|
|
CINT2000 Result Copyright © 1999-2005 Standard Performance Evaluation Corporation |
|
Fujitsu Siemens Computers PRIMERGY TX300 S3, Intel Xeon 5130 processor, 2.0 GHz |
|
| SPEC license # 22 | Tested by: Fujitsu Siemens Computers | Test date: Jul-2006 | Hardware Avail: Jul-2006 | Software Avail: May-2006 |
![]() |
Benchmark | Base Copies |
Base Runtime |
Base Ratio |
Copies | Runtime | Ratio |
|---|---|---|---|---|---|---|---|
| 164.gzip | 4 | 115 | 56.3 | 4 | 115 | 56.3 | |
| 175.vpr | 4 | 101 | 64.5 | 4 | 101 | 64.5 | |
| 176.gcc | 4 | 51.0 | 100 | 4 | 51.0 | 100 | |
| 181.mcf | 4 | 94.0 | 88.8 | 4 | 94.0 | 88.8 | |
| 186.crafty | 4 | 54.9 | 84.6 | 4 | 54.9 | 84.6 | |
| 197.parser | 4 | 117 | 71.4 | 4 | 117 | 71.4 | |
| 252.eon | 4 | 50.5 | 120 | 4 | 50.5 | 120 | |
| 253.perlbmk | 4 | 76.4 | 109 | 4 | 76.4 | 109 | |
| 254.gap | 4 | 57.8 | 88.3 | 4 | 57.8 | 88.3 | |
| 255.vortex | 4 | 60.0 | 147 | 4 | 60.0 | 147 | |
| 256.bzip2 | 4 | 111 | 62.6 | 4 | 111 | 62.6 | |
| 300.twolf | 4 | 132 | 106 | 4 | 132 | 106 | |
| SPECint_rate_base2000 | 88.1 | ||||||
| SPECint_rate2000 | 88.1 | ||||||
|
|
||||||||||||||||||||||||||||||||||||||||||
| Notes / Tuning Information |
|---|
GENERAL
+FDO: PASS1=-Qprof_gen PASS2=-Qprof_use
Portability flags
176.gcc: -Dalloca=_alloca /F10000000
186.crafy: -DNT_i386
253.perlbmk: -DSPEC_CPU2000_NTOS -DPERLDLL /MT
254.gap: -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO
Base tuning flags
for C programs: -fast +FDO shlW32M.lib
for C++ programs: -fast -Qcxx_features +FDO shlW32M.lib
Peak tuning flags
same as baseline (basepeak=true set globally)
The system bus runs at 1333 MHz
This result was measured with 32-bit binaries using the 32-bit version of
the operating system.
BIOS configuration:
Adjacent Sector Prefetch = disable
For information about Fujitsu Siemens Computers in your country please see:
http://www.fujitsu-siemens.com/countries
|
First published at SPEC.org on 10-Aug-2006
Generated on Thu Aug 10 15:53:16 2006 by SPEC CPU2000 HTML formatter v1.01