiler to conform to the ISO/IEC 9899:1999 International Standard.
Default:
When the compiler is installed, it detects which version of Visual Studio
is on your system. Qvc defaults to the form of the option that is compatible
with that version. When multiple versions of Visual Studio are installed the
compiler installation lets you select which version you want to use.
This option specifies compatibility with Visual C++ or Visual Studio.
QVC7.1 - Microsoft Visual Studio .NET 2003
QVC8 - Microsoft Visual Studio 2005
QVC9 - Microsoft Visual Studio 2008
]]>
Enable complex math routines when using Microsoft Visual Studio 2005.
]]>
Tell the compiler not to use the internal VA_COPY which is not needed when using
Microsoft Visual Studio 2005
]]>
Compile the source for the Intel compiler on Windows.
]]>
Pass the command to the C/C++ pre-processor.
]]>
For mixed-language benchmarks, tell the compiler to convert routine names to
lowercase for compatibility
]]>
Tell the compiler to assume that routine names end with an underscore
]]>
Tell the compiler to treat source files as C++ regardless of the file extension
Determines the version of the architecture for which the compiler generates instructions.
Possible values for architecture are:
SSE Optimizes for Intel Pentium 4 processors with Streaming SIMD Extensions (SSE).
SSE2 Optimizes for Intel Pentium 4 processors with Streaming SIMD Extensions 2 (SSE2).
Default:
OFF No processor specific code is generatd by the compiler.
]]>
Enables optimizations for speed and disables some optimizations that
increase code size and affect speed.
To limit code size, this option:
- Enables global optimization; this includes data-flow analysis,
code motion, strength reduction and test replacement, split-lifetime
analysis, and instruction scheduling.
- Disables intrinsic recognition and intrinsics inlining.
The O1 option may improve performance for applications with very large
code size, many branches, and execution time not dominated by code within loops.
On IA-32 Windows platforms, -O1 sets the following:
/Qunroll0, /Oi-, /Op-, /Oy, /Gy, /Os, /GF (/Qvc7 and above),
/Gf (/Qvc6 and below), /Ob2, and /Og
]]>
Enables optimizations for speed. This is the generally recommended
optimization level. This option also enables:
- Inlining of intrinsics
- Intra-file interprocedural optimizations, which include:
- inlining
- constant propagation
- forward substitution
- routine attribute propagation
- variable address-taken analysis
- dead static function elimination
- removal of unreferenced variables
- The following capabilities for performance gain:
- constant propagation
- copy propagation
- dead-code elimination
- global register allocation
- global instruction scheduling and control speculation
- loop unrolling
- optimized code selection
- partial redundancy elimination
- strength reduction/induction variable simplification
- variable renaming
- exception handling optimizations
- tail recursions
- peephole optimizations
- structure assignment lowering and optimizations
- dead store elimination
On IA-32 Windows platforms, -O2 sets the following:
/Og, /Oi-, /Os, /Oy, /Ob2, /GF (/Qvc7 and above), /Gf (/Qvc6
and below), /Gs, and /Gy.
]]>
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On IA-32 and Intel EM64T processors, when O3 is used with options
-ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler
performs more aggressive data dependency analysis than for O2, which
may result in longer compilation times.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets. On IA-32
Windows platforms, -O3 sets the following:
/GF (/Qvc7 and above), /Gf (/Qvc6 and below), and /Ob2
]]>
This option tells the compiler to assume that the program adheres to
ISO C Standard aliasability rules.
If your program adheres to these rules, then this option allows the compiler
to optimize more aggressively. If it doesn't adhere to these rules, then
it can cause the compiler to generate incorrect code.
]]>
This option instructs the compiler to analyze and transform the program so that
64-bit pointers are shrunk to 32-bit pointers, and 64-bit longs (on Linux) are
shrunk into 32-bit longs wherever it is legal and safe to do so. In order for
this option to be effective the compiler must be able to optimize using the
-ipo/-Qipo option and must be able to analyze all library/external calls the
program makes.
This option requires that the size of the program executable never exceeds 2**32 bytes
and all data values can be represented within 32 bits. If the program can run
correctly in a 32-bit system, these requirements are implicitly satisfied. If
the program violates these size restrictions, unpredictable behavior might occur.
This option places local variables, except those declared as SAVE, to the run-time stack.
It is as if the variables were declared with the AUTOMATIC attribute.
It does not affect variables that have the SAVE attribute or ALLOCATABLE attribute,
or variables that appear in an EQUIVALENCE statement or in a common block.
This option may provide a performance gain for your program, but if your program depends
on variables having the same value as the last time the routine was invoked, your program
may not function properly.
If you want to cause variables to be placed in static memory, specify /Qsave (Windows).
]]>
Enable C++ Exception Handling and RTTI
This option has the same effect as specifying /GX /GR.
]]>
This option enables additional interprocedural optimizations for single
file compilation. These optimizations are a subset of full intra-file
interprocedural optimizations. One of these optimizations enables the
compiler to perform inline function expansion for calls to functions
defined within the current source file.
]]>
Multi-file ip optimizations that includes:
- inline function expansion
- interprocedural constant propogation
- dead code elimination
- propagation of function characteristics
- passing arguments in registers
- loop-invariant code motion
]]>
Method used for partitioning. Possible values are:
routine: Creates a single region for each routine.
block: Partitions each routine into one region per basic block.
trace: Partitions each routine into one region per trace.
region: Partitions each routine into one region per loop.
default: The compiler determines which method is used for partitioning.
This option selects the method that the register allocator uses to partition each routine into regions.
When setting default is in effect, the compiler attempts to optimize the tradeoff between compile-time
performance and generated code performance.
This option is only relevant when optimizations are enabled (O1 or higher).
]]>
This option tells the compiler to use aggressive multi-versioning to check
for pointer aliasing and scalar replacement.
]]>
Specifies whether streaming stores are generated.
Possible values are:
always: Enables generation of streaming stores for optimization. The compiler optimizes under the assumption that the application is memory bound.
never : Disables generation of streaming stores for optimization. Normal stores are performed.
auto : Lets the compiler decide which instructions to use.
]]>
This option tells the auto-parallelizer to generate multithreaded code for loops
that can be safely executed in parallel.
To use this option, you must also specify option O2 or O3.
]]>
If the granularity of a loop is greater than the parallelization threshold,
the loop will be executed in parallel.
If you do not specify this option, the compiler may not parallelize loops with
symbolic loop bounds if the compile-time granularity estimation of a loop can not
ensure it is beneficial to parallelize the loop.
-Qpar-runtime-control - disables this feature. (default)
]]>
This option enables or disables prefetch insertion optimization. The goal
of prefetching is to reduce cache misses by providing hints to the processor
about when data should be loaded into the cache.
On IA-32 architecture and Intel 64 architecture, this option enables prefetching
when higher optimization levels are specified.
]]>
(disable/enable[default] -Qprec-div[-])
This option improves precision of floating-point divides. It has a slight
impact on speed.
With some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows),
the compiler may change floating-point division computations into multiplication
by the reciprocal of the denominator.
For example, A/B is computed as A * (1/B) to improve the speed of the
computation.
However, sometimes the value produced by this transformation is
not as accurate as full IEEE division. When it is important to have fully
precise IEEE division, use this option to disable the floating-point
division-to-multiplication optimization. The result is more accurate, with some
loss of performance.
If you specify -no-prec-div (Linux and Mac OS) or /Qprec-div- (Windows), it enables
optimizations that give slightly less precise results than full IEEE
division.
]]>
Instrument program for profiling for the first phase of
two-phase profile guided otimization. This instrumentation gathers information
about a program's execution paths and data values but does not gather
information from hardware performance counters. The profile instrumentation
also gathers data for optimizations which are unique to profile-feedback
optimization.
Instructs the compiler to produce a profile-optimized
executable and merges available dynamic information (.dyn)
files into a pgopti.dpi file. If you perform multiple
executions of the instrumented program, -Qprof_use merges
the dynamic information files again and overwrites the
previous pgopti.dpi file.
Without any other options, the current directory is
searched for .dyn files
]]>
This option enables scalar replacement performed during loop transformation.
To use this option, you must also specify O3.
-Qscalar-rep- disables this feature. (default)
This option tells the compiler to perform a conditional check in a vectorized loop.
This checking avoids unnecessary stores and may improve performance.
-Qvec-guard-write- disables this feature. (default)
]]>
Tells the compiler the maximum number of times to unroll loops.
If you do not specify n, the optimizer determines how many times loops can be unrolled.
]]>
This option tells the compiler to use aggressive, complete unrolling for loops with small constant trip counts.
This option may improve performance.
By default, this feature is OFF.
]]>
Code is optimized for Intel(R) processors with support for SSE 4.2 instructions.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
]]>
Code is optimized for Intel(R) processors with support for SSE 4.1 instructions.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
]]>
This option enables C++ exception handling.
Enables C++ Run Time Type Information (RTTI).
Enable SmartHeap library usage by forcing the linker to
ignore multiple definitions
]]>
Enable SmartHeap library usage by forcing the linker to
ignore multiple definitions
]]>
32-bit MicroQuill SmartHeap Library for Windows available from http://www.microquill.com/
]]>
32-bit MicroQuill SmartHeap Library for Windows available from http://www.microquill.com/
This library is the thread-safe version.
]]>
64-bit MicroQuill SmartHeap Library for Windows available from http://www.microquill.com/
]]>
64-bit MicroQuill SmartHeap Library for Windows available from http://www.microquill.com/
This library is the thread-safe version.
]]>
Library which manages the auto parallel feature/
]]>
set the stack reserve amount specified to the linker
This option tells the compiler to assume there is no aliasing.
Disables inline expansion of all intrinsic functions.
Disables conformance to the ANSI C and IEEE 754 standards for
floating-point arithmetic.
]]>
Allows use of EBP as a general-purpose register in optimizations.
This option enables most speed optimizations, but disables some
that increase code size for a small speed benefit.
]]>
This option enables global optimizations.
Specifies the level of inline function expansion.
Ob0 - Disables inlining of user-defined functions. Note that
statement functions are always inlined.
Ob1 - Enables inlining when an inline keyword or an inline
attribute is specified. Also enables inlining according
to the C++ language.
Ob2 - Enables inlining of any function at the compiler's
discretion.
]]>
This option tells the compiler to separate functions into COMDATs
for the linker.
]]>
This option enables read only string-pooling optimization.
This option enables read/write string-pooling optimization.
This option disables stack-checking for routines with 4096 bytes
of local variables and compiler temporaries.
]]>