SPEC® ACCEL™ OMP Result

Intel (Test Sponsor: RWTH Aachen)

Intel Xeon Phi 5110p

Intel Xeon SandyBridge EN/EP processor
(8 core, 2.00 GHz, Intel Xeon CPU E5-2650)

ACCEL license:	055A	Test date:	May-2017
Test sponsor:	RWTH Aachen	Hardware Availability:	Jan-2012
Tested by:	RWTH Aachen	Software Availability:	Nov-2015

Hardware
CPU Name:	Intel Xeon E5-2650
CPU Characteristics:	Intel Turbo Boost Technology 2.0 up to 2.80 GHz
CPU MHz:	2000
CPU MHz Maximum:	2800
FPU:	Integrated
CPU(s) enabled:	16 cores, 2 chips, 8 cores/chip, 2 threads/core
CPU(s) orderable:	1-2 chips
Primary Cache:	32 KB I + 32 KB D on chip per core
Secondary Cache:	256 KB I+D on chip per core
L3 Cache:	20 MB I+D on chip per chip
Other Cache:	None
Memory:	32 GB (8 x 4 GB 2Rx8 PC3-12800R-11, running at 1600 MHz)
Disk Subsystem:	120 GB Intel SSD 320 Series
Other Hardware:	None

Accelerator
Accel Model Name:	Intel Xeon Phi 5110p
Accel Vendor:	Intel
Accel Name:	Intel Xeon Phi 5110p
Type of Accel:	Co-Processor
Accel Connection:	PCIe 2.0 16x
Does Accel Use ECC:	yes
Accel Description:	Intel Xeon Phi 5110p, 60 cores with 4 Threads / core, 1050 MHz, 8GB GDDR5 RAM, no Turbo Boost
Accel Driver:	Manycore Platform Software Stack 3.7.2

Software
Operating System:	CentOS Linux release 7.3.1611 (Core) 3.10.0-514.16.1.el7.x86_64
Compiler:	Version 16.0.1.150 of Intel Parallel Studio XE 2016 for Linux
File System:	nfs
System State:	Run level 3 (Multi-user)
Other Software:	None

Power
Power Supply:	1 x 750 W
Power Supply Details:	Intel DPS-750XB A 750 Watt Hot Swap Power Supply Module
Max. Power (W):	358.03
Idle Power (W):	212.63
Min. Temperature (C):	24.94

Power Analyzer
Power Analyzer:	Power Analyzer
Hardware Vendor:	ZES Zimmer
Model:	LMG450
Serial Number:	12031311
Input Connection:	RS232
Metrology Institute:	PTB (Physikalisch Technische Bundesanstalt)
Calibration By:	ZES Zimmer
Calibration Label:	0431203002
Calibration Date:	2017-01-10
PTDaemon Version:	1.8.1 (a497ea15; 2016-12-20)
Setup Description:	power agent is accessed through WLAN. Power meter is serially connected between power agent and platform to be measured
Current Ranges Used:	2.5A
Voltage Range Used:	250V

Temperature Meter
Temperature Meter:	Temperature Meter
Hardware Vendor:	Digi
Model:	Watchport/H
Serial Number:	(S) W34041766
Input Connection:	USB
PTDaemon Version:	1.8.1 (a497ea15; 2016-12-20)
Setup Description:	positioned in front of intake fan

Base Results Table

Benchmark	Seconds	Ratio	Energy (kJ)	Maximum Power	Average Power	Energy Ratio	Seconds	Ratio	Energy (kJ)	Maximum Power	Average Power	Energy Ratio	Seconds	Ratio	Energy (kJ)	Maximum Power	Average Power	Energy Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.postencil	107	1.02	34.9	353	327	1.02	107	1.02	35.0	354	327	1.02	109	1.00	35.2	338	324	1.01
504.polbm	124	0.986	39.7	347	321	0.989	122	0.996	39.4	347	321	0.998	123	0.995	39.3	346	321	1.00
514.pomriq	622	0.999	185	322	297	1.00	620	1.00	185	317	298	1.00	621	1.00	185	322	298	0.999
550.pmd	241	1.00	73.0	322	303	1.01	242	0.998	73.6	324	305	1.00	241	1.00	73.1	324	304	1.01
551.ppalm	513	1.06	147	311	286	1.06	558	0.974	160	314	286	0.978	554	0.983	159	312	286	0.984
552.pep	230	1.00	73.0	341	317	1.00	230	1.00	72.8	340	316	1.01	230	1.00	72.4	343	314	1.01
553.pclvrleaf	1170	0.979	356	323	305	0.970	1172	0.977	354	322	302	0.976	1149	0.996	349	327	304	0.991
554.pcg	335	0.994	94.4	304	282	0.994	329	1.01	95.4	306	290	0.985	328	1.01	94.9	308	289	0.989
555.pseismic	282	0.999	91.5	351	324	1.01	283	0.997	92.4	356	327	0.995	281	1.00	92.6	358	329	0.993
556.psp	817	1.00	226	306	276	1.01	815	1.00	227	305	278	1.00	816	1.00	226	308	277	1.01
557.pcsp	879	0.977	246	315	280	0.975	876	0.981	244	313	279	0.982	871	0.986	243	312	279	0.985
559.pmniGhost	398	0.998	115	342	289	0.996	398	0.996	114	345	287	1.00	399	0.995	115	349	288	0.995
560.pilbdc	667	0.979	200	327	300	0.979	663	0.984	198	331	299	0.988	653	0.999	196	333	300	0.999
563.pswim	173	0.921	57.7	347	334	0.904	175	0.908	58.0	345	331	0.899	173	0.918	57.8	351	333	0.903
570.pbt	780	1.00	210	296	269	0.997	788	0.989	212	294	269	0.987	782	0.998	211	296	269	0.993

Platform Notes

 Sysinfo program /home/cw585968/Desktop/SPEC/SPEC-075-TEST/Docs/sysinfo
 $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
 running on linuxphic04.rz.RWTH-Aachen.DE Fri May 26 09:23:02 2017

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/accel/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz
       2 "physical id"s (chips)
       32 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 8
       siblings  : 16
       physical 0: cores 0 1 2 3 4 5 6 7
       physical 1: cores 0 1 2 3 4 5 6 7
    cache size : 20480 KB

 From /proc/meminfo
    MemTotal:       32709372 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /usr/bin/lsb_release -d
    CentOS Linux release 7.3.1611 (Core)

 From /etc/*release* /etc/*version*
    centos-release: CentOS Linux release 7.3.1611 (Core)
    centos-release-upstream: Derived from Red Hat Enterprise Linux 7.3 (Source)
    os-release:
       NAME="CentOS Linux"
       VERSION="7 (Core)"
       ID="centos"
       ID_LIKE="rhel fedora"
       VERSION_ID="7"
       PRETTY_NAME="CentOS Linux 7 (Core)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:centos:centos:7"
    redhat-release: CentOS Linux release 7.3.1611 (Core)
    system-release: CentOS Linux release 7.3.1611 (Core)
    system-release-cpe: cpe:/o:centos:centos:7

 uname -a:
    Linux linuxphic04.rz.RWTH-Aachen.DE 3.10.0-514.16.1.el7.x86_64 #1 SMP Wed Apr
    12 15:04:24 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 May 3 11:03

 SPEC is set to: /home/cw585968/Desktop/SPEC/SPEC-075-TEST
    Filesystem                                     Type  Size  Used Avail Use%
    Mounted on
    na6280-3.rz.RWTH-Aachen.DE:/vol/home1/cw585968 nfs   150G   56G   95G  38%
    /rwthfs/rz/cluster/home/cw585968
 Additional information from dmidecode:

    Warning: Use caution when you interpret this section. The 'dmidecode' program
    reads system data which is "intended to allow hardware to be accurately
    determined", but the intent may not be met, as there are frequent changes to
    hardware, firmware, and the "DMTF SMBIOS" standard.


 (End of data from sysinfo program)

Base Compiler Invocation

C benchmarks:

icc

Fortran benchmarks:

ifort

Benchmarks using both Fortran and C:

icc ifort

Base Portability Flags

503.postencil:	-DSPEC_USE_INNER_SIMD
504.polbm:	-DSPEC_USE_INNER_SIMD
514.pomriq:	-DSPEC_USE_INNER_SIMD
550.pmd:	-DSPEC_USE_INNER_SIMD
551.ppalm:	-DSPEC_USE_INNER_SIMD
552.pep:	-DSPEC_USE_INNER_SIMD
553.pclvrleaf:	-DSPEC_USE_INNER_SIMD
554.pcg:	-DSPEC_USE_INNER_SIMD
555.pseismic:	-DSPEC_USE_INNER_SIMD
556.psp:	-DSPEC_USE_INNER_SIMD -DSPEC_ICC16_KNC_WORKAROUND
557.pcsp:	-DSPEC_USE_INNER_SIMD
559.pmniGhost:	-DSPEC_USE_INNER_SIMD -nofor_main
560.pilbdc:	-DSPEC_USE_INNER_SIMD
563.pswim:	-DSPEC_USE_INNER_SIMD
570.pbt:	-DSPEC_USE_INNER_SIMD

Base Optimization Flags

C benchmarks:

-O3 -qopenmp

Fortran benchmarks:

-O3 -qopenmp

Benchmarks using both Fortran and C:

-O3 -qopenmp

The flags files that were used to format this result can be browsed at
https://www.spec.org/accel/flags/Intel-ic16.0-linux64.html,
https://www.spec.org/accel/flags/flags.workaround.flags.html.

You can also download the XML flags sources by saving the following links:
https://www.spec.org/accel/flags/Intel-ic16.0-linux64.xml,
https://www.spec.org/accel/flags/flags.workaround.flags.xml.