SPEC® ACCEL™ OMP Result

Copyright 2015-2017 Standard Performance Evaluation Corporation

Colfax International (Test Sponsor: Indiana University)

Xeon Phi 7210

Ninja Developer Platform Pedestal: Liquid Cooled

SPECaccel_omp_base = 3.40

SPECaccel_omp_energy_base = 4.54

SPECaccel_omp_peak = Not Run

SPECaccel_omp_energy_peak = --

ACCEL license: 3440A Test date: May-2017
Test sponsor: Indiana University Hardware Availability: Aug-2016
Tested by: Indiana University Software Availability: Jan-2017
Benchmark results graph
Hardware
CPU Name: Intel Xeon Phi 7210
CPU Characteristics: Simultaneous multithreading (SMT) on, Turbo off.
CPU MHz: 1300
CPU MHz Maximum: 1300
FPU: Integrated
CPU(s) enabled: 64 cores, 1 chip, 64 cores/chip, 4 threads/core
CPU(s) orderable: 1 to 1 chip
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 1 MB I+D on chip per tile (2 cores)
L3 Cache: None
Other Cache: None
Memory: 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC)
+ 16 GB MCDRAM
Disk Subsystem: Intel S3510 SSD 800GB, SATA3
Other Hardware: None
Accelerator
Accel Model Name: Xeon Phi 7210
Accel Vendor: Intel
Accel Name: Xeon Phi 7210
Type of Accel: CPU
Accel Connection: N/A
Does Accel Use ECC: Yes
Accel Description: Second generation Xeon Phi self-bootable CPU,
SMT on, Turbo off, flat DDR4+MCDRAM
Accel Driver: N/A
Software
Operating System: CentOS Linux release 7.2.1511 (Core)
3.10.0-327.13.1.el7.xppsl_1.3.3.151.x86_64
Compiler: Intel Parallel Studio XE 2017 Update 1 for
Linux, Version 17.0.1.132 Build 20161005
File System: ext4
System State: Run level 3 (multi-user with networking)
Other Software: None
Power
Power Supply: 750W
Power Supply Details: Seasonic SSR-750RM Active PFC F3
Max. Power (W): 286.39
Idle Power (W): 91.01
Min. Temperature (C): 21.69
Power Analyzer
Power Analyzer: 156.56.179.146:8888
Hardware Vendor: ZES Zimmer
Model: ZES LMG450:4-Channel
Serial Number: 01001849
Input Connection: RS232 USB adapter
Metrology Institute: NIST (National Institute of Standards and
Technology)
Calibration By: ZES Zimmer
Calibration Label: 3783190001e
Calibration Date: 02.20.2017
PTDaemon Version: 1.8.1 (a497ea15; 2016-12-20)
Setup Description: connected to the single power supply that powers
the system
Current Ranges Used: 0.0A
Voltage Range Used: 130V
Temperature Meter
Temperature Meter: 156.56.179.146:8889
Hardware Vendor: Digi
Model: Watchport/H
Serial Number: W40236768
Input Connection: USB
PTDaemon Version: 1.8.1 (a497ea15; 2016-12-20)
Setup Description: positioned in front of intake fan

Base Results Table

Benchmark Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Seconds Ratio Energy
(kJ)
Maximum
Power
Average
Power
Energy
Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.postencil 52.4  2.08   12.9   254   245   2.77   54.5  2.00   13.3   252   243   2.69   53.7  2.03   13.2   254   245   2.71  
504.polbm 36.4  3.35   9.79  272   269   4.01   36.6  3.33   9.80  272   267   4.01   36.6  3.34   9.71  271   266   4.04  
514.pomriq 229    2.71   59.8   267   261   3.09   228    2.72   59.3   267   259   3.12   229    2.71   60.0   270   262   3.09  
550.pmd 56.6  4.26   15.2   270   268   4.86   57.6  4.18   15.4   271   268   4.78   58.2  4.14   15.5   268   266   4.75  
551.ppalm 5182    0.105  690     157   133   0.226  5183    0.105  690     157   133   0.226  5181    0.105  690     156   133   0.226 
552.pep 64.7  3.57   15.0   234   233   4.87   64.8  3.57   15.2   236   235   4.82   64.7  3.57   15.2   236   234   4.83  
553.pclvrleaf 166    6.92   40.9   250   247   8.46   166    6.90   40.9   250   247   8.45   166    6.91   40.9   250   247   8.45  
554.pcg 213    1.56   36.8   221   173   2.55   214    1.56   36.7   220   172   2.56   213    1.56   36.7   220   172   2.56  
555.pseismic 101    2.79   21.2   275   210   4.33   101    2.79   21.2   275   210   4.33   101    2.79   21.0   273   208   4.38  
556.psp 64.7  12.6    14.7   236   227   15.5    64.5  12.7    14.7   235   227   15.5    64.8  12.6    14.6   234   225   15.6   
557.pcsp 65.6  13.1    16.3   261   249   14.7    65.8  13.1    16.3   259   247   14.7    65.6  13.1    16.2   260   247   14.8   
559.pmniGhost 210    1.89   41.3   259   197   2.77   210    1.89   41.1   260   196   2.78   210    1.89   41.4   261   197   2.76  
560.pilbdc 80.0  8.17   22.1   285   276   8.87   80.0  8.17   22.3   286   279   8.79   79.8  8.18   22.3   286   279   8.78  
563.pswim 58.1  2.73   13.1   228   225   3.98   58.4  2.72   13.2   228   226   3.95   58.1  2.74   13.2   228   227   3.96  
570.pbt 51.6  15.1    10.5   207   204   19.8    51.4  15.2    10.6   208   205   19.8    51.4  15.2    10.5   207   205   19.8   

Submit Notes

The config file option 'submit' was used.
submit = numactl -p 1 $command

Platform Notes

 Sysinfo program /home/lijunj/spec/accel-test/75/Docs/sysinfo
 $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
 running on knl1.uits.indiana.edu Tue May  2 11:07:12 2017

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/accel/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon Phi(TM) CPU 7210 @ 1.30GHz
       1 "physical id"s (chips)
       256 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 64
       siblings  : 256
       physical 0: cores 0 1 2 3 6 7 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26
       27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
       52 53 56 57 58 59 60 61 62 63 64 65 68 69 70 71 72 73
    cache size : 1024 KB

 From /proc/meminfo
    MemTotal:       115193108 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /usr/bin/lsb_release -d
    CentOS Linux release 7.2.1511 (Core)

 From /etc/*release* /etc/*version*
    centos-release: CentOS Linux release 7.2.1511 (Core)
    centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source)
    os-release:
       NAME="CentOS Linux"
       VERSION="7 (Core)"
       ID="centos"
       ID_LIKE="rhel fedora"
       VERSION_ID="7"
       PRETTY_NAME="CentOS Linux 7 (Core)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:centos:centos:7"
    redhat-release: CentOS Linux release 7.2.1511 (Core)
    system-release: CentOS Linux release 7.2.1511 (Core)
    system-release-cpe: cpe:/o:centos:centos:7

 uname -a:
    Linux knl1.uits.indiana.edu 3.10.0-327.13.1.el7.xppsl_1.3.3.151.x86_64 #1 SMP
    Fri Jun 10 15:04:35 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 May 2 10:51

 SPEC is set to: /home/lijunj/spec/accel-test/75
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda3      ext4  713G  174G  503G  26% /

 Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'

 (End of data from sysinfo program)

General Notes

BIOS settings:
  Intel Simultaneous Multithreading (SMT): on
  Intel Turbo Boost Technology (Turbo)  : off
  Cluster Mode: quadrant
  Memory Mode: flat
  (MCDRAM is partitioned to the second NUMA node)

Current range for power measurement is 2.5A.

Base Compiler Invocation

C benchmarks:

 icc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

503.postencil:  -DSPEC_USE_INNER_SIMD 
504.polbm:  -DSPEC_USE_INNER_SIMD 
514.pomriq:  -DSPEC_USE_INNER_SIMD 
550.pmd:  -DSPEC_USE_INNER_SIMD   -80 
551.ppalm:  -DSPEC_USE_INNER_SIMD 
552.pep:  -DSPEC_USE_INNER_SIMD 
553.pclvrleaf:  -DSPEC_USE_INNER_SIMD 
554.pcg:  -DSPEC_USE_INNER_SIMD 
555.pseismic:  -DSPEC_USE_INNER_SIMD 
556.psp:  -DSPEC_USE_INNER_SIMD 
557.pcsp:  -DSPEC_USE_INNER_SIMD 
559.pmniGhost:  -DSPEC_USE_INNER_SIMD   -nofor-main 
560.pilbdc:  -DSPEC_USE_INNER_SIMD 
563.pswim:  -DSPEC_USE_INNER_SIMD 
570.pbt:  -DSPEC_USE_INNER_SIMD 

Base Optimization Flags

C benchmarks:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

Fortran benchmarks:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

Benchmarks using both Fortran and C:

 -O3   -qopenmp   -qopenmp-offload=host   -xMIC-AVX512 

The flags files that were used to format this result can be browsed at
https://www.spec.org/accel/flags/Intel-ic17.0-linux64.html,
https://www.spec.org/accel/flags/colfax-knl.html.

You can also download the XML flags sources by saving the following links:
https://www.spec.org/accel/flags/Intel-ic17.0-linux64.xml,
https://www.spec.org/accel/flags/colfax-knl.xml.